The GHzZzzz Chart. [Archive] - XtremeSystems Forums

Bootup05

08-22-2008, 11:34 AM

naokaji

08-22-2008, 11:43 AM

22.46 Ghz from two quads, low clocks though to be able to keep it silent since I sleep right next to them.

Ramaistro

08-22-2008, 11:48 AM

1 x Q6600 @ 3.6 = 14.4
2 x Q6600 @ 2.8 = 22.4
1 x E6600 @ 2.4 = 4.8
1 x P 4 W @ 2.8 = 2.8
1 x 4200x2 @ 2.2 = 4.4

Grand total ======= 48.8

Funny if you count it like this, it is more then i thought.:up:

fart_plume

08-22-2008, 11:51 AM

28.0 ghz for me

Kayin

08-22-2008, 11:53 AM

Only 11 GHz ATM...

David_L6

08-22-2008, 11:54 AM

Only 38.64GHz right now......... Have had more in the past and will again this fall once the temps drop some.

[XC] Hicks121

08-22-2008, 11:56 AM

36.40, should have a little bump in the fall too.

AliG

08-22-2008, 11:58 AM

well the thing is that 2.8ghz p4 is like a 1ghz conroe, that's probably why it seems more than it should. That and probably because we all know not to count ghz that way, but hey now you can go on newegg and report that you have 48.8ghz worth of folding power:p:

SparkyJJO

08-22-2008, 12:04 PM

2.2GHz + 2.2GHz + 1.8GHz = 6.2GHz (fold3, fold5, fold7).

More eventually, hopefully. Fold2 will join up more than likely once I get some stuff redone, so that would be 8GHz after that. Depending on what happens, fold6 might join too, or it might have to dedicate itself to hosting a GPU for FAH. Don't know if I can get both to run on XP or not. If it joins, that would be another 2.5GHz, so 10.5GHz.

The Warlock

08-22-2008, 12:06 PM

1xQ9450 at 3,0Ghz 12Ghz
1xQ9450 at 2,9Ghz 11.6Ghz
1xQ9300 at 2,7Ghz 10,8Ghz
1xQ9300 at 2,5Ghz 10Ghz
1xQ6600 at 2,4Ghz 9,6Ghz
1xE8400 at 3,0Ghz 6Ghz
1xE6750 at 2,7Ghz (soon, 1-2 days) 5,4Ghz
=65,4Ghz (lol), but this is NOT a very good indicator.
Did i mention, these are all run privatly(my home does not need other heating.)LOL
And, you can just reserve a 1st place for DDTung, hehe

Martijn

08-22-2008, 12:11 PM

Active (nearly full-time or 24/7):

Q6600 @ 3.6 -> 14.4
P4 2.26
P4 2.8HT

Part time:
2x P4 2400 -> 4.8
1x P4 630 @ 3.6

Soon:
T9500 -> 5

Totalling:
Active: 19.4
PT: 8.4
Incoming: 5 +
-------------

32.8 :)

Jaco

08-22-2008, 12:18 PM

Q9550 3.88Ghz x4 = 15.52Ghz
X5340 3.33Ghz x8 = 26.64Ghz
E5450 3.40Ghz x8 = 27,2Ghz

total 69.36 Ghz core2 powa

(+24Ghz when I get my E5420 system online)

mcoffey

08-22-2008, 12:20 PM

54.12 right now with another 16 more going online in the next couple days, and another 14.4 in another week. That's 5 big quads and a Duo, so that should do for a while. Just getting this sweet little q9650 snapped in, and she looks like she'll be a good one at 4.25 1.36v. Passed LinPac and Prime, so on the grid she goes for the real test.

8/22/2008 3:12:04 PM||Benchmark results:
8/22/2008 3:12:04 PM|| Number of CPUs: 4
8/22/2008 3:12:04 PM|| 4233 floating point MIPS (Whetstone) per CPU
8/22/2008 3:12:04 PM|| 12409 integer MIPS (Dhrystone) per CPU

:D

andyc

NaeKuh

08-22-2008, 12:21 PM

systems arent all up.

But they will soon. Need to find time.

Most likely twins will go up next month to see how they compare to dave's octopussy. :rofl:

But in addition to what i have on sig:

i have 2 more yorkfields clocked at 3.7 and 3.9

1 kentsfield @ 3.7 <--- ignoring her tho, im retiring my kents as we speak.

4.25 x 4 = 17
4.05 x 12 = 48.6
3.7 x 4 = 14.8
3.9 x 4 = 15.6

= 96ghz. Yorkfield class.

:T

OH i forgot my Sammy. How could i forget that little baby.
thats another 8gigz for her. :rofl:

So total is 104ghz. Should i go full live.

