PDA

View Full Version : 13x and higher

Lalle
10-02-2003, 01:53 AM
I need to unlock the 13x multiplier and above on my XP2500+

I remember a thread here on XS showing that this could be done with a wire trick.

Anyone know how?
shray
10-02-2003, 03:13 AM
YEah, that wire trick is from that .de site. Basically you set it to socket, and say 13X and put in your mhz speed etc.. I did it and it works great :)
Lalle
10-02-2003, 03:32 AM
I have seen that page but I remember that I could connect two pins and get all 13x and up options in the bios to choose.
Lalle
10-02-2003, 11:43 AM
Cmon.. anyone? I need help :am:
Evil_Spork
10-02-2003, 12:21 PM
www.ocinside.de
Holst
10-02-2003, 01:16 PM
I did this to my barton 3200 (also 11X multi)

What you need to do is cut the fith and third L3 bridges, this unlocked mine from 7-17X multi.

I cut the bridges by pushing a scalpel into the bridge, a very scary thing to do on an Xp-3200 :D
Lalle
10-02-2003, 01:30 PM
What you need to do is cut the fith and third L3 bridges, this unlocked mine from 7-17X multi.

I cut the bridges by pushing a scalpel into the bridge, a very scary thing to do on an Xp-3200
Like you said, it's a scary thing to do this on a good CPU.

I am 99% sure that it can be done by just connecting two pins using a wire.

The OCInside.de way is just a big pain in the ass, that every time I want to change the multiplier I would have to remove my Prometeia cooling, fix the wires and then install the Prometeia again.
shray
10-02-2003, 02:05 PM
Originally posted by Lalle
Like you said, it's a scary thing to do this on a good CPU.

I am 99% sure that it can be done by just connecting two pins using a wire.

The OCInside.de way is just a big pain in the ass, that every time I want to change the multiplier I would have to remove my Prometeia cooling, fix the wires and then install the Prometeia again. Another thing bad would be if he has new packaging like i do. :(
Evil_Spork
10-02-2003, 02:40 PM
yeah ive been looking EVERYWHERE and thats the only method i can find........