Why !

[Privateer]

To type this ive uninstalled folding,it crashes,then restarts and ive lost my work.
Also for example.
SOMETIMES.
A P145 Takes 2 hrs and others over 12,(WHY!!!)THIS Pi**ed me of after 8hrs and 75% done it crashed,my score would be a lot better, im losing loads.
As now ill have to reinstall.

[DDTUNG]

You shouldn't lose your work after the crash. After the restart it resumes from the last completed frame. Which version of F@H are you using?

DDTUNG:cool:

[Hardass]

DDTUNG is correct you do not lose completed WU,s. Go to this site and see if anyone else has or is having the same problem you are, I have not heard of F@H crashing before. Good luck in your search! Link (http://forum.folding-community.org/)

[Privateer]

Originally posted by Hardass
DDTUNG is correct you do not lose completed WU,s. Go to this site and see if anyone else has or is having the same problem you are, I have not heard of F@H crashing before. Good luck in your search! Link (http://forum.folding-community.org/)

i dont mean completed but to lose a 75% done fold is gutting,im using 3.1.

Here a classic example.
Ive got 2 pc running,i started folding at the same time.
1 P/c has done 1 full and is on 27% of the second fold,in the meantime my other pc has managed a measly 15% and my 15% P/C is 1800MHz the other is 1660MHz.

[Hardass]

When you do a Reinstall, delete the existing F@H program using Add/Remove Programs. Go into programs and delete F@H folder that is left behind. For some reason Add/Remove does not delete entire folder.

[Privateer]

Originally posted by Hardass
When you do a Reinstall, delete the existing F@H program using Add/Remove Programs. Go into programs and delete F@H folder that is left behind. For some reason Add/Remove does not delete entire folder.

This sucks.
On my 2nd WU at 27% it locked up on reboot i lost all,so it got to 15% and its locked up.ive got nothing else to do so ill format.

[Privateer]

The pc that was on 15% is now on 43% thats thats a wopping 28% in4.5 hrs that cant be right or is it some do take days.

[Privateer]

On a fresh install so far after 10 mins 1% hasnt come up so its slow,i dont mind folding 24/7 for results but im going backwards now,ill spit my dummy and give up i cant afford no results.

[Hardass]

I have never had a protein take days, and I have rigs only running 1200MHz. There is a conflict in that rig.

[MrBill]

There are several different Work Units and each take a different amount of time to process and therefore have a different point value.

There are also 2 differnt P145's. One processes quickly while the other may take 15-16 hours even on a FAST computer.

If you will copy and paste your FAHlog.txt file here we can better determine what is happening.

[Privateer]

Originally posted by Hardass
I have never had a protein take days, and I have rigs only running 1200MHz. There is a conflict in that rig.

Im getting s**t results on both pc 1 is loaded with xp and ive even tried win 98,ive tried loads of options its just gone slow,after 8 hrs and 30% and this is probably the 10th install i have given up.im no longer folding sorry.Im getting different pc soon P4.do u have any sugestions on a 850E mobo.

[Privateer]

:D

[Privateer]

Done.

[Hardass]

Hang in there Bro, want to wait for MrBill to take a look at this. He knows more about the Folding program then I do.

[DDTUNG]

Your log file looks ok. It does take 7-11 minutes to finish a frame of this protein(5000000 dynamic steps) which translates into 10-18 hours per WU. One suggestion is to run the console version of F@H which is slightly faster.

Hang in there.

DDTUNG:cool:

[MrBill]

Originally posted by DDTUNG
Your log file looks ok. It does take 7-11 minutes to finish a frame of this protein(5000000 dynamic steps) which translates into 10-18 hours per WU. One suggestion is to run the console version of F@H which is slightly faster.

Hang in there.

DDTUNG:cool: Agreed. I would like to see more "finished a frame" lines to see actual times to see if there is a variance between each frame so we can tell more about what's going on. What you posted looks okay, but we need more frames in the log to get a true picture.

[Privateer]

Originally posted by MrBill
Agreed. I would like to see more "finished a frame" lines to see actual times to see if there is a variance between each frame so we can tell more about what's going on. What you posted looks okay, but we need more frames in the log to get a true picture.

Heres another this 1 started about 5 am (i think),so far its on 34%
and its taken nearly 6-7 hrs so far,heres a log till now,ill post another when it gets to 99%.(if im up).



# Windows Graphical Edition ################################################## #
################################################## #############################

Folding@Home Client Version 3.1

http://foldingathome.stanford.edu
email:help@foldingathome.stanford.edu

################################################## #############################
################################################## #############################

- Ask before connecting: No
- User name: Privateer. (Team 3365)
- User ID = 12045DC856D9AC35
- Machine ID #1

Benchmarking ...
Loaded queue successfully.
Initialization complete

+ Processing work unit
Core required: FahCore_65.exe (found)

