athlon64 overclock record. all owners please post

[cpulloverclock]

so 2270 for 36s

http://membres.lycos.fr/cpulloverclock79/36s..JPG
45s at 1784MHz
274.5*6.5/7 = 254.9

http://membres.lycos.fr/cpulloverclock79/45s.JPG

[misteroadster]

Originally posted by andyddr
A little unfair IMO. Fx53 has higher mem timings and lower FSB. Obvious that it would come second. But the fact that it still beats 3200+ in some tests show`s it`s a better chip.
i'm not agree with you , okay the 3200+ got 260 Fsb but the memory bandwith is very lower than FX.

In fact , the things you should understand on this graphic are :
-Dual channel is not indispensable pifast excluded (A64 soon ddr500 stock)
-Ecc is very bad.

[andyddr]

Wow 36s at only 2.27G. That is the standard A6 not FX right?

[Ravilj]

what cpu's are those for the 36s and 45s run?

[misteroadster]

yes cpull use 3400+ 1Mo L2

[CodeRed]

Man I just realised that I hadnt put my 3400+ scoresz in this thread :p:

Here's some pifast
http://users.tpg.com.au/spark69/an50r/pifast42.23.jpg

and some SuperPi. I didnt push SuperPi any further as the score aint gonna get any better until I cross the 2970 barrier.
http://users.tpg.com.au/spark69/an50r/superpi30.jpg

and a max (very unstable) screenie
http://users.tpg.com.au/spark69/an50r/cpuz3060.jpg

Also does 3dmark up to 2947, and sandra crapola up to 2970

[misteroadster]

fine codered !!
i want to congratulate you for your ti4600 3Dmark performance , i tried to beat you with my Fx53 , but i just broke my nose :D.
your ti must be very optimised ;)

[andyddr]

misteroadster I see your point now. But still 60FSB is quite a bit of bandwidth.

[misteroadster]

yes , i think A64+ 1Mo L2 needs 4000 in sandra mem bandwith to be most powerfull than FX53 at same frequency , after it's just a question of final frequency.
At 240X10 5/3/3/3 i got the same score 3Dm2001 than FX53 at 200X12 5/2/3/2

[CodeRed]

Originally posted by misteroadster
fine codered !!
i want to congratulate you for your ti4600 3Dmark performance , i tried to beat you with my Fx53 , but i just broke my nose :D.
your ti must be very optimised ;)

Thanks man.

Yeah, my drivers and settings are quite tweaked. What GPU/mem clocks were you using for that 20600 run? My guess is 350/750 based on your nature score, is that close?

Firstly try win2k + DX 8.1 + 42.51 drivers
order the tests as follows
Lobby low
Car High
Lobby High
Drag Low
Drag High
Nature
Car Low (repeat as often as necessary)

LOD=3.6 for lobby and 4.1 for the rest

[misteroadster]

yes , i forgot my settings , there was about 350/750 yes , in fact i had to confess that i concentrate on 9700pro title.
I ve modded my 4800 in 1 hour , put it in my chiller , and runned 3Dmark.
But i ll come back man :)
Thanks a lot for your advices. ;)

my mini 35s on 3200+ K8Npro BH-5 KHX3200 2X256 only 3,34vddr
i want to freeze my ram and increase vio.
http://pageperso.aol.fr/misteroadster/mini35s.JPG

[misteroadster]

What do you think about that ?
it explain that coeff 4 go higher than the others.
Latency are increased at coeff X4
http://pageperso.aol.fr/misteroadster/Mbenchtest.JPG

[cpulloverclock]

Originally posted by Ravilj
what cpu's are those for the 36s and 45s run? a 3400+, and 2811MHz with 1.8v, I can see 3GHzhttp://membres.lycos.fr/cpulloverclock79/350.JPG

[gabbax]

Originally posted by CodeRed
Man I just realised that I hadnt put my 3400+ scoresz in this thread :p:

Here's some pifast
http://users.tpg.com.au/spark69/an50r/pifast42.23.jpg

and some SuperPi. I didnt push SuperPi any further as the score aint gonna get any better until I cross the 2970 barrier.
http://users.tpg.com.au/spark69/an50r/superpi30.jpg

and a max (very unstable) screenie
http://users.tpg.com.au/spark69/an50r/cpuz3060.jpg

Also does 3dmark up to 2947, and sandra crapola up to 2970 :slobber: m8, thats goooood, damn good numbers.

maybe 1.9 was to tiny for my processor to get past 2802 mhz:/

:toast:

[Orak]

Woho :) im over 25k in 3dmark01 now..
But my nature is veery low, I dont know why..
I used nForce 2.45 and Catalyst 3.5..

2460mhz 273*9 1:1 Gigabyte K8N vcore mod and vmem
Radeon 9800 PRO 500/371 Only VGPU mod
KHX PC3000 2.5-2-2-5-10-16

http://home.no.net/geekporn/asd/25160.bmp

[cpulloverclock]

what did you do to have 273 1:1 with ur PC3000 and K8N Pro?
it's about the IRQs?

[andyddr]

Radeon 9800 PRO 500/471 Only VGPU mod

OMW 471 on the mem on a 9800PRO!!!!

Sorry off topic but that is really impressive Orak.

[misteroadster]

i compare FX53 and 3200+ Overclocked to the max :
http://www.think-hardware.com/article.php?ida=43&page=page1

[gabbax]

Originally posted by andyddr
Radeon 9800 PRO 500/471 Only VGPU mod

OMW 471 on the mem on a 9800PRO!!!!

Sorry off topic but that is really impressive Orak. 471 without any kinda mods...hmm he just propably wright it down wrong, 371 i buy it, but not 471 with out any mods @ all.

And 158 in Nature, its already done, no 471 there;)

[Marquzz]

Originally posted by Orak
Woho :) im over 25k in 3dmark01 now..
But my nature is veery low, I dont know why..
I used nForce 2.45 and Catalyst 3.5..

2460mhz 273*9 1:1 Gigabyte K8N vcore mod and vmem
Radeon 9800 PRO 500/471 Only VGPU mod
KHX PC3000 2.5-2-2-5-10-16

*snip*


You must mean 371 MHz on the mem...

[Orak]

Hehe, sorry boys, its 371 on the Radeon mem.. :(

[cpulloverclock]

and for my question?

[Orak]

Originally posted by cpulloverclock
what did you do to have 273 1:1 with ur PC3000 and K8N Pro?
it's about the IRQs?

K8N -non pro, but anyway.. 3.7v at the ram.. and cl2.5.. thats the trick

[EmineM]

CodeRed, what cooling on that 3400+

[CodeRed]

Originally posted by EmineM
CodeRed, what cooling on that 3400+

R404a modded prommy

Its a good chip I think, now I just need some memory to match :)

[Astennu]

I have seen a A64 ADA3000 AEP4AX CBASC 0406UPMW in action It did 2600 pifast stable @ 1.67 v

http://server6.uploadit.org/files/Stinger666-PiFast48sec.JPG

Tis @ Boxed cooling. But pifast woud only run 1 time. 2550 was no problem. The cpu could do more when he is gonna use beter cooling. Maybe a 3.0 @ Prom M II GT ?

[cpulloverclock]

with my shuttle

I have a K8n Pro, An50R and a K8NHA Pro :)
http://membres.lycos.fr/cpulloverclock79/37s......JPG
http://membres.lycos.fr/cpulloverclock79/34s.JPG
http://membres.lycos.fr/cpulloverclock79/memory.JPG

[fxr91]

Firstly, hi guys. Been browsing here for a long time and finally decided to drop in from OCAU :)

Un-modded AN50R, so ram is at 5:6, but I am trying to get some BH-5 and do some mods soon to the board, so fingers crossed :) Cooled with an LS.

