What are your temps with your E8X00 under water ?

[CandymanCan]

I just hooked up my new system and my new modded block is working fine from what i can tell saved me from using the stock HSF at least until i can buy a real block. "You can see my thread in the other section"

So what are your temps under water Idle and Load for your 8200-8600's ? Please post Overclocks and voltage from those temps. I just want to get some comparisons to see how bad or how good my block is doing,

Right now im at 4300mhz 1.325v 333 strap and my temps are 49c load and 30c idle. The block probly isnt cutting lol but i know its better then alternative using the stock HSF ..

[sirheck]

Mine is about the same but load temps are a little lower=mid forties
according to real temp and when the dts arent sticking.

It is currently at 3.6ghz with stock volts.
Had it at 4ghz and the load temps were about the same as yours.IIRC.

The loop has a mcr220 and the NB is in it as well.

Load temps were from 27/4 F@H SMP client.
Got a 10.9 in super pi 1m with it at 4.3ghz, but i just leave it
at 3.6 most of the time anymore.

[sirheck]

DOH! forgot its the E8400.

[CandymanCan]

So at 4ghz with what voltage, or are you talking about 4.3ghz ? I need to know the voltages at the speeds so i can get a better idea if this Maze 3 i modded (yea maze3 lol) is doing ok or not. 4300mhz at 1.3v wasnt stable im at 1.33v now running orthos and the temps are 54c now well 54 on the high core i seem to have one core like 4c cooler then the other.

If i got what you said right then you were at 4ghz with 1.2v which is stock voltage and your temps were like 45c? If thats true then i guess this block is working cuss if i was at 4300mhz with 1.3v at getting 49c then i guess yea

[sirheck]

Its 3.6 with stock volts right now.
I cant remember what voltage i had for 4ghz or 4.3.
But i think i can find them.

Ok for 4ghz cpu-z reports 1.29vlts
I had 4.3ghz and 1.4vlts:eek:

[CandymanCan]

What this with core temp or real temp btw ?

[LagunaX]

Dude it seems sufficient.
I'm on air with a Thermalright Ultra 120 Extreme 4.5ghz @ 1.3v.
31c idle both cores. 65c highest during orthos load both cores.
http://www.xtremesystems.org/forums/showthread.php?t=203762
You're not even breaking 60c.

[firebane]

e8600 @ 1.4v @ 4.6ghz with temps idling around 35 celsius and under load about 64 cesius.

[sirheck]

What this with core temp or real temp btw ?

Both are popular temp monitoring software.

[CandymanCan]

I know but there is no need think that freaking or out or anything because well i am, you have to understand im using this waterblock im the only one in the world probly using a 7 year old waterblock on a Wolfdale and radiator and pump that was ment to only cool Athlon XP's they are about 6-7 years old now also lol. So thats why i made the thread to see where you guys are at to compare how well its really doing

See my worklog on how i modded this block to fit on S775 lol.

http://www.xtremesystems.org/Forums/showthread.php?t=203741

[LagunaX]

Look at XS member Zeus' overclock and temps on water:
http://www.xtremesystems.org/forums/showpost.php?p=3338041&postcount=212
http://img.photobucket.com/albums/v620/Z3us/screenshots/3hrsPrime45.jpg

[CandymanCan]

So i guess im normal, and i saved myself $50 by reusing a 7 year old waterblock HAHHAHAA "Snicker"

http://img510.imageshack.us/img510/2899/tttttttttttttttoa4.th.jpg (http://img510.imageshack.us/my.php?image=tttttttttttttttoa4.jpg)http://img510.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)

[Vertigo1]

E8400 @ 3.8Ghz on 1.29v
Water temp of around 30C
Idles at around 37C
Load at around 49-50C
D-Tek Fuzion V1

[HaCKs]

http://i36.tinypic.com/347wuiq.jpg

[Blazing fire]

Good temps. What pump, radiator, fan, CPU block and other stuff in the loop? Don't forget to include coolant as they make lots of difference in temps.

[CandymanCan]

Are you talking to me or him ? Hacks those temps cant be at load using a prime95 or orthos are they ?

My setup is a

Maze 3 I modded lol
Eheim 1048 pump
Black Ice extreme radiator.
With tap water

All parts 6 years old ment for athlon xp's lol and my temps are near the same as some the watercooling setup's iv seen here actually cooler then a few which is suprising.

4300mhz at 1.33v around 50c

http://img.photobucket.com/albums/v466/Candymancan/4300mhz.jpg

[HaCKs]

Sorry for not clarifying. No those are idle temps, I use a black ice extreme 360MM rad with six yate loons, a danger den MC-TDX and a DDC+ XSPC top. Using feser one blue coolant.

