Crazy D9GMH

[Oj101]

Team PC6400:

Firstly, 562.3MHz CL 3 2.5v:
http://valid.x86-secret.com/cache/screenshot/407654.png
Link (http://valid.x86-secret.com/show_oc.php?id=407654)

500MHz CL 4 Pi Stable 1.95v
http://i140.photobucket.com/albums/r35/Oj10101/2vc4.jpg

533.6MHz CL 3 Pi Stable 2.5v
http://i140.photobucket.com/albums/r35/Oj10101/533c3.jpg

EDIT: The only thing stopping me from validating higher at CL 3 was the coldbug @ ~282MHz.

[makaka]

Nice result , what kind of cooling are using in the ram

[Oj101]

Jeez you've got a lot of smilies in your sig :D

I'm just using a Tornado :)

[CryptiK]

Nice CAS 3 results. Do you have any CAS 4 and 5 results? I would think 1200 CAS 4 and 1300 - 1400 CAS 5 should be possible at that voltage, depending how your ram scales.

[TraX]

Nice ram J! :up:
I'm also interested to see c4 / c5 clocks :)

[akkinooo]

Very nice cas3 clocks. Cas5 max score waiting:)

[Oj101]

At the moment 562.3mhz is my maximum for any cas latency as I'm fsb limited. I'll stretch its lets sometime next month :)

I have done 660mhz c4 at 2.42v but I don't have the results at hand anymore :(

[WaterFlex]

Good Job:)

[AngryArtichoke]

I wish they were still pumping these IC's out of the fabs. GMH is some insane RAM! Very nice job on the overclock. I'd be too scared to hit 2.5V

[CryptiK]

At the moment 562.3mhz is my maximum for any cas latency as I'm fsb limited. I'll stretch its lets sometime next month :)

I have done 660mhz c4 at 2.42v but I don't have the results at hand anymore :(

Damn, you need to get those sticks in an intel setup pronto :D

Good results though, and CAS 4 660 is awesome.

[naokaji]

Team PC6400:
Firstly, 562.3MHz CL 3 2.5v


Team 6400 with D9GMH... oh sweet memories.

2,5V for 562 C3 is crazy, ususally you wont even get 500 c3 with such low voltage, 550+ ususally needs close to or above 3V.

I smell worldrecord ram, get a p35 board and go for 600 c3:up:

[zsamz_]

I wish they were still pumping these IC's out of the fabs. GMH is some insane RAM! Very nice job on the overclock. I'd be too scared to hit 2.5V

you should be lol
i hit 2.5v on a set n got degraded
another set 2.8v did nothin :rofl:

[CryptiK]

you should be lol
i hit 2.5v on a set n got degraded
another set 2.8v did nothin :rofl:

Which brand/type got degraded and which ones were ok? I assume that was using the same motherboard/psu?

[fatguy1992]

Thats awesome :up: I want to try my RAM at 2.5v on day.

[zsamz_]

Which brand/type got degraded and which ones were ok? I assume that was using the same motherboard/psu?

i pushed 2.5v lmao into ballistix but they still do 1200 with 2.05 so not too bad
not the boards fau;t was mine i was tryin to break 12000mb/s but i was close heres a pic lol
i will break 12000mb/s if i gotta kill a set or 2:rofl:

i got 10+ sets so is ok lol

[CryptiK]

Damn that was close. That's pretty crazy voltage, but as you say, if you have 10+ sets (Damn dude, that's like $1K+ of D9 :D) you can afford to thrash one or two sets.

[trans am]

Very nice everest bench

[mad_skills]

Team 6400 with D9GMH... oh sweet memories.

2,5V for 562 C3 is crazy, ususally you wont even get 500 c3 with such low voltage, 550+ ususally needs close to or above 3V.

I smell worldrecord ram, get a p35 board and go for 600 c3:up:

Yes, that's true. My Team's needed 2.6V for 450Mhz 3-3-3-8.

[Data_]

Awesome result

[fatguy1992]

Yes, that's true. My Team's needed 2.6V for 450Mhz 3-3-3-8.

I got 427MHz @ 3-2-2-1 W/ 2.4v.

[OdinEidolon]

i havent understood what rams you are using.
are they TXDD2048M800HC4DC?

[mad_skills]

I got 427MHz @ 3-2-2-1 W/ 2.4v.
On what ram?