For info, the mutliplier is at default (11) so with some good ram, vmods, and a drop of the multi should prove to provide some fun results :) I was thinking of dropping the ram ratio right down and push this chip just to see what I can max the cpu at :)

CPU- CAATC 0351XPMW

http://users.bigpond.net.au/fxr91/A64.jpg

[EmineM]

nice, get a vcore mod going mate... you could reach even much more :)

[fxr91]

Yep, vmods are next on the cards :) The way I see it, if I get the chip to that speed on default voltage @1.68, it should go further around 1.8 :cool:

I have the trimpoits sodlered up, just gotta get the guts to solder to the board now. Got an old dead 8RDA+ here I will be practicing on :toast:

[cpulloverclock]

My second 3400+ is very bad
2.8GHz at 1.75v unstable
2.84 at 1.8v or 1.9v

there is a problem

[Boogotop]

look what i got ;) don't take attention to the vcore...it's just cause i've keep the setting of my 3200+

it's the first boot i can't test today but tommorow i will try to clock it ;)
3400+ CG core :)

0408

(EDIT) 2700mhz @1.7v stock Mach 1 cooled
http://sites.rapidus.net/maxbleau/3400+%20CG.JPG

http://sites.rapidus.net/maxbleau/3400+cgpic.JPG

[cpulloverclock]

good but CG core isnt better in oc

[CrashOv3r1De]

Boogtop yup nice chip you got there. I am facing similar results with my CAAOC TMPW err something like that. 2.75ghz @ 1.7v stock mach2. These chips seem to be doing very well

[Boogotop]

Originally posted by CrashOv3r1De
Boogtop yup nice chip you got there. I am facing similar results with my CAAOC TMPW err something like that. 2.75ghz @ 1.7v stock mach2. These chips seem to be doing very well

i got strange thing with this chip...i can't get it prime stable at 2.6ghz but i can run SuperPI and 3dmark around 2.85-2.9ghz

it's look like at any speed over 2.6ghz he are unstable in some prog like Prime and Pifast but he is 3d benchable at 2.9ghz :confused:

max stable:

Prime95: 2.55ghz@1.65v
Pifast: 2.6ghz @1.7v
SuperPI 1M: 2.85ghz@1.85v
3dmark01:2.9ghz@1.85v

[The Stilt]

Got this (http://mbnet.fi/elixir/A64_3400/0401SPMW.jpg) one yesterday.

With stock cooler and fan / tim, SuperPI runs through 2508MHz (http://mbnet.fi/elixir/A64_3400/SPI-8M-1.PNG)

Im going to throw it under R404 modded Mach2, as soon I get Mach2 socket 754 cpu-kit. My reseller had none left of them :(

[cpulloverclock]

Originally posted by The Stilt
Got this (http://mbnet.fi/elixir/A64_3400/0401SPMW.jpg) one yesterday.

With stock cooler and fan / tim, SuperPI runs through 2508MHz (http://mbnet.fi/elixir/A64_3400/SPI-8M-1.PNG)

Im going to throw it under R404 modded Mach2, as soon I get Mach2 socket 754 cpu-kit. My reseller had none left of them :( I 've the same proc and only 2850MHz in bench at 1.8-1.85v
2710 at 1.67v
too bad

[cpulloverclock]

http://membres.lycos.fr/cpulloverclock79/363.JPG
http://membres.lycos.fr/cpulloverclock79/462.JPG
294.75 1:1 = World record with an A64 and in single??
http://membres.lycos.fr/cpulloverclock79/4599.JPG

in synch mode with my kingston HyperX PC3200
http://membres.lycos.fr/cpulloverclock79/303.75.JPG
http://membres.lycos.fr/cpulloverclock79/365.63.JPG
http://membres.lycos.fr/cpulloverclock79/367.9.JPG
http://membres.lycos.fr/cpulloverclock79/369.JPG
http://membres.lycos.fr/cpulloverclock79/glace.JPG

[LikwidKool]

I just got an A64 in and it reads:
ADA3200AEP5AR
CAAPC 0408TPMW
9561925C40400

Funny but it looks exactly like Boogotop's 3400+. I haven't been able to run it yet, as I am still waiting for my K8Npro to come in. Should be up by tommorow. I am looking forward to some AMD goodness! It's been a while oh green one!:)

[Tom Holck]

Just done this with my new FX-53
Still the "old" Cascade -112C :slobber:

[Boogotop]

Originally posted by Tom Holck
Just done this with my new FX-53
Still the "old" Cascade -112C :slobber:

:slobber: :slobber: :slobber: :D

brutal clock here!!!

[Orak]

I hope you have a gfx handy for your cpu Tom Holck :)

[SAKIC]

would you give an a64 2 volt for a long time ?

or how much would you give for a long time ?

[cpulloverclock]

my an50r is detected in Biostar K8NHA Pro and all the timings are available

no problem to boot in cas2.5 with my kingston HyperX PC3200!!!!!

[T@nker-xXx]

my a64 3000+
http://membres.lycos.fr/thetankerx/k8npro/3000+0350xpmw/3003.jpg
http://membres.lycos.fr/thetankerx/k8npro/fccold/DSCN0129.JPG http://membres.lycos.fr/thetankerx/k8npro/fccold/DSCN0128.JPG

i could pi 1Mo at 2868
i think with the best reglage of my phase change i could pi at 2880/2900 :/

http://membres.lycos.fr/thetankerx/k8npro/3000+0350xpmw/
http://membres.lycos.fr/thetankerx/k8npro/fccold/

[misteroadster]

Good Job tyo ;)
good chip too XPMW 0350 pawaaaahhhhhh :D

[T@nker-xXx]

mister where are your xpmw :banana: :p:

[misteroadster]

:smileysex

[LikwidKool]

so I been toying around with this chip. I had 250X10 last night prime stable at 1.7v but this morning I could not boot windows. I Had to bump down to 245x10 in order to load windows. Looks like I need the vcore mod. What do you guy's suggest as a 'safe' vcore range for a watercooled 3200+.

Also I had some real problems running 2x512 of bh-5. Wouldn't overclock even to 205. 2x512 of pc3200 OCZ EB worked well, but I cannot manually change the timings or the system will hang on POST. Only in nvidia system utility will the timings change.

So I am gonna now see how low I can get this vcore at 245. Not much I think but it's worth a shot.

[Primal]

After reading this thread I decided to buy A64 3200+ (moving from 2.4c @ 3.6)
So, what is the best stepping for this CPU?

One more question:
Should I go for the GA-K8N Pro or AN50R?

thx
And sorry if my english is incorrect
Im french :P

[LikwidKool]

woops I meant to edit.

[nutcase]

Originally posted by Primal
After reading this thread I decided to buy A64 3200+ (moving from 2.4c @ 3.6)
So, what is the best stepping for this CPU?

One more question:
Should I go for the GA-K8N Pro or AN50R?



Both are Good Motherboards..

I like the AN50R because I can get up to 4V Vdimm with Mods.. But this Mobo has killed a lot of Cpu's. I blew up one of my A64's just by clearing Cmos :mad: But, This won't happen on an Unmodded Mobo..

The K8N pro, I think is a little more stable Motherboard out of the Box..

[SAKIC]

hi i will not be angry but can i have a answer please ? if it sounds bad sorry for my english
would you give an a64 2 volt for a long time ?

or how much would you give for a long time ?

[SAKIC]

hmm wich board ist the best for overclocking with an amd a64
i think at the GA-K8N Pro but i need good voltmods an i hope it will be about 300 fsb(HTT) with pc 4400 memory what du you mean can i get this result ? 300 fsb (HTT) ??

[cpulloverclock]

my best fsb with my k8n pro :

http://membres.lycos.fr/cpulloverclock79/391.5.JPG

[Sniper Z]

nothin big i jus got my amd 64 to 2.3 ghz

[Nyge]

Originally posted by SAKIC
hi i will not be angry but can i have a answer please ? if it sounds bad sorry for my english
would you give an a64 2 volt for a long time ?

or how much would you give for a long time ?
2V is a bit high for 24/7. But if you have phase-change like your sig says, I think 2V should be fine.
Personally I have had 2.05 V, even with watercooling, but only during testing and benchmarking.

[n00by]

Asus k8v unmodded 1005bios, Corsair bh-5 blablabla..... Thermalright SLK-948U cooled with crappy 2800rpm fan :p:

[n00by]

Oh yeah, the chip is a DTR :)

24k run in 3dmark01 :banana: 510/365 unmodded cept cooljag heatsink.

Compare URL (http://service.futuremark.com/compare?2k1=7806168)

[Tom Holck]

Now I can whrite this, an bee on desktop pas 3400 Mhz.
The contact is better and the corevolt raised from 2.080 to 2.096 (2.112 safe)

[cpulloverclock]

a test at 200.00 with my shuttle AN50R and K8NHA Pro bios :

4*200 = 2366/2337
5*200 = 2955/2919
6*200 = 3150/3116
7*200 = 3138/3137
8*200 = 3132/3131
9*200 = 3123/3124
10*200 = 3143/3144
11*200 = 3154/3154 = 98.6%

TIMINGS : 7-16-(cas2)-2-2-5-2-1-1 1*1552 I believe


with my kingston HyperX PC3200 :

http://membres.lycos.fr/cpulloverclock79/297.JPG

[Primal]

Can someone answer my first question?
What is the best stepping for Athlon64 3200+?
(should i go on the CPU from the newest date?)

thx..