[WaterFlex]

HaCKs
Very nice temps ;)

[CandymanCan]

There idle temps he said lol i can get that idle also lol

[LagunaX]

For a C0 chip that is a great result.

[CandymanCan]

Yea and Aprently this memory Oc's to DDR1000 so i guess i freaked out over nothing on that other ram

[Blazing fire]

That's sad. I thought it was 32C on load...

[CandymanCan]

lol the 32c for max is probly when his cpu went to 50% usage from clicking on IE

[Quad-Damage]

Wow I guess my system is not 1/2 bad

http://i35.tinypic.com/1zptkly.jpg
I have seen it as low as 24c but it's around 26 to 29c idle and i have never seen it over 49c even after priming for hours

It's a GTZ on a 3x rad silent ran with 3x E fan, very low noise and a D6555 with a

[CandymanCan]

Yea pretty good but how may i ask are you min and max temps almost near the same, but speedfan is reporting the temps 16c higher are you temps stuck on real temp ? Cuss thats a huge differential in temps there. Your min reports 33c and your max reports 35c that doesnt make any sense i think your temps are stuck

, i think mine is great tho considering its a maze 3 block for Athlon xp's lol

[Quad-Damage]

speed fan is a pos app, it can't read the core 2 duo correctly

It's the same in core temp (and real temps) i don't know why they are so far apart

[JohnnyV]

Candyman... sorry for possibly bursting a bubble here but you need to add 5 degrees to your temps. You still have the Tjmax set at 95c instead of 100c which is the correct value for 45nm cpu's.

You can increase the Tjmax in realtemp.

Still, temps are not bad.

[Zeus]

I can't be bothered by high temps, they just mean next to nothing to me, the sensors are so damn borked on these cpu's.

According to the sensors mine idles at 39ºC and there was a pic of my OC in this thread, high fifty's load with just 1.296V -- watercooled that is! Watertemp is 25ºC.

To make matters even more odd, low VID chips run much, i mean much hotter than high VID chips. :shrug:

As long as i'm stable and below 80ºC i wouldn't worry.

How reliable is 24ºC idle in a 21ºC ambient?
It sure looks nice but it's as trustable as Sadam Hussain imho.

[JohnnyV]

My temps go up to 60c load when priming small FFT with 1,33v which is way higher than my Q9450 would reach at 1,38v. This still surprises me.
I'm planning on lapping the cpu and removing the quad core chamber but I would be disappointed if the temps stayed this high after lapping the cpu.

[Zeus]

Check the flatness of your ihs with an exacto knife, if it's flat don't lap it.

I suspect contact between the cores and ihs is pretty bad but taking of the heatspreader is something i'd rather avoid.

i'd hate to ruin a nice chip for the sake of better temps.

[D-Cyph3r]

E8600 400x10 1.27v (real)
Idle - 25-27*C
Load 42-44*C

EK Supreme
Laing DDC Ultra w/XSPC Reservoir Top
PA120.3 w/ Xilence Redwings
PrimoChill PC Pure Coolant/XSPC 7/16" Tubing


Yeah it's overkill for a dualie.:p:

[Quad-Damage]

The lower temps the happier I am :)

[Zeus]

The lower temps the happier I am :)

I used to be like that myself but i haven't seen a cool cpu since i left the AMD camp.

The older i grow, the more i tink of temps like my age, just a number without meaning. :D

My CPU reaches almost 60ºC running Prime small fft's but it's still rock stable, what's there to worry?

Come to think of it, the water is just 25ºC, i estimate my fuZion cpu block will be no hotter than ~28ºC maybe, how can my cpu that is held tight against a 28ºC block suddenly reach twice that temp?

That just doesn't make sense to me.

[CandymanCan]

People have always been suspecting that the IHS on these cpu's that have these core temp variations are uneven or not making contact right ect, your all wrong. A64's have been doing this since there duel core's along time ago, we lapped we removed the IHS's nothing worked trust me dont even bother doing it.

[Blazing fire]

E8600 400x10 1.27v (real)
Idle - 25-27*C
Load 42-44*C

EK Supreme
Laing DDC Ultra w/XSPC Reservoir Top
PA120.3 w/ Xilence Redwings
PrimoChill PC Pure Coolant/XSPC 7/16" Tubing


Yeah it's overkill for a dualie.:p:

I presume it's single loop? Otherwise, it's not really overkill :)

[lyl]

heres a taste of my load temps

realtemp's max temps are from benching earlier

my vcore=1.36 in bios...