New Bitspower toys

[RADCOM]

This could save some wiring headaches also in Green
Bitspower X-Station 2 Power Extension Block - UV Blue

A new highlight from Bitspower!

This power distributor can adapt 1-2 normal 4-Pin Molex connectors to many different connectors. They are supplied with different voltages, e.g. the fan and LED connectors are supplied with 5V, 7V and 12V, of each there are 4 connectors. Additionally the Molex plugs are multiplied as well, from the 1-2 needed to power the station to 8 sockets that can be used to power multiple devices in the system. Additionally 2x4Pin PWM connectors for special fans are implemented on the board.

One of the best features of this product is the modding potential! Each Molex connector is lit by a LED which also lights the Plexi-plate on the back of the board. Additional LEDs on the front light the whole board. The item is shipped with self-adhesive velcro to allow installation anywhere in the case.

For anyone wishing to make their PC absolutely unique there is no way around this!

Technical details:
Dimension: 136x63x20mm
Input power: 2x 4Pin Molex
Outputs:
8x 4 Pin Molex connector
4x 3 Pin 5V
4x 3 Pin 7V
4x 3 Pin 12V
2x 4 Pin PWM
2x LEDs on the front
1x integrated LED per Molex connector
Backside: Plexi plate

Extent of delivery:
1x X-Station power extension II for LEDs & fans (blue version)
2x 4 Pin Molex extension approx. 30cm
2x Self-adhesive velcro pads

[pcaddict]

That would be nice :up:

[Anemone]

Good design but the output molex's are the wrong gender for the usual component connections. So be sure you obtain or build some gender reversing adapters.