[SmokeyTheBandit]

Originally posted by cpulloverclock
a test at 200.00 with my shuttle AN50R and K8NHA Pro bios :

4*200 = 2366/2337
5*200 = 2955/2919
6*200 = 3150/3116
7*200 = 3138/3137
8*200 = 3132/3131
9*200 = 3123/3124
10*200 = 3143/3144
11*200 = 3154/3154 = 98.6%

TIMINGS : 7-16-(cas2)-2-2-5-2-1-1 1*1552 I believe


with my kingston HyperX PC3200 :

http://membres.lycos.fr/cpulloverclock79/297.JPG

Nice overclock m8 are you running K8NHA Pro bios on your an50r ?
If so wich version :D

[n00by]

cpulloverclock does that shuttle board of yours have agp/pci lock?

[misteroadster]

nforce3 150 have apg/pci locked , you just had to set FSB to 201 in bios.

[cpulloverclock]

Originally posted by SmokeyTheBandit
Nice overclock m8 are you running K8NHA Pro bios on your an50r ?
If so wich version :D yes with a K8NHA eeprom and the last bios

no problem but 4622/4627 is with an An50R eeprom

[cpulloverclock]

Originally posted by misteroadster
nforce3 150 have apg/pci locked , you just had to set FSB to 201 in bios. exactly

[SmokeyTheBandit]

Originally posted by cpulloverclock
yes with a K8NHA eeprom and the last bios

no problem but 4622/4627 is with an An50R eeprom

Did you experience some positive results with this combination ?
If so could you tell us :D :toast:

Did you program the eeprom of the shuttle with winflash ?

And my last question where did you get the K8NHA eeprom ;)

[cpulloverclock]

Originally posted by SmokeyTheBandit
Did you experience some positive results with this combination ?
If so could you tell us :D :toast:

Did you program the eeprom of the shuttle with winflash ?

And my last question where did you get the K8NHA eeprom ;) yes it's better
from my K8NHA of course :D

I didn't reprogram this eeprom

[andyddr]

Originally posted by misteroadster
nforce3 150 have apg/pci locked , you just had to set FSB to 201 in bios.

At last someone who agrees with me 390FSB and some ppl still saying PCI is unlocked!

Well done BTW cpulloverclock!

[Primal]

Hello.
I'v got an option to hand-pick an A64 3200+. :toast:
Which stepping should I go on (full stepping details please)? which week?
I'm kinda confused...

- sorry for my english, i'm terribly tired. :stick:

[EmineM]

Look for a green one.

Sofar all my CAAOC 0352XPMW went above 2,4 on air.

Important is that its somewhere during weak 0351 - 0359 those go really nice.. .and XPMW is also kinda important cause Ive seen those go really far on phase change.
My a64 3400+ went 2600 mhz on air... (XPMW) of course

[SmokeyTheBandit]

Originally posted by EmineM
Important is that its somewhere during weak 0351 - 0359 those go really nice.. .and XPMW is also kinda important cause Ive seen those go really far on phase change.
My a64 3400+ went 2600 mhz on air... (XPMW) of course

You mean week 0352 i asume ;):)

[EmineM]

ye as long as its 0352... my A64 3400+ 040 didnt go so far..

[=[PULSAR]=]

Whats the best OC for a 3200+ on TEC cooling? Was looking into getting the new ZNF3-250 and v-moddin it.

[Primal]

Great, thanks for the help!
So if i'll find a CAAOC XMPW 0352 CPU overclocking is guaranteed? :toast:
Oh, The borad is AN50R and the mem is KHX PC3500 BH5.
(GPU is R9800XT)

;)

[cpulloverclock]

AMD have released a new Athlon 64 Driver version 1.0.1.0. Another AMD Athlont 64 Processor Utilities and Updates can be found here. Guys, if it aint broke then don't fix it.

This package is recommended for users whom desire a graphical user interface for installation. This .EXE driver is a user friendly localized software installation of the driver designed for end-users.


http://www.amd.com/us-en/assets/content_type/utilities/amdcpu.zip
http://www.amd.com/us-en/assets/content_type/utilities/amdcpu.exe

http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_871_9706,00.html

[cpulloverclock]

no change with my win2k3 Sp1 1159

[cpulloverclock]

my new frequency for 37s
http://membres.lycos.fr/cpulloverclock79/tt.JPG
http://membres.lycos.fr/cpulloverclock79/37.JPG

[Orak]

Ah, finaly got my r404 modded vapochill up and running, but my cpu isnt doing any good, it tops at 2576mhz at 1.84v in 3dmark.. :( its an "old" cpu so.. 0330MPMW.. this is a prototype vapochill so it dosnt have a definition like PE,XE etc :) But i have a new A64 3200 in my mail soon so.. ill hope for 26k+ with this one :)

[kakaroto]

Don't know if i posted my scores:

CAATC 0404XPMW "0256"

mobo: Shuttle AN50R rev 1.3 (voltmodded)
mem 1:1 @3.2v
OS: XP prof.
cooling: Asetek Waterchill KT12 with Airplex dual rad (120mm SUNON)

http://www.xs4all.nl/%7Efamchow/A64_3000/Pifast_2.62GHz.PNG


http://www.xs4all.nl/%7Efamchow/A64_3000/2655.JPG

:D

[sexsymbol]

Originally posted by misteroadster
nforce3 150 have apg/pci locked , you just had to set FSB to 201 in bios.
With the AGP you have to set it to 67 to get it lock right??

[SAKIC]

where can i get r404 for my mach 2 i will change it from r124 will i get more performance if i will change it ?

[afireinside]

Heres my new 3000+ on a VNF3-250 Chaintech board. Stock air for now so nothing special. What part of the stepping is the "stepping" we care about on the A64's?

ADA3000AEP4AX
CBAPC 0404VPFW
9847235B40119

3x LDT multi. Had it at 4x with 220 HTT than I set it down. How high can the HT on the chips go? 166 fsb ram divider set in BIOS because I dont feel like spending alot of time messing with my BH5 at only 2.9V. Vcore is set to 1.65V in BIOS but as you can see MBM5 and CPUZ report it as almost 1.7V and sometimes a bit over 1.7V.

[bias_hjorth]

Originally posted by SAKIC
where can i get r404 for my mach 2 i will change it from r124 will i get more performance if i will change it ?

You almost certain get an increase in terms of performance :) btw. I believe you mean r134a :)

[misteroadster]

i'm testing an K8NSNXP (K8NNXP NF3 250)
HTT 4X240=960Mhz
difference with FX53 is 1sec at same freqs :
9/10/5/2/2/2
2400/200 ram (10X240 desynch166) superpi 1M : 36S
http://pageperso.aol.fr/misteroadster/K8nsnxp+2400-200.JPG

[bias_hjorth]

looking g8 misteroadster...
tried lowering LDT at the same speed and wrote down the spi number? Could be interesting :)

[misteroadster]

LDT 2X or 3X do the same time.
this mobo is so similar but very different than K8Npro.
With K8Npro or other nf3150 , when you launch a bench the vcore raise down ; on this one it raise up of 0,07v , and i could hit 1,8vcore(1,83v Cpu-z) stable aircool (thermaltake silent boost).
Also i have a gain ; about 40 mhz.
Clockgen support only multiplier :/
I'll mod it and put it in my chiller soon.

[afireinside]

Intresting... 512k more L2 cache and 1x higher LDT nets you 2S... How high can these chips/boards go with 4x LDT? 1ghz before one craps out?

