View Full Version : p5k-se/epu vmods?
Boogerlad
10-23-2008, 03:52 PM
Hello everyone. Does anyone know where the measuring points for vDimm, vNb and vcore is? Also, if you have any idea, then please post away. Also, i might be able to provide some pictures of certain areas, but i'm not sure. I heard that this board is limited by vNb. Would a vDroop mod be necassary? I heard from FCG that vdroop might actually be good. http://thetechrepository.com/showthread.php?t=126&highlight=vdroop The placement of the inductors, mosfets and capacitors is pretty stupid though. How are you going to achieve any cooling on those without the puny ramsinks? Pencil mods please if possible
Thanks XS!
Boogerlad
10-25-2008, 08:07 AM
No one knows any vmod?
bartx
10-25-2008, 11:59 AM
http://img410.imageshack.us/img410/7282/p5kseepurk4.jpg
Please, write marks of this chips. Upper is probably responsible for vcore, second one for vdimm. I have no idea about vnb and measurements points.
Boogerlad
10-25-2008, 03:14 PM
ok. I might not be right, but i did my best with my trusty flashlight! pictures from my digicam will come soon once batteries are done charging. EDIT: nvm, i can't get closer macro pictures cause my digicam just sucks.
shumway
10-26-2008, 12:51 AM
Thank god i'm not the only one looking for a mod on this board :p:
I have a macro shot of the epu from another site but it's probably not going to be any help with out the data sheet and i haven't seen 1 any where on the net yet :shrug:
Boogerlad
11-03-2008, 07:26 AM
does anyone know? help please.
tj_jackson
11-28-2008, 06:36 AM
look :clap:
http://www.adrenaline.com.br/forum/showpost.php?p=169058
http://www.adrenaline.com.br/forum/showpost.php?p=3962378&postcount=131
shumway
11-30-2008, 01:46 AM
look :clap:
http://www.adrenaline.com.br/forum/showpost.php?p=169058
http://www.adrenaline.com.br/forum/showpost.php?p=3962378&postcount=131
The se mod dosen't work on the se/epu :mad:
does anyone know?
http://e.imagehost.org/0717/p5k_se_epu.jpg
Boogerlad
12-18-2008, 02:03 PM
how do you get nice pics like that?
Damian^
12-22-2008, 08:08 PM
You're in luck
http://forums.overclockersclub.com/?showtopic=159712
phillip2232bw
12-22-2008, 08:48 PM
wowwww , i can't believe
tomorrow i'll do that ...
Boogerlad
12-22-2008, 08:57 PM
Thanks! Just wish my darn e1200 didn't have a fsb wall at 204fsb.
phillip2232bw
12-23-2008, 06:59 AM
i'm very afraid !!
someone already made ?
shumway
12-25-2008, 11:24 AM
Thanks Damian^
It's about time some one came up with some thing for this board :D
Now hopefully i can get this E2200 up around the 3.5ghz range :ROTF:
yankee
12-25-2008, 10:44 PM
This is the same board I have, minus EPU.
I'm maxing out around 510 fsb for benching with upgraded nb cooling, an NB vCore mod would bee nice. I can give macro shots too for closer analysis.
rig in sig. hwbot nick is same.
itslogz
01-14-2009, 10:44 PM
Just for reference, i believe this is the same as the P5K-E Wifi, i did a little pencil vdroop mod on mine when I had it, heres my results I posted in this thread I made.
http://www.overclock.net/motherboard-volt-mods/257086-my-results-asus-p5k-e-pencil.html
Just incase this guys still iterested and hasnt done it yet or anything like that. GL.