[July 29 00:31:28] Working on Unit 02
+ Working ...
[00:31:28] Folding@Home Client Core Version 2.47 (June 14, 2002)
[00:31:28]
[00:31:28] Proj: work/wudata_02
[00:31:28] nsteps: 500000 dt: 2.000000 dt_dump: 100.000000 temperature: 300.000000
[00:31:28] xyzfile:
[00:31:28] " 201 p145_1L2Yunf
[00:31:28] 1 CH3 0.084811 -30.086389 -36.382456 7 2..."
[00:31:28] keyfile:
[00:31:28] "NOVERSION
[00:31:28] ARCHIVE
[00:31:28]
[00:31:28]
[00:31:28] printout 1000
[00:31:28] writeout 1000
[00:31:28]
[00:31:28] integrate ..."
[00:31:28]
[00:31:28] Hashes matched on file work/wudata_02.dyn
[00:31:29] ARC file integrity verified
[00:31:29] Restarting from checkpointed files.
[00:31:29]
[00:31:29] Protein: p145_1L2Yunf
[00:31:29] - Run: 9 (Clone 0, Gen 20)
[00:31:29] - Frames Completed: 25, Remaining: 75
[00:31:29] - Dynamic steps required: 375000
[00:31:29]
[00:31:29] Writing local files:
[00:31:29]
[00:31:29] parameters work/wudata_02.prm
[00:31:29] - Writing "work/wudata_02.key": (overwrite) successful.
[00:31:29] - Writing "work/wudata_02.xyz": (overwrite) successful.
[00:31:29] - Writing "work/wudata_02.prm": (overwrite) successful.
[00:31:29] - Writing "work/wudata_02.key": (append) successful.
[00:31:29]
[00:31:29] PROJECT="work/wudata_02", NSTEPS=375000, DT=2.0000, DTDUMP=10.000000, TEMP=300.00
[00:31:30] TINKER: Software Tools for Molecular Design
[00:31:30] Version 3.8 October 2000
[00:31:30] Copyright (c) Jay William Ponder 1990-2000
[00:31:30] portions Copyright (c) Michael Shirts 2001
[00:31:30] portions Copyright (c) Vijay S Pande 2001
[00:32:35] Finished a frame (26)
[00:33:39] Finished a frame (27)
[00:34:41] Finished a frame (28)
[00:35:44] Finished a frame (29)
[00:36:49] Finished a frame (30)
[00:37:52] Finished a frame (31)
[00:38:55] Finished a frame (32)
[00:39:57] Finished a frame (33)
[00:41:00] Finished a frame (34)
[00:42:03] Finished a frame (35)
[00:43:06] Finished a frame (36)
[00:44:08] Finished a frame (37)
[00:45:11] Finished a frame (38)
[00:46:13] Finished a frame (39)
[00:47:16] Finished a frame (40)
[00:48:19] Finished a frame (41)
[00:49:39] Finished a frame (42)
[00:50:44] Finished a frame (43)
[00:51:48] Finished a frame (44)
[00:52:52] Finished a frame (45)
[00:53:54] Finished a frame (46)
[00:54:57] Finished a frame (47)
[00:55:59] Finished a frame (48)
[00:57:02] Finished a frame (49)
[00:58:05] Finished a frame (50)
[00:59:08] Finished a frame (51)
[01:00:10] Finished a frame (52)
[01:01:13] Finished a frame (53)
[01:02:16] Finished a frame (54)
[01:03:18] Finished a frame (55)
[01:04:21] Finished a frame (56)
[01:05:23] Finished a frame (57)
[01:06:26] Finished a frame (58)
[01:07:29] Finished a frame (59)
[01:08:31] Finished a frame (60)
[01:09:34] Finished a frame (61)
[01:10:36] Finished a frame (62)
[01:11:39] Finished a frame (63)
[01:12:42] Finished a frame (64)
[01:13:44] Finished a frame (65)
[01:14:47] Finished a frame (66)
[01:15:49] Finished a frame (67)
[01:16:52] Finished a frame (68)
[01:17:55] Finished a frame (69)
[01:18:57] Finished a frame (70)
[01:20:00] Finished a frame (71)
[01:21:03] Finished a frame (72)
[01:22:05] Finished a frame (73)
[01:23:08] Finished a frame (74)
[01:24:10] Finished a frame (75)
[01:25:13] Finished a frame (76)
[01:26:16] Finished a frame (77)
[01:27:18] Finished a frame (78)
[01:28:21] Finished a frame (79)
[01:29:23] Finished a frame (80)
[01:30:26] Finished a frame (81)
[01:31:29] Finished a frame (82)
[01:32:31] Finished a frame (83)
[01:33:34] Finished a frame (84)
[01:34:36] Finished a frame (85)
[01:35:39] Finished a frame (86)
[01:36:42] Finished a frame (87)
[01:37:44] Finished a frame (88)
[01:38:47] Finished a frame (89)
[01:39:49] Finished a frame (90)
[01:40:52] Finished a frame (91)
[01:41:55] Finished a frame (92)
[01:42:57] Finished a frame (93)
[01:44:00] Finished a frame (94)
[01:45:02] Finished a frame (95)
[01:46:05] Finished a frame (96)
[01:47:08] Finished a frame (97)
[01:48:10] Finished a frame (98)
[01:49:13] Finished a frame (99)
[01:50:15] Finished a frame (100)
[01:50:15] TINKER is Exiting following Normal Termination
[01:50:15]
[01:50:15] Finished Work Unit:
[01:50:15] ARC file integrity verified
[01:50:15] logfile size: 20480
[01:50:15] Leaving Run
[01:50:20] - Writing 156344 bytes of core data to disk.
[01:50:20] end (WriteWorkResults)
[01:50:20] - Shutting down core
[01:50:20]
[01:50:20] Folding@Home2 Core Shutdown: FINISHED_UNIT
CoreStatus = 64 (100)
Sending work to server

+ Attempting to send results
- Connecting to server (171.64.122.112:8080)
+ Results successfully sent
+ Number of Units Completed: 2
+ Attempting to get work packet
- Connecting to assignment server
- Successful: assigned to (171.64.122.112).
+ News From Folding@Home: Welcome to Folding@Home
- Connecting to server (171.64.122.112) on port 8080
+ Closed connections

+ Processing work unit
Core required: FahCore_65.exe (found)

[July 29 01:50:45] Working on Unit 03
+ Working ...
[01:50:45] Folding@Home Client Core Version 2.47 (June 14, 2002)
[01:50:45]
[01:50:45] Proj: work/wudata_03
[01:50:45] nsteps: 500000 dt: 2.000000 dt_dump: 100.000000 temperature: 300.000000
[01:50:45] xyzfile:
[01:50:45] " 201 p147_1L2Yunf
[01:50:45] 1 CH3 15.392629 -41.650099 -39.333190 7 2..."
[01:50:45] keyfile:
[01:50:45] "NOVERSION
[01:50:45] ARCHIVE
[01:50:45]
[01:50:45]
[01:50:45] printout 1000
[01:50:45] writeout 1000
[01:50:45]
[01:50:45] integrate ..."
[01:50:45]
[01:50:45] - Couldn't get size info for dyn file: work/wudata_03.dyn
[01:50:45] Starting from initial work packet
[01:50:45]
[01:50:45] Protein: p147_1L2Yunf
[01:50:45] - Run: 25 (Clone 49, Gen 1)
[01:50:45] - Frames Completed: 0, Remaining: 100
[01:50:45] - Dynamic steps required: 500000
[01:50:45]
[01:50:45] Writing local files:
[01:50:45]
[01:50:45] parameters work/wudata_03.prm
[01:50:45] - Writing "work/wudata_03.key": (overwrite) successful.
[01:50:45] - Writing "work/wudata_03.xyz": (overwrite) successful.
[01:50:45] - Writing "work/wudata_03.prm": (overwrite) successful.
[01:50:45] - Writing "work/wudata_03.key": (append) successful.
[01:50:45]
[01:50:45] PROJECT="work/wudata_03", NSTEPS=500000, DT=2.0000, DTDUMP=10.000000, TEMP=300.00
[01:50:46] TINKER: Software Tools for Molecular Design
[01:50:46] Version 3.8 October 2000
[01:50:46] Copyright (c) Jay William Ponder 1990-2000
[01:50:46] portions Copyright (c) Michael Shirts 2001
[01:50:46] portions Copyright (c) Vijay S Pande 2001
[01:51:48] Finished a frame (1)
[01:52:51] Finished a frame (2)
[01:53:54] Finished a frame (3)
[01:54:56] Finished a frame (4)
[01:55:58] Finished a frame (5)
[01:57:01] Finished a frame (6)
[01:58:03] Finished a frame (7)
[01:59:06] Finished a frame (8)
[02:00:08] Finished a frame (9)
[02:01:11] Finished a frame (10)
[02:02:13] Finished a frame (11)
[02:03:16] Finished a frame (12)
[02:04:18] Finished a frame (13)
[02:05:21] Finished a frame (14)
[02:06:23] Finished a frame (15)
[02:07:26] Finished a frame (16)
[02:08:29] Finished a frame (17)
[02:09:31] Finished a frame (18)
[02:10:33] Finished a frame (19)
[02:11:36] Finished a frame (20)
[02:12:38] Finished a frame (21)
[02:13:41] Finished a frame (22)
[02:14:44] Finished a frame (23)
[02:15:46] Finished a frame (24)
[02:16:48] Finished a frame (25)
[02:17:51] Finished a frame (26)
[02:18:53] Finished a frame (27)
[02:19:56] Finished a frame (28)
[02:20:58] Finished a frame (29)
[02:22:01] Finished a frame (30)
[02:23:03] Finished a frame (31)
[02:24:06] Finished a frame (32)
[02:25:08] Finished a frame (33)
[02:26:11] Finished a frame (34)
[02:27:13] Finished a frame (35)
[02:28:16] Finished a frame (36)
[02:29:19] Finished a frame (37)
[02:30:21] Finished a frame (38)
[02:31:24] Finished a frame (39)
[02:32:26] Finished a frame (40)
[02:33:29] Finished a frame (41)
[02:34:32] Finished a frame (42)
[02:35:34] Finished a frame (43)
[02:36:36] Finished a frame (44)
[02:37:39] Finished a frame (45)
[02:38:41] Finished a frame (46)
[02:39:44] Finished a frame (47)
[02:40:47] Finished a frame (48)
[02:41:49] Finished a frame (49)
[02:42:52] Finished a frame (50)
[02:43:54] Finished a frame (51)
[02:44:57] Finished a frame (52)
[02:45:59] Finished a frame (53)
[02:47:02] Finished a frame (54)
[02:48:04] Finished a frame (55)
[02:49:07] Finished a frame (56)
[02:50:10] Finished a frame (57)
[02:51:12] Finished a frame (58)
[02:52:14] Finished a frame (59)
[02:53:17] Finished a frame (60)
[02:54:19] Finished a frame (61)
[02:55:22] Finished a frame (62)
[02:56:24] Finished a frame (63)
[02:57:27] Finished a frame (64)
[02:58:29] Finished a frame (65)
[02:59:32] Finished a frame (66)
[03:00:34] Finished a frame (67)
[03:01:37] Finished a frame (68)
[03:02:39] Finished a frame (69)
[03:03:42] Finished a frame (70)
[03:04:45] Finished a frame (71)
[03:05:47] Finished a frame (72)
[03:06:49] Finished a frame (73)
[03:07:52] Finished a frame (74)
[03:08:54] Finished a frame (75)
[03:09:57] Finished a frame (76)
[03:11:00] Finished a frame (77)
[03:12:02] Finished a frame (78)
[03:13:05] Finished a frame (79)
[03:14:07] Finished a frame (80)
[03:15:10] Finished a frame (81)
[03:16:12] Finished a frame (82)
[03:17:15] Finished a frame (83)
[03:18:17] Finished a frame (84)
[03:19:20] Finished a frame (85)
[03:20:23] Finished a frame (86)
[03:21:25] Finished a frame (87)
[03:22:27] Finished a frame (88)
[03:23:30] Finished a frame (89)
[03:24:32] Finished a frame (90)
[03:25:35] Finished a frame (91)
[03:26:38] Finished a frame (92)
[03:27:40] Finished a frame (93)
[03:28:42] Finished a frame (94)
[03:29:45] Finished a frame (95)
[03:30:48] Finished a frame (96)
[03:31:50] Finished a frame (97)
[03:32:52] Finished a frame (98)
[03:33:55] Finished a frame (99)
[03:34:58] Finished a frame (100)
[03:34:58] TINKER is Exiting following Normal Termination
[03:34:58]
[03:34:58] Finished Work Unit:
[03:34:58] ARC file integrity verified
[03:34:58] logfile size: 20480
[03:34:58] Leaving Run
[03:35:03] - Writing 156344 bytes of core data to disk.
[03:35:03] end (WriteWorkResults)
[03:35:03] - Shutting down core
[03:35:03]
[03:35:03] Folding@Home2 Core Shutdown: FINISHED_UNIT
CoreStatus = 64 (100)
Sending work to server