[cpulloverclock]

Originally posted by misteroadster
i'm testing an K8NSNXP (K8NNXP NF3 250)
HTT 4X240=960Mhz
difference with FX53 is 1sec at same freqs :
9/10/5/2/2/2
2400/200 ram (10X240 desynch166) superpi 1M : 36S
http://pageperso.aol.fr/misteroadster/K8nsnxp+2400-200.JPG I get 36s at 240*10 in asynch mode with my K8N pro and 36s at 241*10 always in asynch mode with my AN50R

for cpumark I get 307 at 240*10 with my shuttle in asynch mode

[misteroadster]

okay , no difference for superpi :/

[cpulloverclock]

my higher pci and agp with a ibm and 5200 pci
no problem of stability

I am limited by clockgen
http://membres.lycos.fr/cpulloverclock79/315.JPG

[cpulloverclock]

I improve with my P4C800 and setfsb
too easy

http://membres.lycos.fr/cpulloverclock79/recordagppci.JPG

[SAKIC]

@ bias_hjorth

im german can you speak german ?? if yes can you send me a question on german i could not undertand all but yes i mean r134

with r134 =-34°C
with r404 = -50°C ????????? is that posible

[bias_hjorth]

Nein ich spreche nur ein bischen german.. :)
-50 would be on the "evap" temp stated on the Mach unit.. but yes that should be possible :)

[Formann]

-50c with r404a is quite possible..

r404a evaporates @ -50c / .82bar and thats no problem. I would guess a machII can manage pulling a .7bar vacum which gives -53c

[Endre]

Holy crap, cpulloverclock :D

[cpulloverclock]

Originally posted by Endre
Holy crap, cpulloverclock :D thx :)
I want more

[afireinside]

2.5ghz :D Stock HSF+SF2 sitting on top

3dmark link (http://service.futuremark.com/compare?2k1=7827039)

Heres superPI:

[The Stilt]

Damn, Im losing my mind with this 3400+ cpu :(
It can run benches like Pifast at 2529MHz with stock cooling, but when I put it under r404 modded prommy (+ enchanced condenser) it can run easily 2600MHz with 1.55V. If I raise voltage to ex. 1.72V and try 2700MHz it isnt stable at all, because temps rise too high. After little SuperPI run bios show +6c - +13c temps, even lcd front panel says -56c (temp sensor was calibrated during r404 mod, so its accurate) :mad:

I have checked contact three times, and it have allways been perfect (perfect TIM print in IHS).

Is there a problem in contact between heatspreader and core, or what? With P4 3.4C overclocked to 4.3GHz, temps were near -40c at idle so this isnt a prommy issue.

[bias_hjorth]

tried higher vcore for 2700mhz.. seems a bit low to me :)

[The Stilt]

Originally posted by bias_hjorth
tried higher vcore for 2700mhz.. seems a bit low to me :)

Its not about low vcore, but too high temps. I have tried to raise vcore up to 1.9V, but it works even worse because temps raise even higher.

[bias_hjorth]

you sure the evap head isnt bended or non flat or what have you?...havent heard of that bad contact between heatspreader and cpu.. :)

[The Stilt]

Originally posted by bias_hjorth
you sure the evap head isnt bended or non flat or what have you?...havent heard of that bad contact between heatspreader and cpu.. :)

Evap temps are good (too good :rolleyes: ) and contact between evaporator and heatspreader is perfect. Because chip overclocks so well with stock cooling, I cant really believe that contact between heatspreader and core is bad :(

Dunno whats wrong with it, but I selling the chip away and getting a prescott instead :D

[cpulloverclock]

I'm testing my AN50R with a K8NNXP 940 bios

[SAKIC]

@bias_hjorth

your german ist ok the first sentences was right
hmm ok i think about this to change it r134 out and r404 in !!

but thanks for your answer

[bias_hjorth]

willkommen.. :D

[CodeRed]

Originally posted by cpulloverclock
I'm testing my AN50R with a K8NNXP 940 bios

I'll be interested to see what comes of this :)
What gains are you expecting?

Did you have to do anything special to get this Gigabyte BIOS to work with the AN50R?

[afireinside]

Up to 2.55 SuperPI and 3dmark stable :D
2.6 gives me a round error in SuperPI which means more volts right? Gona Vmod this weekend hopefully :)

Cooling=stock HS with SF2

[Endre]

Originally posted by cpulloverclock
thx :)
I want more
Good luck, you crazy dude :D

[cpulloverclock]

Originally posted by CodeRed
I'll be interested to see what comes of this :)
What gains are you expecting?

Did you have to do anything special to get this Gigabyte BIOS to work with the AN50R? no gain, a bios K8NHA+ is best

awdflash ****.bin /f = reprogram the boot block /cc = clear cmos

[Shade00]

You're using a Biostar BIOS on the AN50R? That's nuts. Interesting, though... what made you think to do that? What kind of cross-board problems are there? Any advantages?

[nutcase]

Just to let you guys know.. NEVER Buy a A64 2800+.. Have had 2 of them and neither lasted an hour before Dying..

First one lasted 1 hour Then would not Post.. Some slight Overclocking...

The second one lasted 15 Minutes and was at Stock the whole time :eek:

[Nyge]

Originally posted by hag6br
Just to let you guys know.. NEVER Buy a A64 2800+.. Have had 2 of them and neither lasted an hour before Dying..

First one lasted 1 hour Then would not Post.. Some slight Overclocking...

The second one lasted 15 Minutes and was at Stock the whole time :eek:
At that point I would be looking for a new mobo or psu or something else.

[nutcase]

Originally posted by Nyge
At that point I would be looking for a new mobo or psu or something else.

Nope.. My 3200+ has been through Hell and Back and still keeps running.. That includes a Vcore as High as 2V and Vdimm as high as 4V and it still runs great... BTW, the Mobo is a Shuttle AN50R..

The 2800+ 's just did not make it..

[CAL930]

http://cal930.hp.infoseek.co.jp/AN50R10428S.png

CLOCK:3019.52MHz@(274.50MHz x11j
CPU: Athlon64 3400+ CAATC 0406RPMW
CPUCOOLING: “º“’“ۂ݁iDRYICE+ƒƒ^ƒm[ƒ‹jiroom temp16Žj
Vcore: 1.80V
Vddr: 3.43V
Vio: 3.40V
M/B: Shuttle@AN50R:moding(Rev1.3)
bios:K8NHA Pro 0319
Power suplly: AOPEN FSP530-60GN
Memory: TWINMOS BH-5 2462D 256MB
Memoryseting: AUTO LDT~1 CL2.5@8-12-2-2-5-2-2-‚P-2 1~2064
HDD: Maxtor 6Y080P0
OS: Windows win2003

Hi!
BIOS of K8NHA Pro was put into AN50R. a result -- 3019MHz -- superpi -- 28s -- it was able to obtain . However, K8NHA Pro can obtain 28s by 2970MHz.

[bias_hjorth]

Sick.. WC with a a64 right?

great to sick the japanese join the sickness.. Now is gonna be whicked :)

[cpulloverclock]

Originally posted by CAL930
http://cal930.hp.infoseek.co.jp/AN50R10428S.png

CLOCK:3019.52MHz@(274.50MHz x11j
CPU: Athlon64 3400+ CAATC 0406RPMW
CPUCOOLING: “º“’“ۂ݁iDRYICE+ƒƒ^ƒm[ƒ‹jiroom temp16Žj
Vcore: 1.80V
Vddr: 3.43V
Vio: 3.40V
M/B: Shuttle@AN50R:moding(Rev1.3)
bios:K8NHA Pro 0319
Power suplly: AOPEN FSP530-60GN
Memory: TWINMOS BH-5 2462D 256MB
Memoryseting: AUTO LDT~1 CL2.5@8-12-2-2-5-2-2-‚P-2 1~2064
HDD: Maxtor 6Y080P0
OS: Windows win2003

Hi!
BIOS of K8NHA Pro was put into AN50R. a result -- 3019MHz -- superpi -- 28s -- it was able to obtain . However, K8NHA Pro can obtain 28s by 2970MHz. congrats :toast:


I get 37s at 2190MHz with a K8NHA PRO bios for my shuttle
I had 2 K8NHA PRO and both are dead...

by newbeetle with his Biostar :

http://219.113.251.125/c-board/file/11x280%3D27S%2BWS.gif

and U with a K8NHA PRo :
http://cal930.hp.infoseek.co.jp/28s.jpg

[GAMER512]

Here's my A64 @ 2.56GHz with 1.7v on AIR @ 39c. I need to rebench because I'm on water now and as soon as I get my 226W TEC I'll see what I can get out of it.

[Nyge]

Originally posted by GAMER512
Here's my A64 @ 2.56GHz with 1.7v on AIR @ 39c. I need to rebench because I'm on water now and as soon as I get my 226W TEC I'll see what I can get out of it.
That's nice clocks on air. Can you tell me the stepping of the cpu? I'm looking for a new oc-beast (again), to put under phase-channge. That would be my third A64. :)

[fxr91]

Max clock (unbenchable)
http://users.bigpond.net.au/fxr91/bench/maxclock.jpg
Vapo LS (unmodded), AN50-R (vmodded), vdimm @3.6, vcore 1.95
This is using OCZ PC3500EB 256MB (2.5-4-4-8)

Max 1:1 is 270HTT (unstable) :)

Going to be doing more testing later to see just where I can get to :)

[Primal]

I heard that A64 3200+ CG are the best overclockers...
Is that true? :stick: if so, what is the full stepping of these CPU's?
Another question: what is the differnce between a 3200+ CG and a 3200+ C0?

and what is a DTR chip?

thanks.

[fxr91]

A DTR is a "DeskTop Replacement" chip. It is an A64 with the IHS removed, meaning you have to do some modifying of your cooling solution to touch the core as it sits lower than the IHS.

From what I know, the only real difference between the C0 and the CG stepping of cpu's is that the memory compatability was improved with the CG.

[Primal]

Originally posted by fxr91
From what I know, the only real difference between the C0 and the CG stepping of cpu's is that the memory compatability was improved with the CG.

Great, thanks!
I heard also that there is A difference between the chache (512Kb/1Mb) and the multi (11x/10x), is that true?
Oh, and what about overclocking capabilities?
(This is for personal knowledge only, im very satisfied with my chip ;)).

[Tom Holck]

Still tweaking.

Stabil at 3340-3360 now.

Schreenshot::D

[s e t h]

sweet stuff dudes.

macci's benching live if anyone is interested.
http://www.muropaketti.com/webcam/
there is a thread in the 3d forum and at planetmars

[boshi]

I got an A64 3400+
it never even got hot to 225 FSB when the mobo crapped out.

[Bennah]

Originally posted by Tom Holck
Still tweaking.

Stabil at 3340-3360 now.

Schreenshot::D

:toast:

I see you are still overclocking them FX's :slobber:

[K32A]

Originally posted by Tom Holck
Still tweaking.

Stabil at 3340-3360 now.

Schreenshot::D

:slobber: That is great Tom! I'm seeing foward to see some benches, when you get your X800Pro/XT :banana:

[EmineM]

CPULL
where are the mods for the biostar?

[McAnus]

damn nice all of you!

[GAMER512]

Originally posted by Nyge
That's nice clocks on air. Can you tell me the stepping of the cpu? I'm looking for a new oc-beast (again), to put under phase-channge. That would be my third A64. :)
Yeah my stepping is CAAOC 0352 XPMW and I've had another 3000+ with the same stepping that did 2.55GHz with 1.7v on AIR.

[SKYNET]

water cooled
http://downhill666.bei.t-online.de/Rechner/Sandra_2700_big.gif

[Primal]

If I got an option to choose single 3200+, which one should i go for to give the best clocks?

CG ClawHammer
CG NewCastel
C0 ClawHammer
C0 NewCastel

Again, i want this best clocker!
(tell me the week also)

[SmokeyTheBandit]

Originally posted by Primal
If I got an option to choose single 3200+, which one should i go for to give the best clocks?

CG ClawHammer
CG NewCastel
C0 ClawHammer
C0 NewCastel

Again, i want this best clocker!
(tell me the week also)

I would choose for this one :

CG NewCastle

Am looking for one myself, because it has got the real juicy MP 11 :banana: :toast:
It also got improved memory compatebility wich is very nice when it comes to BH-5 in 512 MB sticks !!!
It also preforms a bit better at default than its clawhammer 1 MB brother.

When it comes to week dates always choose the most recent !!

[Primal]

Great man, thanks for the help! :banana:
Should I go for green or brown chip?
you know what is the full stepping of NewCastle CG?
Oh, and what about overclocking capabilities compared to ClawHammers C0/CG?

thanks :toast:

[SmokeyTheBandit]

Originally posted by Primal
Great man, thanks for the help! :banana:
Should I go for green or brown chip?
you know what is the full stepping of NewCastle CG?
Oh, and what about overclocking capabilities compared to ClawHammers C0/CG?

thanks :toast:

The color doenst realy matter.

You can recognice a typical core as stated below :

Athlon64 3400+ 2200MHz 1MB ADA3400AEP5AR (CG)
Athlon64 3400+ 2200MHz 1MB ADA3400AEP5AP (C0)
Athlon64 3200+ 2200MHz 512KB ADA3200AEP4AX (CG)
Athlon64 3200+ 2000MHz 1MB ADA3200AEP5AR (CG)
Athlon64 3200+ 2000MHz 1MB ADA3200AEP5AP (C0)
Athlon64 3000+ 2000MHz 512KB ADA3000AEP4AX (CG)
Athlon64 3000+ 2000MHz 512KB ADA3000AEP4AR (CG)
Athlon64 3000+ 2000MHz 512KB ADA3000AEP4AP (C0)
Athlon64 2800+ 1800MHz 512KB ADA2800AEP4AX (CG

[Primal]

Any CPU that is NewCastle core must be CG right?
But there are CG's that are ClawHammer right?

[SmokeyTheBandit]

Originally posted by Primal
Any CPU that is NewCastle core must be CG right?
But there are CG's that are ClawHammer right?

Yep thats true the 3000+ CG is easy to recognice but with the 3200+ you must look for the 2.2 Ghz (512 Kb Cache) version.

[Primal]

If i'll find this version OCing is guaranteed no matter the week, batch etc. (Sure i'll try to find the newest week, and best batch)?

Again, you sure PCB color doesn't matter?

[pkrew]

Originally posted by SmokeyTheBandit

It also preforms a bit better at default than its clawhammer 1 MB brother.



http://www.xtremesystems.org/forums/showthread.php?s=&threadid=35186 :stick:

[SmokeyTheBandit]

Originally posted by pkrew
http://www.xtremesystems.org/forums/showthread.php?s=&threadid=35186 :stick:

As you can see in 90 % of the normal daily used appz it is a bit faster.
Sure 3D Mark/Pifast gives a bit higher scores but im more interesed in the encoding of DVDs for example and gaming etc. and i know that in these cases Mhz is more effective than cache.
The change of getting higher clocks with the Newcastle 3200+ is much bigger.

Ill bet a 2800Mhz Clawhammer is slower than an 3000 Mhz Newcastle ;)

But this is something we have to encounter ourselfs in the next few weeks.

I hope i get my 3200+ newcastle tommorrow together with my brand new and modded EPoX 8KDA3+ :D:D

[pkrew]

Interesting, I didn't see any compairisons for encoding. If you have a link for that it would be great. I would also think that most games would follow 2001se, which clock for clock you lose 700 points and it takes the extra 200mhz to draw almost even. from what I've seen you'd have to overclock to around 200mhz higher with the NC. Meaning your 2.85 NC would be on par with a 2.65-2.7 CL. If you have some encoding test and stuff it might be interesting to see the difference.

[SmokeyTheBandit]

Originally posted by pkrew
Interesting, I didn't see any compairisons for encoding. If you have a link for that it would be great. I would also think that most games would follow 2001se, which clock for clock you lose 700 points and it takes the extra 200mhz to draw almost even. from what I've seen you'd have to overclock to around 200mhz higher with the NC. Meaning your 2.85 NC would be on par with a 2.65-2.7 CL. If you have some encoding test and stuff it might be interesting to see the difference.

I will look for a couple of screenies with encoding differences.

If you look here at the Pifast link below you see the score of the 3400+ from Z3us and my 3000+

http://www.ministryofoverclocking.net/contests/list.php?klasse=10

Z3us 3400+ @ 2.56
SmokeyTheBandit 3000+ @ 2.81

Well if you see the scores than you will see that it isnt on pair with the Newcastle even though it is a 1 MB around 2.6 Ghz.
:banana:

I think a 1 MB version will improve the scores on the same speeds by 1 / 1.5 Sec.

[Primal]

Well, I kinda want A CPU that's overclocks the best when i'll put it under the prommy.

So, the chosen one is 3200+ NewCastle CG or 3200+ ClawHammer CG? (No way i'm going for C0.. compatibility with 512Mb sticks is critical for me).

Thanks, Roy :toast:

[pkrew]

its a little slow, but you're about right for pfast. Just for fun lets keep going

[Sheik]

Originally posted by Primal
But there are CG's that are ClawHammer right?

Yip

ADA3400AEP5AR
CAAPC 0407SPMW

[Primal]

Anyway, should I got for ClawHammer CG or NewCastle CG?
(I want the best OCer).

[KoGeR|Max]

freaks !!!!!

[SmokeyTheBandit]

Well i ordered an new chip :D:D

Athlon 64 3200+ Newcastle - AX - 0414 - XPMW :banana:

I hope this will finally let me break the 3 ghz stable barrier :D :P

This should go nicly on my new EPoX 8KDA3+ (nForce 3 250 GB).


Will let you guys know what its capable of :)


:toast:

[Primal]

Originally posted by SmokeyTheBandit
Well i ordered an new chip :D:D

Athlon 64 3200+ Newcastle - AX - 0414 - XPMW :banana:

I hope this will finally let me break the 3 ghz stable barrier :D :P

This should go nicly on my new EPoX 8KDA3+ (nForce 3 250 GB).


Will let you guys know what its capable of :)


:toast:

Can't wait for the results, if it's good i'll buy it too :toast:
Anyway, it's that NewCastle with 2.2Ghz & 512k chace?

[SmokeyTheBandit]

Originally posted by Primal
Can't wait for the results, if it's good i'll buy it too :toast:
Anyway, it's that NewCastle with 2.2Ghz & 512k chace?

A very short answer : YES :banana: :toast:

[Primal]

Originally posted by SmokeyTheBandit
A very short answer : YES :banana: :toast:

Cool!
Already saw you updated your sig...

[SmokeyTheBandit]

Originally posted by Primal
Cool!
Already saw you updated your sig...

Yep im looking for vmods for the EPoX 8KDA3+ because i want to put them on before i put this motherboard + cpu under the prom :rolleyes:

[Primal]

Why did you choose the EPoX upon GigaByte, Chaintech and more..?

[SmokeyTheBandit]

Originally posted by Primal
Why did you choose the EPoX upon GigaByte, Chaintech and more..?

Because this is the only one thats available here in holland besides the Chaintech.
The Chaintech 250 preforms the same as his 150 brother , that is unacceptable offcourse (new chipset = beter preformace).

And the EPoX has 6 S-ATA controllers onboard wich i use so thats a must for me.

The other brands have not arrived here and will not arrive in a few weeks if you ask me.

[K32A]

I think that i will order my new Abit KV8 Pro tomorrow :p:

I'm gonna post some results in here when Abit has released the new BIOS ;)

[Primal]

Check this out:
http://www.anandtech.com/chipsets/showdoc.html?i=2063
Great review, I recommend it, very useful for people who wants to buy an A64+2nd mobo's at these days...

By the way, the Epox 8KDA3+ is the winner :banana:
It overclock the best, preforms extremely well and has a great variety of features. thought i'd go for the K8NS, but no... :rotf:
NF3250Gb rocks!

[K32A]

The Epox, oc's just as much as the Abit, 2480MHz... And the Abit has vcore up to 1.8v and vdimm 3.2 in ocguru, so i would pick the Abit, IF they soon release a new bios with agp/pci lock fix.

The MSI K8N Neo plat. looks nice too :) vcore op to 1.81v but only vdimm 2.85v

[bias_hjorth]

looks okay but nothing to change your excisting nf3 150 mobo over IMO :)

[K32A]

Originally posted by bias_hjorth
looks okay but nothing to change your excisting nf3 150 mobo over IMO :)

Well... I will change it with the Abit, but only if I know that there is'nt any problems with the agp/pci lock and multiplier-selection etc. :rolleyes:

[Formann]

Originally posted by K32A
The Epox, oc's just as much as the Abit, 2480MHz... And the Abit has vcore up to 1.8v and vdimm 3.2 in ocguru, so i would pick the Abit, IF they soon release a new bios with agp/pci lock fix.

The MSI K8N Neo plat. looks nice too :) vcore op to 1.81v but only vdimm 2.85v

If you read more carefully, you´ll se Abit have already fixed the agp/pci lock. All shipping boards will have working agp/pci lock.

Im acually going to give the K8V Pro a try tho its Via chipset.

[K32A]

Formann...

oops, my mistake.

But the Abit still have some probs. with the multiplier selection, and it also boots up with x9 multi on x10 cpu's... That what the test says

[andyddr]

Originally posted by bias_hjorth
looks okay but nothing to change your excisting nf3 150 mobo over IMO :)

Agreed. My K8NPRO will do 350 FSB (Raid 0) and that`s good enough for me. Only thing missing is hardware firewall and I could care less.

[K32A]

1.8vcore with water, is that too much?

[Nyge]

Originally posted by K32A
1.8vcore with water, is that too much?
No it ain't. I have had 1.9V for several weeks now.

[K32A]

Thx ;)

[damsxx]

hello :banana:


Does core revsion AX (DH7-CG like 939) on sock 754 have a better overcloking results ?

does it have a probleme with 512 bh5 sticks and core Co ?

thanks

[SmokeyTheBandit]

Originally posted by damsxx
hello :banana:


Does core revsion AX (DH7-CG like 939) on sock 754 have a better overcloking results ?

does it have a probleme with 512 bh5 sticks and core Co ?

thanks

http://home.quicknet.nl/qn/prive/pjm.honselaar/Pifast/pifast43.81.JPG

This is done with 2x 512 MB BH-5 Stix and a 3200+ NC AX Core ;)
So yeah its much better :D

[Primal]

Smokey, after I saw your OCing results I think i'm ready to buy 3200+ NewCastle! :banana: Awesome results man, congrats!

Oh and what's limiting you on the way to the 3Ghz club?
How much Vcore & Vdimm? & Dividers? Thanks...

i'll think i'll get NC 3200+/EP-8KDA3+/OCZ EB/X800Pro next week... :toast:

[SmokeyTheBandit]

Originally posted by Primal
Smokey, after I saw your OCing results I think i'm ready to buy 3200+ NewCastle! :banana: Awesome results man, congrats!

Oh and what's limiting you on the way to the 3Ghz club?
How much Vcore & Vdimm? & Dividers? Thanks...

i'll think i'll get NC 3200+/EP-8KDA3+/OCZ EB/X800Pro next week... :toast:

Heej im figuring out this mobo , its got some bios issues wich have to be solved before i can take full advantage of this awesome motherboard.

An example is that it runs much much more stable with 2x 512 mb dimms in stead of 1 wich is very strange :stick: .
I cannot run 10x 290 + with 1x 512 MB dimm but only with 2.

Another example is the Dimm + Core voltages wich arent very stable with or without the Vcore or VDimm mod.

A new result :D ;)

http://home.quicknet.nl/qn/prive/pjm.honselaar/Pifast/pifast43.58.JPG

Vcore @1.9 V
Vdimm @ 3.32 V

This is done with my brand new Enermax 550 Watt PSU ( 36A @ 12V :toast: :slobber: )

[castrol]

Just got my 3200+ (0411) and a Chaintech nForce3 znf 250
I've got some Corsair pc4000 Xms, MachI and Zalman NB47J for the NB.

Rigth now it is stable at 2600mhz, but anything over that is unstabil.
What can I expect to hit whit a Vmod?

Btw Friday i will get a a64 3200+(caamc o344) anyone knows something about that stepping?

sorry for my english

[bias_hjorth]

caamc is a good old stepping.. I have a similar.. although 2600mhz seems a tad too low.. what vcore etc are ya running?... btw. those xms4000 really kills your performance..

[castrol]

bias_hjorth:

Vcore 1.7 max for my mobo, Vmod should do the work, what you mean when you say that xms4000 will kill my performance?

[bias_hjorth]

high latency and high mhz is not the best combination :)

[Primal]

Originally posted by SmokeyTheBandit
Heej im figuring out this mobo , its got some bios issues wich have to be solved before i can take full advantage of this awesome motherboard.

An example is that it runs much much more stable with 2x 512 mb dimms in stead of 1 wich is very strange :stick: .
I cannot run 10x 290 + with 1x 512 MB dimm but only with 2.

Another example is the Dimm + Core voltages wich arent very stable with or without the Vcore or VDimm mod.

A new result :D

*IMG*

Vcore @1.9 V
Vdimm @ 3.32 V

This is done with my brand new Enermax 550 Watt PSU ( 36A @ 12V :toast: :slobber: )

Well, I don't think these minor probs will prevent me from buying this great board... :D

By the way this week im getting Forton 530W or PC P&C 510 ATX-Deluxe !! :banana: should handle my a64 very well...... :D

[=[PULSAR]=]

Anybody have a 3200+ @ 1.9V being watercooled?