@OdinEidolon You can see in the Cpu-Z screenshot here: http://valid.x86-secret.com/show_oc.php?id=407654 that those are 2x1Gb 6400 Team rams. ;)

[fatguy1992]

On what ram?



My Corsair Dominator PC2 8500 :) Its D9GMH or D9GKX not sure.

[OdinEidolon]

On what ram?

@OdinEidolon You can see in the Cpu-Z screenshot here: http://valid.x86-secret.com/show_oc.php?id=407654 that those are 2x1Gb 6400 Team rams. ;)

i know that but there are lots of team 6400 ram, for example:

TXDD2048M800HC4DC
TXDD2048M800HC4DC-D
TXDD2048M800HC5DC

there are others, of course, and tehre are different revisions which change the hsf (the first was silver for the TXDD2048M800HC4DC, now is black)

[dsaraolu]

Team Xtreem DDR2 800Mhz/1000MHz 2*1024MB with 2.45V => Super PI 4M (FSB 457)

[mad_skills]

My Corsair Dominator PC2 8500 :) Its D9GMH or D9GKX not sure.
I was referring to my Team X, this is a topic about them, not Dominators. :)

@OdinEidolon I am rather sure that Xtreem Dark (TXDD2048M800HC4DC-D) which you mentioned in that mini list couldn't have pulled this off since they are ProMOS only. :D
That leaves only D9 Teams. I mean they were D9 until of that D9-being-not-shipped-anymore issue.:(

[CryptiK]

TXDD2048M800HC4DC - my bet is it's these. They go like hell :D

[Oj101]

I was referring to my Team X, this is a topic about them, not Dominators. :)

@OdinEidolon I am rather sure that Xtreem Dark (TXDD2048M800HC4DC-D) which you mentioned in that mini list couldn't have pulled this off since they are ProMOS only. :D
That leaves only D9 Teams. I mean they were D9 until of that D9-being-not-shipped-anymore issue.:(

Correct, as per the title these are D9GMHs :)

EDIT: Would this be the air WR?

[naokaji]

TXDD2048M800HC4DC - my bet is it's these. They go like hell :D

yup those are the good ones (the 667 c3 one where not bad either though) and the older the better, the later ones often require risky voltages to achieve insane clocks.

[CryptiK]

Yeah so I heard, old ones are awesome. My 'new' teams boot at DDR 1350 at 2.22v (real) but I can't load windows. I'm yet to push them harder, as my board is hating D9's and it has some major memory issues. I wish I had my old P5B or P5K still :( I want to know what they'll do.

[CryptiK]

Quick run with my TeamXtreem 8500's at DDR 1100 CAS 4 @ 2.26v real. There's more in them, just testing my new latest bios.

http://i266.photobucket.com/albums/ii265/timbosan/ddr1100cas4226vreal.jpg
http://i266.photobucket.com/albums/ii265/timbosan/ddr1100cas4226vrealspi1M.jpg

[Computerville]

I need to get some answers to this, I don´t want to make a new tread.

Is this correct way to calculate the theoretical maximum bandwidth?
1MHz = 8MB/s (64bit) = 1Hz = 8bit (1Hz = 1/s)
1MHz = 4MB/s (32bit) = 1Hz = 4bit (1Hz = 1/s)
1MHz = 2MB/s (16bit) = 1Hz = 2bit (1Hz = 1/s)
1MHz = 1MB/s (8bit) = 1Hz = 1bit (1Hz = 1/s)

HyperTransport 3.0 (32bit) = 2600MHz (41,6GBit/s)
HT 1000MHz (32bit) = 16.0MB/s = 16GB/s

[fatguy1992]

I was referring to my Team X, this is a topic about them, not Dominators. :)



Sorry, but u quoted me and said "On what RAM", so I thought u were asking me.

[mad_skills]

Nice.:) I quoted you because after i have said that my Team's needed 2.6V for 900MHz 3-3-3-8 you posted a result of your Dominators so i said i was referring to Team not Dom's as this is a topic about Team memory, not Corsair, that's all.:)

[fatguy1992]

Ok, sorry for posting, I didn't know it was Team's only :)

[Oj101]

This topic is about D9GMH, not just Team Group ;)

[CryptiK]

My Teams @ 2.29v real:

http://i266.photobucket.com/albums/ii265/timbosan/ddr1333228vrealeverestcpuz.jpg

[mad_skills]

Nice result dude, can you pull out 1300MHz CL5 ?