+ Attempting to send results
- Connecting to server (171.64.122.112:8080)
+ Results successfully sent
+ Number of Units Completed: 3
+ Attempting to get work packet
- Connecting to assignment server
- Successful: assigned to (171.64.122.112).
+ News From Folding@Home: Welcome to Folding@Home
- Connecting to server (171.64.122.112) on port 8080
+ Closed connections

+ Processing work unit
Core required: FahCore_65.exe (found)

[July 29 03:35:25] Working on Unit 04
+ Working ...
[03:35:25] Folding@Home Client Core Version 2.47 (June 14, 2002)
[03:35:25]
[03:35:25] Proj: work/wudata_04
[03:35:25] nsteps: 500000 dt: 2.000000 dt_dump: 100.000000 temperature: 300.000000
[03:35:25] xyzfile:
[03:35:25] " 201 p140_1L2Yunf
[03:35:25] 1 CH3 109.076911 152.474537 937.838184 7 2..."
[03:35:25] keyfile:
[03:35:25] "NOVERSION
[03:35:25] ARCHIVE
[03:35:25]
[03:35:25]
[03:35:25] printout 1000
[03:35:25] writeout 1000
[03:35:25]
[03:35:25] integrate ..."
[03:35:25]
[03:35:25] - Couldn't get size info for dyn file: work/wudata_04.dyn
[03:35:25] Starting from initial work packet
[03:35:25]
[03:35:25] Protein: p140_1L2Yunf
[03:35:25] - Run: 7 (Clone 97, Gen 59)
[03:35:25] - Frames Completed: 0, Remaining: 100
[03:35:25] - Dynamic steps required: 500000
[03:35:25]
[03:35:25] Writing local files:
[03:35:25]
[03:35:25] parameters work/wudata_04.prm
[03:35:25] - Writing "work/wudata_04.key": (overwrite) successful.
[03:35:25] - Writing "work/wudata_04.xyz": (overwrite) successful.
[03:35:25] - Writing "work/wudata_04.prm": (overwrite) successful.
[03:35:25] - Writing "work/wudata_04.key": (append) successful.
[03:35:25]
[03:35:25] PROJECT="work/wudata_04", NSTEPS=500000, DT=2.0000, DTDUMP=10.000000, TEMP=300.00
[03:35:26] TINKER: Software Tools for Molecular Design
[03:35:26] Version 3.8 October 2000
[03:35:26] Copyright (c) Jay William Ponder 1990-2000
[03:35:26] portions Copyright (c) Michael Shirts 2001
[03:35:26] portions Copyright (c) Vijay S Pande 2001
[03:36:28] Finished a frame (1)
[03:37:31] Finished a frame (2)
[03:38:33] Finished a frame (3)
[03:39:35] Finished a frame (4)
[03:40:38] Finished a frame (5)
[03:41:40] Finished a frame (6)
[03:42:42] Finished a frame (7)
[03:43:45] Finished a frame (8)
[03:44:47] Finished a frame (9)
[03:45:50] Finished a frame (10)
[03:46:52] Finished a frame (11)
[03:47:54] Finished a frame (12)
[03:48:57] Finished a frame (13)
[03:49:59] Finished a frame (14)
[03:51:01] Finished a frame (15)
[03:52:04] Finished a frame (16)
[03:53:06] Finished a frame (17)
[03:54:09] Finished a frame (18)
[03:55:11] Finished a frame (19)
[03:56:13] Finished a frame (20)
[03:57:16] Finished a frame (21)
[03:58:18] Finished a frame (22)
[03:59:21] Finished a frame (23)
[04:00:23] Finished a frame (24)
[04:01:25] Finished a frame (25)
[04:02:27] Finished a frame (26)
[04:03:30] Finished a frame (27)
[04:04:32] Finished a frame (28)
[04:05:35] Finished a frame (29)
[04:06:37] Finished a frame (30)
[04:07:39] Finished a frame (31)
[04:08:41] Finished a frame (32)
[04:09:44] Finished a frame (33)
[04:10:47] Finished a frame (34)
[04:11:49] Finished a frame (35)
[04:12:51] Finished a frame (36)
[04:13:53] Finished a frame (37)
[04:14:56] Finished a frame (38)
[04:15:58] Finished a frame (39)
[04:17:01] Finished a frame (40)
[04:18:03] Finished a frame (41)
[04:19:05] Finished a frame (42)
[04:20:08] Finished a frame (43)
[04:21:10] Finished a frame (44)
[04:22:12] Finished a frame (45)
[04:23:15] Finished a frame (46)
[04:24:17] Finished a frame (47)
[04:25:20] Finished a frame (48)
[04:26:22] Finished a frame (49)
[04:27:24] Finished a frame (50)
[04:28:26] Finished a frame (51)
[04:29:29] Finished a frame (52)
[04:30:31] Finished a frame (53)
[04:31:34] Finished a frame (54)
[04:32:36] Finished a frame (55)
[04:33:38] Finished a frame (56)
[04:34:41] Finished a frame (57)
[04:35:43] Finished a frame (58)
[04:36:46] Finished a frame (59)
[04:37:48] Finished a frame (60)
[04:38:50] Finished a frame (61)
[04:39:53] Finished a frame (62)
[04:40:55] Finished a frame (63)
[04:41:57] Finished a frame (64)
[04:43:00] Finished a frame (65)
[04:44:02] Finished a frame (66)
[04:45:05] Finished a frame (67)
[04:46:07] Finished a frame (68)
[04:47:09] Finished a frame (69)
[04:48:12] Finished a frame (70)
[04:49:14] Finished a frame (71)
[04:50:17] Finished a frame (72)
[04:51:19] Finished a frame (73)
[04:52:21] Finished a frame (74)
[04:53:24] Finished a frame (75)
[04:54:26] Finished a frame (76)
[04:55:29] Finished a frame (77)
[04:56:31] Finished a frame (78)
[04:57:33] Finished a frame (79)
[04:58:36] Finished a frame (80)
[04:59:38] Finished a frame (81)
[05:00:41] Finished a frame (82)
[05:01:43] Finished a frame (83)
[05:02:45] Finished a frame (84)
[05:03:47] Finished a frame (85)
[05:04:50] Finished a frame (86)
[05:05:53] Finished a frame (87)
[05:06:55] Finished a frame (88)
[05:07:57] Finished a frame (89)
[05:08:59] Finished a frame (90)
[05:10:02] Finished a frame (91)
[05:11:04] Finished a frame (92)
[05:12:07] Finished a frame (93)
[05:13:09] Finished a frame (94)
[05:14:11] Finished a frame (95)
[05:15:14] Finished a frame (96)
[05:16:16] Finished a frame (97)
[05:17:19] Finished a frame (98)
[05:18:21] Finished a frame (99)
[05:19:23] Finished a frame (100)
[05:19:23] TINKER is Exiting following Normal Termination
[05:19:23]
[05:19:23] Finished Work Unit:
[05:19:23] ARC file integrity verified
[05:19:23] logfile size: 20480
[05:19:23] Leaving Run
[05:19:28] - Writing 156344 bytes of core data to disk.
[05:19:28] end (WriteWorkResults)
[05:19:28] - Shutting down core
[05:19:28]
[05:19:28] Folding@Home2 Core Shutdown: FINISHED_UNIT
CoreStatus = 64 (100)
Sending work to server

+ Attempting to send results
- Connecting to server (171.64.122.112:8080)
+ Results successfully sent
+ Number of Units Completed: 4
+ Attempting to get work packet
- Connecting to assignment server
- Successful: assigned to (171.64.122.112).
+ News From Folding@Home: Welcome to Folding@Home
- Connecting to server (171.64.122.112) on port 8080
+ Closed connections

+ Processing work unit
Core required: FahCore_65.exe (found)

[July 29 05:19:48] Working on Unit 05
+ Working ...
[05:19:49] Folding@Home Client Core Version 2.47 (June 14, 2002)
[05:19:49]
[05:19:49] Proj: work/wudata_05
[05:19:49] nsteps: 5000000 dt: 2.000000 dt_dump: 1000.000000 temperature: 300.000000
[05:19:49] xyzfile:
[05:19:49] " 201 p145_1L2Yunf
[05:19:49] 1 CH3 -46.327401 -31.437542 -1.601147 7 2..."
[05:19:49] keyfile:
[05:19:49] "NOVERSION
[05:19:49] ARCHIVE
[05:19:49]
[05:19:49]
[05:19:49] printout 1000
[05:19:49] writeout 1000
[05:19:49]
[05:19:49] integrate ..."
[05:19:49]
[05:19:49] - Couldn't get size info for dyn file: work/wudata_05.dyn
[05:19:49] Starting from initial work packet
[05:19:49]
[05:19:49] Protein: p145_1L2Yunf
[05:19:49] - Run: 23 (Clone 87, Gen 3)
[05:19:49] - Frames Completed: 0, Remaining: 100
[05:19:49] - Dynamic steps required: 5000000
[05:19:49]
[05:19:49] Writing local files:
[05:19:49]
[05:19:49] parameters work/wudata_05.prm
[05:19:49] - Writing "work/wudata_05.key": (overwrite) successful.
[05:19:49] - Writing "work/wudata_05.xyz": (overwrite) successful.
[05:19:49] - Writing "work/wudata_05.prm": (overwrite) successful.
[05:19:49] - Writing "work/wudata_05.key": (append) successful.
[05:19:49]
[05:19:49] PROJECT="work/wudata_05", NSTEPS=5000000, DT=2.0000, DTDUMP=100.000000, TEMP=300.00
[05:19:50] TINKER: Software Tools for Molecular Design
[05:19:50] Version 3.8 October 2000
[05:19:50] Copyright (c) Jay William Ponder 1990-2000
[05:19:50] portions Copyright (c) Michael Shirts 2001
[05:19:50] portions Copyright (c) Vijay S Pande 2001
[05:30:15] Finished a frame (1)
[05:40:41] Finished a frame (2)
[05:51:07] Finished a frame (3)
[06:01:32] Finished a frame (4)
[06:11:57] Finished a frame (5)
[06:22:22] Finished a frame (6)
[06:32:48] Finished a frame (7)
[06:43:14] Finished a frame (8)
[06:53:39] Finished a frame (9)
[07:04:04] Finished a frame (10)
[07:14:30] Finished a frame (11)
[07:24:56] Finished a frame (12)
[07:35:21] Finished a frame (13)
[07:45:47] Finished a frame (14)
[07:56:12] Finished a frame (15)
[08:06:37] Finished a frame (16)
[08:17:03] Finished a frame (17)
[08:27:28] Finished a frame (18)
[08:37:54] Finished a frame (19)
[08:48:19] Finished a frame (20)
[08:58:44] Finished a frame (21)
[09:09:10] Finished a frame (22)
[09:19:35] Finished a frame (23)
[09:30:00] Finished a frame (24)
[09:40:26] Finished a frame (25)
[09:50:51] Finished a frame (26)
[10:01:17] Finished a frame (27)
[10:11:42] Finished a frame (28)
[10:22:07] Finished a frame (29)
[10:32:33] Finished a frame (30)
[10:43:00] Finished a frame (31)
[10:53:27] Finished a frame (32)
[11:03:54] Finished a frame (33)
[11:14:30] Finished a frame (34)
Opening "C:\Program Files\Internet Explorer\iexplore.exe" -nohome http://folding.stanford.edu/cgi-bin/userpage?q=Privateer. http://folding.stanford.edu/cgi-bin/userpage?q=Privateer.

[Hardass]

That P145 you just completed showed a frame time of about a min per frame, I am doing the same P145 and my frame time is 8 min per frame. So it could very well be you have been getting some very tough protiens. This one is taking hours and it is only 75%. Now the second one you are working on is taking 10min per frame.

[Privateer]

Originally posted by Hardass
That P145 you just completed showed a frame time of about a min per frame, I am doing the same P145 and my frame time is 8 min per frame. So it could very well be you have been getting some very tough protiens. This one is taking hours and it is only 75%. Now the second one you are working on is taking 10min per frame.

Your so far ahead a 16hr protein will not hurt.
DDTUNG Started after me and hes on 77 folds 126 points in the time hes had hes been lucky i guess.i had 3 12-16 hr proteins in a row,nearly 3 days to do 3 folds.

[DDTUNG]

The P145 you are folding requires 5000000 dynamic steps and gives you a score of 6 points, versus 0.6 for the others that you showed in your log.

Nothing abnormal so far.

DDTUNG:cool:

[DDTUNG]

If you don't like the big proteins you can always delete the work file and download another one until you are happy with what you get.

DDTUNG:cool:

[Privateer]

Originally posted by DDTUNG
If you don't like the big proteins you can always delete the work file and download another one until you are happy with what you get.

DDTUNG:cool:

I do that look at my log the first three were ok i went to bed and a long 1 started and itl be going when i go to bed tonight .i expect ull be able to answer this,if some proteins take many hours longer is the score comparitive.

[Privateer]

Originally posted by Privateer


I do that look at my log the first three were ok i went to bed and a long 1 started and itl be going when i go to bed tonight .i expect ull be able to answer this,if some proteins take many hours longer is the score comparitive.

OOps sory ive just noticed you answered while i was typing.

[MrBill]

That last line in your file shows opening IE. Someone had a problem with this before where IE opened and the next frame took like 2 hrs. I'll try to research that tonight.

I do recommend you try using the text-only console because it is a tad faster than the GUI version.

[Privateer]

Originally posted by MrBill
That last line in your file shows opening IE. Someone had a problem with this before where IE opened and the next frame took like 2 hrs. I'll try to research that tonight.

I do recommend you try using the text-only console because it is a tad faster than the GUI version.

Its flying. not folding a staggering 45% after 8hrs,:D

[Privateer]

Done.

[MrBill]

Your log looks fine. Even with opening IE, your frame times look acceptable for a P146 (mislabled P145).

Apparently you are clicking on a link in the GUI version that is opening IE and writing to the log. It doesn't appear to be having an impact on your frame times though.

If you want to gain a fraction more speed, use the text-only console version. :)

Otherwise, Fold On!!

[Privateer]

I will install the console version after this haws finished,its on
72% ,its been folding 4 seven hrs ill let it finish.

[Privateer]

Done

[DDTUNG]

Congrats on finishing the monster! If you don't like the 145s, send them to me in the future. My XP2100 and Vapochill system finishes one in less than 12 hours. It just loves them.:D

DDTUNG:cool:

[Privateer]

[07:10:52] Finished a frame (57)
[07:20:33] Finished a frame (58)
[07:30:14] Finished a frame (59)
[07:39:55] Finished a frame (60)
[07:49:35] Finished a frame (61)
[07:59:16] Finished a frame (62)
[08:09:12] Finished a frame (63)

[JBELL]

My current WU:



[July 31 06:24:42] Working on Unit 03
+ Working ...
[06:24:42] Folding@Home Client Core Version 2.47 (June 14, 2002)
[06:24:42]
[06:24:42] Proj: work/wudata_03
[06:24:42] nsteps: 500000 dt: 2.000000 dt_dump: 100.000000 temperature: 278.000000
[06:24:42] xyzfile:
[06:24:42] " 264 p604_bba5F8W_ext_278
[06:24:42] 1 CH3 -57.113999 -0.015852 3.921676 ..."
[06:24:42] keyfile:
[06:24:42] "#parameters ./opls.prm
[06:24:42] NOVERSION
[06:24:42] ARCHIVE
[06:24:42]
[06:24:42] cutoff 16.0
[06:24:42] taper 12.0
[06:24:42] ..."
[06:24:42]
[06:24:42] - Couldn't get size info for dyn file: work/wudata_03.dyn
[06:24:42] Starting from initial work packet
[06:24:42]
[06:24:42] Protein: p604_bba5F8W_ext_278
[06:24:42] - Run: 39 (Clone 73, Gen 12)
[06:24:42] - Frames Completed: 0, Remaining: 100
[06:24:42] - Dynamic steps required: 500000
[06:24:42]
[06:24:42] Writing local files:
[06:24:42]
[06:24:42] parameters work/wudata_03.prm
[06:24:42] - Writing "work/wudata_03.key": (overwrite) successful.
[06:24:42] - Writing "work/wudata_03.xyz": (overwrite) successful.
[06:24:42] - Writing "work/wudata_03.prm": (overwrite) successful.
[06:24:42] - Writing "work/wudata_03.key": (append) successful.
[06:24:42]
[06:24:42] PROJECT="work/wudata_03", NSTEPS=500000, DT=2.0000, DTDUMP=10.000000, TEMP=278.00
[06:24:43] TINKER: Software Tools for Molecular Design
[06:24:43] Version 3.8 October 2000
[06:24:43] Copyright (c) Jay William Ponder 1990-2000
[06:24:43] portions Copyright (c) Michael Shirts 2001
[06:24:43] portions Copyright (c) Vijay S Pande 2001
[06:26:11] Finished a frame (1)
[06:27:39] Finished a frame (2)
[06:29:06] Finished a frame (3)
[06:30:34] Finished a frame (4)
[06:32:03] Finished a frame (5)
[06:33:31] Finished a frame (6)
[06:34:59] Finished a frame (7)
[06:36:27] Finished a frame (8)
[06:37:55] Finished a frame (9)
[06:39:23] Finished a frame (10)
[06:40:51] Finished a frame (11)
[06:42:20] Finished a frame (12)
[06:43:49] Finished a frame (13)
[06:45:18] Finished a frame (14)
[06:46:48] Finished a frame (15)
[06:48:18] Finished a frame (16)
[06:49:46] Finished a frame (17)
[06:51:14] Finished a frame (18)
[06:52:43] Finished a frame (19)
[06:54:12] Finished a frame (20)
[06:55:41] Finished a frame (21)
[06:57:09] Finished a frame (22)
[06:58:39] Finished a frame (23)
[07:00:07] Finished a frame (24)
[07:01:35] Finished a frame (25)
[07:03:04] Finished a frame (26)
[07:04:33] Finished a frame (27)
[07:06:02] Finished a frame (28)
[07:07:31] Finished a frame (29)
[07:08:59] Finished a frame (30)
[07:10:28] Finished a frame (31)
[07:11:56] Finished a frame (32)
[07:13:25] Finished a frame (33)
[07:14:53] Finished a frame (34)
[07:16:22] Finished a frame (35)
[07:17:50] Finished a frame (36)
[07:19:18] Finished a frame (37)
[07:20:46] Finished a frame (38)
[07:22:15] Finished a frame (39)
[07:23:42] Finished a frame (40)
[07:25:10] Finished a frame (41)
[07:26:38] Finished a frame (42)
[07:28:07] Finished a frame (43)
[07:29:35] Finished a frame (44)
[07:31:03] Finished a frame (45)
[07:32:41] Finished a frame (46)
[07:34:16] Finished a frame (47)
[07:35:48] Finished a frame (48)
[07:37:20] Finished a frame (49)
[07:38:49] Finished a frame (50)
[07:40:21] Finished a frame (51)
[07:41:58] Finished a frame (52)
[07:43:39] Finished a frame (53)
[07:45:14] Finished a frame (54)
[07:46:48] Finished a frame (55)
[07:48:21] Finished a frame (56)
[07:50:17] Finished a frame (57)
[07:52:13] Finished a frame (58)
[07:53:46] Finished a frame (59)
[07:55:18] Finished a frame (60)
[07:56:49] Finished a frame (61)
[07:58:31] Finished a frame (62)
[08:00:01] Finished a frame (63)
[08:04:42] Finished a frame (64)
[08:06:53] Finished a frame (65)
[08:08:30] Finished a frame (66)
[08:10:00] Finished a frame (67)
[08:11:30] Finished a frame (68)
[08:13:01] Finished a frame (69)
[08:14:31] Finished a frame (70)
[08:18:38] Finished a frame (71)

[Privateer]

I wish i had that.

ILL MAKE A PREDICTION.

MY next WU will be just as long.

[JBELL]

yeah and a personal request - can we cut back on the long posts? and edit the ones already in here?? thanks

[Privateer]

[11:46:03] Protein: p144_1L2Yunf
[11:46:03] - Run: 0 (Clone 55, Gen 36)
[11:46:03] - Frames Completed: 0, Remaining: 100
[11:46:03] - Dynamic steps required: 500000
[11:46:03]
[11:46:03] Writing local files:
[11:46:03]
[11:46:03] parameters work/wudata_02.prm
[11:46:03] - Writing "work/wudata_02.key": (overwrite) successful.
[11:46:03] - Writing "work/wudata_02.xyz": (overwrite) successful.
[11:46:03] - Writing "work/wudata_02.prm": (overwrite) successful.
[11:46:03] - Writing "work/wudata_02.key": (append) successful.
[11:46:03]
[11:46:03] PROJECT="work/wudata_02", NSTEPS=500000, DT=2.0000, DTDUMP=10.000000, TEMP=300.00
[11:46:04] TINKER: Software Tools for Molecular Design
[11:46:04] Version 3.8 October 2000
[11:46:04] Copyright (c) Jay William Ponder 1990-2000
[11:46:04] portions Copyright (c) Michael Shirts 2001
[11:46:04] portions Copyright (c) Vijay S Pande 2001
[11:46:57] Finished a frame (1)
[11:47:50] Finished a frame (2)
[11:48:44] Finished a frame (3)
[11:49:37] Finished a frame (4)
[11:50:31] Finished a frame (5)
[11:51:24] Finished a frame (6)
[11:52:17] Finished a frame (7)

[Privateer]

DDTUNG.
What MHZ is your vapo.

[DDTUNG]

Cruising along at 2100 MHZ. Max is about 40MHZ more.

DDTUNG:cool:

[Privateer]

[QUOTE]Originally posted by DDTUNG
Cruising along at 2100 MHZ. Max is about 40MHZ more.

DDTUNG:cool: [/QUOTe

Thats why your flying!!!!!!!

[Privateer]

To get that faster fold o/cing is important,something i like doing,but on one of my pc the minute i try to oc it stops booting on 26 every time i have to reset bios jumper.mobo is 8K3A+ and XP2000+.does anyone have any ideas.
Thnx in advanced.