[s e t h]

been there on air with a 0352 3000+

[hrhrhrfoot]

my a64 3000(clawhammer) maxed out at 2354 mhz on stock air, no vmods on a k8n pro. Is this good or bad? It is a CAATC stepping.

[Hotspot]

Hello

My A64 3200+ (CAAMC 0341WPMW) is doing 2338 MHz at 1,68 V which ist the max. voltage my Board provides.

greetz

Hotspot

PS: Runs with watercooling 39°C under load.

[ogica]

yeah! i have an a64 3200 caamc on shuttle an50r with 1,92 vcore it runs stable at 2530mhz ,and the temps are 46-56 cooled by asetek watercooling .i will try a vapo this month :d

[=[PULSAR]=]

WOW!!!!:confused: 46-56C on watercool thats really high, but then again I havent heard great things about those asetek waterblocks, what kind of rad/fan configuration do you have?

[ogica]

i use the large rad with 2x120 fan and ls30 pump but this temps i get when i clock to 2530mhz at 1,92v!!

[bias_hjorth]

are you sure you need 1.92 to reach 2530.. I believe thats a tad below standard for the a64 3000 cpu :)

[=[PULSAR]=]

What kind of 120mm fans are you using? Stealths...lol:confused:

Does your board offer a chipset vmod? I think that is what is holding you back.

[SynGroW]

Originally posted by ogica
i use the large rad with 2x120 fan and ls30 pump but this temps i get when i clock to 2530mhz at 1,92v!!

I think that you should remount your waterblock. I think that bad contact is holding you back

I'm running a watercooled A64 and the stressed temp is 36g with a roomtemp of 30g (watertemp is also 30g)

Full setup: Airplex EVO360 with 2x120mm Papst @ 1500rpm, Swiftech MCW5000-64 (also not a very high-end block)
A64 3200+ 1MB @ 2400MHz 1,8v (normally a hotter chip than yours ;) )

I don't think that my temps will rise that much when I give my chip another 0,2v


Btw, max oc of my cpu:

http://www.voidyourwarranty.nl/images/misc/dag_benchen/46.77rs.JPG
http://www.voidyourwarranty.nl/images/misc/dag_benchen/46.77.JPG

Running @ chilled water of 5g

[ogica]

i will try with an antartica head next week :d
also at 1.968v how cold is your cpu ?

[SynGroW]

Originally posted by ogica
i will try with an antartica head next week :d
also at 1.968v how cold is your cpu ?

At that moment of benching it was about 25 degrees full stressed.

I tested specially for you the temps with more normal watertemps, and after 5 minuts of prime95 (small blocks) my cpu was 43g full stressed. Watertemp at that moment was 27 degrees

I didn't test any longer cause I could actually smell my mosfets burning :eek: (no kidding)

During benching they are cooled by a 120mm fan @ 12v, but when gaming I only cool them with a 80mm @ 5v (no sinks) so they didn't like this test at all :P

screenshots:

http://www.voidyourwarranty.nl/images/misc/cpu_temp_testrs.JPG
http://www.voidyourwarranty.nl/images/misc/cpu_temp_test.JPG

[ogica]

i am still waiting for the vapo xe :d

[K32A]

SynGroW Almost 2.0vcore to get 2400MHz :| Thats insane... Have'nt you tried with 1.7vcore or something like that ?

My A64 3200+ Clawhammer will do 2419Mhz stable with 1.68vcore...

[SynGroW]

Originally posted by K32A
SynGroW Almost 2.0vcore to get 2400MHz :| Thats insane... Have'nt you tried with 1.7vcore or something like that ?

My A64 3200+ Clawhammer will do 2419Mhz stable with 1.68vcore...

LOL, that was only to show what kind of cpu temps I would get @ 2v

My cpu does 2400MHz totaly stable @ 1,75v

My max is at 2600MHz at about 1,9v

[K32A]

Lol - In a minute a thought u've got the bad'est chip in the world :-D

[ogica]

i want to buy another a64 3200 :d
anyone to want to sell ?:p
a better oc than mine :(
2400 at 1,82 (stable)

[jhatfie]

I am back at 2500mhz with my new and freshly modded VNF3-250. However I now need more volts to run 2.5 stable. Using the 5:6 memory divider on my AN50R I did 2.5ghz stable @ 1.74v, now at 1:1 I need 1.79v to do it stable. Is this typical?

[ogica]

i want to buy a good oc chip :d maybe to hit 3gh on vapo xe
a64 :d
who hit 2600 on air or over 2600 on water :d
pls who can help me?
:p

[bias_hjorth]

browse though this thread.. some did.. :) but 3ghz on a XE.. come on...

[afireinside]

A 3ghz 2V A64 is over 210 watts of heat... Can an XE even handle that?

[ogica]

xe can handle 180w.
anyway at least 2700-2800mhz :d i wish a good oc chip :d

[ogica]

my friend has now an a64 3400 wich does 2700 mhz on my asetek water with 1,850 :d i think will rullz :d

[Mr. Freeze]

My results :

http://koti.mbnet.fi/jiipee75/Epox%208KDA3+,SuperPi/Superpi/EpoxSpiM8_5_49.gi

CPU can go higher than that but RAM don´t

[Yorky]

My Result is:
A64 3200+ 2G 1Ml2 OC to 2.4G 1M L2
MB:ABIT KV8MAX3

[Nyge]

Originally posted by Mr. Freeze
My results :

http://koti.mbnet.fi/jiipee75/Epox%208KDA3+,SuperPi/Superpi/EpoxSpiM8_5_49.gi

CPU can go higher than that but RAM don´t

Nice OC. Why don't you use bigger ram divider to see how far cpu goes?
What voltages did you push through those 3700 EB? Strange they don't oc more than that.

[misteroadster]

http://pageperso.aol.fr/misteroadster/32sec+Aircool.JPG
3800+ A8V 2X256 KHX3200
Aircooled Silent boost K8
No mods

[bias_hjorth]

man thats fast taken the overall mem and cpu speed :)

[misteroadster]

i think the real ram frequency was 231X11,5/12 = 221,3 Mhz
3800+ perform as well my FX53 940

[s e t h]

that is really fast for a slow fan air cooler. i should have my 3700+ up to that speed next week also on air. the super-pi comparison should be interesting

[misteroadster]

now i'm testing with gigabyte K8nsnxp 939
Bios F2
Corsair LL 1.2
Mod vio=vddr like K8Npro
stock vcore , silentboost K8 :
http://pageperso.aol.fr/misteroadster/32S2593.JPG

[Mariachi]

Hello guys & gals.
I'm thinking of upgrading my rig (P4C 3G @ 4.5G R507 Prom cooled / P4C800-E / BH5) into S754 A64 based-system.

Well I thought about S754 3200+ / NF3 250 setup, but I don't know which CPU should I take:
3200+ ClawHammer 2G w/1Mb L2 cache, or
3200+ NewCastle 2.2G w/512Kb L2 cache

I saw Karnivore's great review and still, I don't know which CPU should I take - which one will give the best performance? (200 additional Mhz's vs. 1Mb cache) which one will give me the best clocks? (if the winner is ClawHammer it must be CG revision!).

Thanks!

[DazzXP]

Not excellent but my board just won't lock my PCI bus and at 228MHz my RAID array will fail, and 118MHz an't what i call stable either :( so much for getting 2.4GHz :( 2.33Ghz at defualt voltage will have to do. On the plus side this processor runs real cool :)

[aoc007]

Originally posted by Mariachi
Hello guys & gals.
I'm thinking of upgrading my rig (P4C 3G @ 4.5G R507 Prom cooled / P4C800-E / BH5) into S754 A64 based-system.

Well I thought about S754 3200+ / NF3 250 setup, but I don't know which CPU should I take:
3200+ ClawHammer 2G w/1Mb L2 cache, or
3200+ NewCastle 2.2G w/512Kb L2 cache

I saw Karnivore's great review and still, I don't know which CPU should I take - which one will give the best performance? (200 additional Mhz's vs. 1Mb cache) which one will give me the best clocks? (if the winner is ClawHammer it must be CG revision!).

Thanks!

You have a 4.5Ghz P4 and your looking to get something else?? Well if I was you Id go for S939 K8T800 Pro is real good but NF3-250GB looks like it might be better, I guess well just see which ocs better.

[Mariachi]

Originally posted by aoc007
You have a 4.5Ghz P4 and your looking to get something else?? Well if I was you Id go for S939 K8T800 Pro is real good but NF3-250GB looks like it might be better, I guess well just see which ocs better.

Well I wanna get another rig, the P4 rig will go for my brother. (Ill ran it default and the Mach goes for me ;))
As I said, im interested in a S754 system. S939 is just too much expensive. With my MachII I can go really far with a good CPU, RAM and mobo.

So what do you say, ClawHammer or NewCastle?

EDIT: Typo :eek:

[K32A]

If you just wanna have a nice overclock, then go for a Newcastle... It's ALMOST garantied for a nice OC ;) (Correct e if im wrong!)

But the Clawhammers are'nt bad at all..

[wimpie007]

Get a clawhammer, the extra cache helps quite a lot!

[Mariachi]

Originally posted by K32A
If you just wanna have a nice overclock, then go for a Newcastle... It's ALMOST garantied for a nice OC ;) (Correct e if im wrong!)

But the Clawhammers are'nt bad at all..

Every NewCastle i'v seen went high speed easily, so these CPU's are pretty much OC guaranteed... :) compared to the ClawHammer, when I can fall on a bad chip easily, but only if I get C0 rev. or something... if i'll get CG rev. i'll be able to OC it pretty far, right? if so, can you recommend me a good stepping? including weeks? :)

Thanks.

[misteroadster]

i remember A64 3800+ Gigabyte K8NSNXP 939 NForce3
Corsair 3200 LL 1.2 VDDR=VIO 3,34v
http://pageperso.aol.fr/misteroadster/7462.JPG
http://pageperso.aol.fr/misteroadster/29s2875.JPG

:D

[Mariachi]

Can some one please answer my question? it's URGENT!

[bias_hjorth]

Originally posted by Mariachi
Can some one please answer my question? it's URGENT!

start a new thread about it insted of using this one..

[s e t h]

Originally posted by Mariachi
Can some one please answer my question? it's URGENT!

well the latest silicone present in the 3700+ i have shows real potential. i'm hitting almost 2.7ghz on air. and yes it is the cg core.

[misteroadster]

http://pageperso.aol.fr/misteroadster/Max3800nomod.JPG
I need Vcore mod.

[Mariachi]

Originally posted by flytek
well the latest silicone present in the 3700+ i have shows real potential. i'm hitting almost 2.7ghz on air. and yes it is the cg core.

CG rev. but ClawHammer right?
Which stepping+week? maybe I can find one for my upcoming 3200+ :stick:

[=[PULSAR]=]

Whats the highest aircooled A64 here?

[charlie]

Here's on DI

[charlie]

Originally posted by =[PULSAR]=
Whats the highest aircooled A64 here?

It'll post a screenie around 2800.......

[misteroadster]

http://pageperso.aol.fr/misteroadster/7735.JPG

[ogica]

Asus A8V DLX lock pci/agp ?

[blinky]

Originally posted by ogica
Asus A8V DLX lock pci/agp ? most do

[ogica]

how came ?most do ?
how do i know if will lock agp/pci? there are more revision ?

[andyOCZ]

I heard that the A8V has not been officially released by ASUS USA due to an "issue" with the boards. Seems many of the early ones are being imported directly form europe or Asia and do not have a working PCI lock. I am waiting, and will probably go NF3.

[Dimdirol]

A64 3000+ BOX
http://images.people.overclockers.ru/7403.png

http://images.people.overclockers.ru/7404.png
On air, but tempereture is very high - 75C. No Vmods.
I'm making a w/c system to cool it :)
Memory works at 2.5v. 2.5v or 2.9v - no difference for it.

[=[PULSAR]=]

Wow really nice OC Dimdirol, really high temps though you have a 2 in 1 machine computer/broiler:D cook some eggs for breakfeast while you read your daily morning news. Which air cooler are you running stock?

[Dimdirol]

=[PULSAR]= yes, stock cooler.
2 All
What is "LDT" I wonder? Is it a kind of multiplier for HT bus? With LDT 3x I can run CPU only @ 2500, but with LDT 2,5x I can jump a bit higher - 2550mhz

[=[PULSAR]=]

Yes, LDT is the multiplier for the HT bus. Can you lower it past 2.5 at all, lower it some more and try for a higher OC. =0)

[Mariachi]

Hello.

I need awesome OC'ing steppings for A64 3200+ S754 ClawHammer CG CPU. I wanna get the best of both worlds - Great OC'ing capability of the CG's, and great performance of the 1Mb cache of the ClawHammers (I prefer that on the 2.2Ghz speed of the NewCastles), means I should get ClawHammer CG CPU. Please write the full stepping and the week. Must clock extremely-well and have to be CG rev.

Regards,
Roy

[=[PULSAR]=]

Jeeze with these newcastles rolling out they are really a great overclocking chip, I just wish I could find newcastle core on a mobile chip. Low wattage output and a better overclocking core this would be the chip to get. After seeing this 3000+ do 2550 on stock air and 1.68 vcore. I cant even imagine one with high end cooling and a board with high vcore maybe paired with the new Abit that has a agp/pci lock and 1.85 vcore. Just a little bit more money until I am able to experiment. Only $69 to go until I'm happy.

[Mariachi]

You mean mobiles/DTR or NewCastle?
Anyway I ordered a 3200+ CH CG without a specific stepping, I just know the CG's are awesome OCers and the 1mb cache adds alot to the performance - so I get the best of both worlds.

[shimmishim]

so it appears these CG newcastles are really good overclockers.

i haven't been keeping up with this thread since about april, but what is the best skt 754 board at the moment?

still the shuttle an50r?

[=[PULSAR]=]

Personally I think its Abit's new KV8 Pro. Supposibly it has a workin agp/pci lock and vcore up to 1.85. I'm ordering the board soon to give it a try.

[s e t h]

all air 3700+

[LBJGH]

A64 3100+ @ 2.2ghz (9x244) - ADA3100AEP5AJ, AAAHC0321RPAW
Epox 8KDA3+
Thermalright SLK948u

[K32A]

Originally posted by LBJGH
A64 3100+ @ 2.2ghz (9x244) - ADA3100AEP5AJ, AAAHC0321RPAW
Epox 8KDA3+
Thermalright SLK948u

3100+ ??:confused:

[nutcase]

since I have not seen anything on the Abit AV8 Mobo, Thought I would Post what I have been able to do right now...

This Board needs a Vdimm Mod.. 2.8V just don't cut it :rolleyes:

Ignore the Bottom Pifast score.. That is me Playing with The_Lab Pifast which uses Pifast43. was seeing the difference between the 2 Pifast's...

[krojczy]

Hey boys, i have one question. Where did you bought yours a64 at CG steeping. Pleas give my some links to online stores.

[kakaroto]

Originally posted by K32A
3100+ ??:confused:

That might be a first AMD sample. If you see the date (0321)... thats one of the first ones.

[kakaroto]

Does anyone have a 3400+ Newcastle 2400MHz CPU and tested??

Mine is coming soon this or next week: :banana:

ADA3400AEP4AX
CBASC 0413SPMW
9545642D40169

[=[PULSAR]=]

Okay well I got my Abit KV8 Pro today and got everything hooked up suprisingly it did have a working lock on it. I'm testing it with a 3000+ Clawhammer. Its nice to have 1.85 vcore but I need a nicer heatsink all I got for now is stock. At bios idle with 1.85 it reads 71C. I'll post overclocking results later.

[=[PULSAR]=]

Well I think a KV8 Pro is a great board with all the options. I think the bottleneck in my overclocking attempt is the processor. My max benchable OC was 2.4Ghz @ 1.7V. The stock CPU heatsink isnt helping niether is the passive chipset heatsink it was getting really hot during benchmarks. I will post again when I get my 3000+ NewCastle and Thermaltake Tower112.

[misteroadster]

Gigabyte K8NSNXP 939 :
http://pageperso.aol.fr/misteroadster/3800Max.JPG

[shimmishim]

sweet mother...

i can't get higher than 2.6 :( on my skt 754 3200+ newcastle...

all i ask for is 2.8... is that too much? :(

[spellsfromhell]

280x10 @ 1.7vcore, boots into windows but not prime stable

http://img16.exs.cx/img16/3811/2800-jpg.jpg

http://img16.exs.cx/img16/432/chippy.jpg

[Mariachi]

That's a really new chip... Congrats. Temps?