Dafut
11-01-2008, 07:36 AM
This is my first post here so hi guys :). I'm reading on XS for a few years now but never posted anything.
This is my first result (i think is) worth posting:
Setup:
E8600, cooled by SS phase change unit build by Little Devil
Asus Commando (Vcore + Vdroop modded)
2x1GB Crucial Ballistix
HD3850
Pics of the setup:
http://img.webrail.eu/Dafut/PC_Setup_k.jpg (http://img.webrail.eu/Dafut/PC_Setup.jpg)
http://img.webrail.eu/Dafut/PC_Setup2_k.jpg (http://img.webrail.eu/Dafut/PC_Setup2.jpg)
The results:
At first I coudn't run higher than 5600MHz, so I opened a couple of windows so the temperature would be a little lower (outside temperature was ~8 degrees celsius) and that worked. Now i was able to run at 5662MHz:
http://img.webrail.eu/Dafut/E8600_Commando_SPI_k.jpg (http://img.webrail.eu/Dafut/E8600_Commando_SPI.jpg)
1M: 7.985 sec (eff=45212)
Then I tried running 5687MHz but that crashed at loop 13. So I rebooted the system and prepared everything for an other run. Afther waiting 15/20 minutes for the temperature to go down I started SPI and it passed :D:
http://img.webrail.eu/Dafut/E8600_Commando_SPI2_k.jpg (http://img.webrail.eu/Dafut/E8600_Commando_SPI2.jpg)
1M: 7.953 sec (eff=45233)
My E8600 isn't a very good one as i needed 1,85V to run at this speeds but I'm happy with the results. The real temperature of the CPU I don't know but I think it was around -35 (The unit was saying -52 but that's not the real temp). Next step will be cascade cooling and an other motherboard as this one won't go over 610FSB.
This is my first result (i think is) worth posting:
Setup:
E8600, cooled by SS phase change unit build by Little Devil
Asus Commando (Vcore + Vdroop modded)
2x1GB Crucial Ballistix
HD3850
Pics of the setup:
http://img.webrail.eu/Dafut/PC_Setup_k.jpg (http://img.webrail.eu/Dafut/PC_Setup.jpg)
http://img.webrail.eu/Dafut/PC_Setup2_k.jpg (http://img.webrail.eu/Dafut/PC_Setup2.jpg)
The results:
At first I coudn't run higher than 5600MHz, so I opened a couple of windows so the temperature would be a little lower (outside temperature was ~8 degrees celsius) and that worked. Now i was able to run at 5662MHz:
http://img.webrail.eu/Dafut/E8600_Commando_SPI_k.jpg (http://img.webrail.eu/Dafut/E8600_Commando_SPI.jpg)
1M: 7.985 sec (eff=45212)
Then I tried running 5687MHz but that crashed at loop 13. So I rebooted the system and prepared everything for an other run. Afther waiting 15/20 minutes for the temperature to go down I started SPI and it passed :D:
http://img.webrail.eu/Dafut/E8600_Commando_SPI2_k.jpg (http://img.webrail.eu/Dafut/E8600_Commando_SPI2.jpg)
1M: 7.953 sec (eff=45233)
My E8600 isn't a very good one as i needed 1,85V to run at this speeds but I'm happy with the results. The real temperature of the CPU I don't know but I think it was around -35 (The unit was saying -52 but that's not the real temp). Next step will be cascade cooling and an other motherboard as this one won't go over 610FSB.