[CryptiK]

Me? What do you mean mate?

[natedog420]

Nice result dude, can you pull out 1300MHz CL5 ?

hes at 1333 right now. so hes past your 1300 your saying lol

[OC4/3]

@TS,this set of Xtreem 800 is rated at CL3??
Because AFAIK,CL4 800 Xtreem is lower bin version

[I34z1k]

The set is a handpicked 800c4 kit ;)

When I owned them they did 1200c4 dual 32m @ 2.4v

[OC4/3]

The set is a handpicked 800c4 kit ;)

When I owned them they did 1200c4 dual 32m @ 2.4v

Holy Cow:clap:
That even better then my Xtreem 1066 CL5!
Never thought a low bin Xtreem can do this:rofl:

[I34z1k]

:D specs aren't everything ;)

I want them under Ln2 dude... :D

[I34z1k]

http://valid.x86-secret.com/show_oc.php?id=414654


My latest set @ 2.5v :)

[OC4/3]

http://valid.x86-secret.com/show_oc.php?id=414654


My latest set @ 2.5v :)

Holy cow:clap:
Enough for breaking FSB record i guess:p:

[OdinEidolon]

http://valid.x86-secret.com/show_oc.php?id=414654


My latest set @ 2.5v :)

:shocked:
OCZ 667? what? impressive! what ram was that (link appreciated:p:)?

[I34z1k]

:P They pi @ 735 ;) Validated @ 775, fsb limited now lol.

Orthos @ 700 :D :D :D

Oj0 got 600c3 validated I believe, big ups to the man ;)

I believe he wants this new set of mine too :P


@Odin, the only thing I can reveal is that they are Flexs ;) And have SPD for over 550 I think...

[OdinEidolon]

you mean that they are the flex 1200 version? or that they arent out yet? :confused: (sometimes i dont understand what people say :rofl:)

[Alex-Ro]

Damn super memory,think you can ruin crucial record when you set them on 3.2v and cool them properly :D

[I34z1k]

They're a special set ;)

And nah, mobo limited :( I really don't think it'll reach that high hey... Flourent is amazing lol.

[Oj101]

600MHz C3 (http://valid.x86-secret.com/show_oc.php?id=417271)

End!

[Ket]

Its only CPU-Z verified.. doesn't mean its stable.

[Oj101]

I don't recall stability being a requirement in this thread :rolleyes: It's not stable, but this is 1M stable:

http://i140.photobucket.com/albums/r35/Oj10101/533c3.jpg

[I34z1k]

Its only CPU-Z verified.. doesn't mean its stable.

That's the dumbest thing I've seen for a while. Do us a favor and beat it. Validation is similar to 1m, 32m whatever, it's just the level of stability is far lower so you can get much crazier clocks. You still need some stability.

If you wanna knock, rather just don't post.

[Oj101]

Its only CPU-Z verified.. doesn't mean its stable.

If stability isn't an issue at all, please do better than I did :)

[fatguy1992]

Awesome work :up:

What volts?

Even with 2.5v I can't get 500MHz CL3 :(

[Oj101]

Please don't ask, it hurts :( :D

Lets just say that one's boot voltage is now 2.02v :D

[CryptiK]

These are the correct WR's, right? If anyone knows of any faster ones, can you post them up please?

Single Channel DDR2 WR (836.9 MHz):
http://valid.x86-secret.com/show_oc.php?id=314560

Dual Channel DDR2 WR (814 MHz):
http://valid.x86-secret.com/show_oc.php?id=264797

[fatguy1992]

OMG those are some insane speeds :eek:

[OdinEidolon]

These are the correct WR's, right? If anyone knows of any faster ones, can you post them up please?

Single Channel DDR2 WR (836.9 MHz):
http://valid.x86-secret.com/show_oc.php?id=314560

Dual Channel DDR2 WR (814 MHz):
http://valid.x86-secret.com/show_oc.php?id=264797

tracers? lanfest? What ram is that? that's some "OMGOMG" result! :D

[CryptiK]

Oops I made a mistake, I posted two single channel results. This is the Dual Channel WR:

http://www.xtremesystems.org/forums/showthread.php?t=159942

[fatguy1992]

Still :eek: