Can someone in the know check my BIOS please?

[Draxx]

Hi chaps,

Just modified my Gainward 4850 BIOS via RBE 1.14 and need to make sure it's good before I flash.

I think I have increased GPU voltage to the maximum 1.158v (if I can go higher, then let me know) - Have I put the voltage in the correct boxes?

I have also slightly modded the fan profile, again is this ok?

Lastly I have increased Overdrive limits using the method 1 hash. Again ok?

Thanks

Paul

[jimmyz]

Hi chaps,

Just modified my Gainward 4850 BIOS via RBE 1.14 and need to make sure it's good before I flash.

I think I have increased GPU voltage to the maximum 1.158v (if I can go higher, then let me know) - Have I put the voltage in the correct boxes?

I have also slightly modded the fan profile, again is this ok?

Lastly I have increased Overdrive limits using the method 1 hash. Again ok?

Thanks

Paul

Looks good to me and I also showed it to the author and he said it looks fine to him.

[Draxx]

Nice one guys, so I'll hold you totally responsable if it all goes wrong ;)

Best way to flash? USB key?

[jimmyz]

winflash is the best for this program, that is why the author has a tab in the program to get the latest.

[Draxx]

Jimmyz, quick question.

Regarding the voltage, should I not increase to 1.158v for boot and UVD? Or will it goto 1.2v in 3D fine as it is?

[jimmyz]

It will switch fine. just raise the voltage in states where the clocks are increased.

[Draxx]

It will switch fine. just raise the voltage in states where the clocks are increased.

Ah, so is it best to use the following BIOS mod? i.e. all higher clock speeds have 1.158v?

Or stick with my original mod?

Sorry for all the questions, but I'm confused with all the voltage boxes and clock speeds ;)