View Full Version : 6200TC vmod
cdawall
09-01-2008, 12:44 PM
anyone know the vmod for a 128mb pci-e 6200TC? its an aopen
http://img.techpowerup.org/080901/0901081430.jpg
http://img.techpowerup.org/080901/0901081431.jpg
http://img.techpowerup.org/080901/0901081432.jpg
http://img.techpowerup.org/080901/0901081432a.jpg
http://img.techpowerup.org/080901/0901081432b.jpg
pics are from my cellphone so sorry about the quality
bartx
09-01-2008, 01:11 PM
Please post marks of IC's:
- this one which is near "Made in China" sticker
- both from last photo
- this one near DVI
If I get these marks, I can find datasheets.
cdawall
09-02-2008, 04:15 AM
i missed one of the pics here is another one
http://img.techpowerup.org/080902/0902080607.jpg
the one on the front:
74HCT08D
AV798 21
Un60546E
the two on the back
RT9214
PS7ME05
and
CU257
58M
C7OF
the one near the made in China sticker
LM324DG
PMP521
one next to model number sticker
RT31738
P57W323
cdawall
09-07-2008, 05:35 PM
bump
cowie
09-09-2008, 04:11 AM
i think if i remember right ..just add volts with nhbitor and bios flash
cdawall
09-09-2008, 01:44 PM
wat would that max out at?
i found nemo
09-09-2008, 02:49 PM
nhbitor don't work, i tried it on my 6600gt for 1.55v's and nothing improved.
<<HANNIBAL>>
02-19-2009, 01:41 PM
bump
also interested in Vmodding this card, only with 256mb ram
so the nhbitor doesn't work with this cards?
if its so help with the hardware vmod pls
RT9214 is a PWM controller - so thats the way
here is the datasheet http://www.richtek.com/download.jsp?t=UyUyRmFzc2V0cyUyRnByb2R1Y3RfZmlsZSU yRlJUOTIxNCUyRkRTOTIxNC0xMy5wZGYlM0QlM0Ql%0AM0REUz kyMTQtMTND
measure the resistance between 6. pin and ground
btw: a makro pic from the controller area would by good ;)
kaptan54
02-26-2009, 06:41 AM
RT9214 is a PWM controller - so thats the way
here is the datasheet http://www.richtek.com/download.jsp?t=UyUyRmFzc2V0cyUyRnByb2R1Y3RfZmlsZSU yRlJUOTIxNCUyRkRTOTIxNC0xMy5wZGYlM0QlM0Ql%0AM0REUz kyMTQtMTND
measure the resistance between 6. pin and ground
btw: a makro pic from the controller area would by good ;)
The schematic picture of absolutely RT9214 controller pwm help on how to connect my will ..
http://img26.imageshack.us/img26/7572/modd.jpg (http://img26.imageshack.us/my.php?image=modd.jpg)
http://img26.imageshack.us/img26/modd.jpg/1/w416.png (http://g.imageshack.us/img26/modd.jpg/1/)