64dragon

08-22-2008, 12:26 PM

4.9ghz :( no farm here, just a single plant

you mis-typed naokaji's amount, you missed a 2

loonym

08-22-2008, 12:26 PM

3-q6600@3.6
1-x3360@3.9
1-e8400@4.2

adding 1 more x3360@3.9 this weekend, xfx just sent me a preprogrammed bios chip for the 790i I corrupted. I'm way too lazy to figure out how much that is :D

Bootup05

08-22-2008, 12:43 PM

:eek: Wow you guys are fast, I only went away for half an hour to watch TV :p:

*Goes to edit teh ranks*

PS: My SE7520BB2 Has been shipped :D

s0lid

08-22-2008, 12:52 PM

DDTUNG is gonna pwn u all in this :rofl:
When i counted the his comps GHzs they were aroud half THz....

Edit:
http://www.xtremesystems.org/forums/showpost.php?p=2990567&postcount=13

45 x quad @ 3.6ghz = 648Ghz
24 x p4 3ghz = 72GHz
24 x dc athlons (2ghz as ref) = 96GHz
only this makes: 816GHz!

And more because there is no DP Xeons or C2Ds counted in :rofl:

mcoffey

08-22-2008, 01:02 PM

systems arent all up.

But they will soon. Need to find time.

Most likely twins will go up next month to see how they compare to dave's octopussy. :rofl:

But in addition to what i have on sig:

i have 2 more yorkfields clocked at 3.7 and 3.9

1 kentsfield @ 3.7 <--- ignoring her tho, im retiring my kents as we speak.

4.25 x 4 = 17
4.05 x 12 = 48.6
3.7 x 4 = 14.8
3.9 x 4 = 15.6

= 96ghz. Yorkfield class.

:T

OH i forgot my Sammy. How could i forget that little baby.
thats another 8gigz for her. :rofl:

So total is 104ghz. Should i go full live.

Dude,

was up with that. Doesn't look like anything's crunching, must be a mistake.

Naekuh Hidden 1,008 99,818 0 0 0 0 0 0 0 725,359 0.00

Doesn't look like you've put out anything in a while, so I know that can't be right:shrug: Somehow your stats aren't getting credit. Or did you start crunching by another name?

andyc

Bootup05

08-22-2008, 01:07 PM

Ranks will be updated in a about 15mins, Just installing Excell, Notepad is driving me up the wall:shakes:

NaeKuh

08-22-2008, 01:26 PM

Dude,

Doesn't look like you've put out anything in a while, so I know that can't be right:shrug: Somehow your stats aren't getting credit. Or did you start crunching by another name?

andyc

only 2 out of the listed rigs were up.

and they were crunching for hicks.

sammy is still on hicks. Main is in about scattered in parts right now for rebuild today and tomorrow.

But yeah i said at start, not up yet.

Im waiting for the big show down with dave vs victor b4 i go full production.
Also AT might throw a competition and i was asked by a friend to go heads up against him there.

mcoffey

08-22-2008, 01:29 PM

only 2 out of the listed rigs were up.

and they were crunching for hicks.

sammy is still on hicks. Main is in about scattered in parts right now for rebuild today and tomorrow.

But yeah i said at start, not up yet.

OK cool, for a minute there I thought they were screwing you over on credits.

andyc

loonym

08-22-2008, 01:40 PM

Im waiting for the big show down with dave vs victor b4 i go full production.
You may as well quit waiting because that contest isn't happening. Let's get those big quads on the grid. :D

mcoffey

08-22-2008, 01:45 PM

Oh man, EVGA 790i FTW MB just got here. Just what I needed for the qx9650's new home:D I might just get that bad boy online tonight. You know, somebody's got to make up for Neakuh:D

andyc

Bootup05

08-22-2008, 02:16 PM

Seing as this thread has gone OT, (that didn't take long)

I'd like to show you this :)

http://img379.imageshack.us/img379/3262/sseye2.jpg (http://imageshack.us)

People with no air con might like!

This is on AIR with a Freezer 7 Pro @ 1.53v in BIOS ;)

Idles @ 21c @ 1.53v :D:D

Ambient @ 22c right now

jcool

08-22-2008, 02:21 PM

Dual E5420's --> 8*3225Mhz = 25,8Ghz
Q6600 --> 4*4107Mhz = 16,4Ghz
E8400 --> 2*4000Mhz = 8Ghz
T2400 --> 2*1833Mhz = 3,7Ghz
P-M 705 --> 1*1833Mhz = 1,8Ghz

--> 55,7Ghz total

Got more but left them out because the rest doesn't crunch regularly (like the X2 etc). :)

SiGfever

08-22-2008, 02:51 PM

2 x Q6600 @ 3.6 = 28.8
1 x Q9550 @ 3.51 = 14.04
1 x E8500 @ 4.05 = 8.1

= 50.94Ghz

naokaji

08-22-2008, 03:06 PM

This is on AIR with a Freezer 7 Pro @ 1.53v in BIOS ;)

nice, but how much does the smaller cache of the E2x00s cost in points per day?
trying to figure out if it would be worth it to find some scrap parts to turn the 2180 I have lying around in a headless crunchy.

oh and sorry for taking it even further offtopic.

Kristall-99

08-22-2008, 03:13 PM

q6600 at 3.6 - 14.4
4000+ @ 2.8 - 2.8
4000+ 2.4
lappy? dont know if it qualifies but ill add it -2.2

so that'll be uhh... 21.8 for muah

64dragon

08-22-2008, 03:42 PM

4.9ghz :( no farm here, just a single plant

Bootup05, you forgot to add my 4.9 to the list, and i may be changing to 5.0...if it stays happy with current vcore otherwise i'm dropping back down

Bootup05

08-22-2008, 03:44 PM

Bootup05, you forgot to add my 4.9 to the list, and i may be changing to 5.0...if it stays happy with current vcore otherwise i'm dropping back down

Ahh, sorry mate I must have c0cked that up whislt shifting to spreadsheet!

I'll get that sorted out now :)

Want 4.9 or 5 ? :p:

Movieman

08-22-2008, 03:46 PM

Ahh, sorry mate I must have c0cked that up whislt shifting to spreadsheet!

I'll get that sorted out now :)

Want 4.9 or 5 ? :p:

Give him 5...:up:

Bootup05

08-22-2008, 03:47 PM

Job done ;)

Bobsama

08-22-2008, 04:04 PM

900mhz celeron m 353. If I can figure out how to sling work units to a disconnected e2140 @ 3.2ghz, then I could say 6.4ghz total. Anyone willing to help? If not, it'll be on the grid in about 2 weeks (I guess... xP).

64dragon

08-22-2008, 04:22 PM

Job done ;)

thanks :up:

managed to pass 32m spi and just started Boinc up so we'll see how she does. my m2n sli deluxe has crazy overvolt, i'm set at 1.3625 in bios but the hardware manager in bios shows 1.41 and in OS its 1.425 on a multimeter. i've never run vcore this high before and i'm on air but temps under 44C at load

[XC] mysticmerlin

08-22-2008, 05:03 PM

Under mysticmerlin I have (More soon see sig)
iMac C2D 2x1.8 = 3.6
P4 2.4
x2 4000+ 2.1 = 4.2
AM2 4000 2x 2.1 = 4.2
AMD 3800+ 2.4
Tbird 1.2
2xQ6600 2.4x8 = 19.2
--------------------
37.2

Under tomashcraft (helping a brother out)
E8400 2x 3.0 = 6
MacBook Pro 2x 2.16 = 4.32
----------------------
10.32

Under the clan still (no access to move over)
P4 2.0
P4 1.7
-------
3.7

Grand total 51.22 so far with a Q6600 and a P4 2.4 for sure on soon.

[XC] 4X4N

08-22-2008, 05:15 PM

2-Q6600@3.6=28.8
1-Q6600@3.5=14
1-Q6600@3.4=13.6
1-Q9650@4.0=16
1-E6300@3.3=6.6
Total = 79

Movieman

08-22-2008, 05:17 PM

naekuh and mc coffey;
We crapped the hell out of this thread.
I'll clean it up and get this back to what it was supposed to be.

fart_plume

08-22-2008, 05:21 PM

ahhh, leave it Dave, we want to make him feel welcome...............I mean we crap on everyone's threads:rofl:

Movieman

08-22-2008, 05:27 PM

cleaned..
Like I'll clean his oops...:rolleyes:
OK, back to our regularly scheduled off topic topics..:rofl:

littleowl

08-22-2008, 05:38 PM

x2 4400 @2.3
2x Q6600 @2.4
E6600 @2.4
P4 @2.8
P4 @1.8
P4 @2.0
P4 @1.8?
P4 @2.0
______________________________
Total 19.9
does that sound right?

one Q6600 is on TomAshcraft to get him moved up some. :up:

mcoffey

08-22-2008, 05:46 PM

cleaned..
Like I'll clean his oops...:rolleyes:
OK, back to our regularly scheduled off topic topics..:rofl:

yeah, your right, got carried away, sorry.

andyc

[XC] mysticmerlin

08-22-2008, 06:11 PM

x2 4400 @2.3
2x Q6600 @2.4
E6600 @2.4
P4 @2.8
P4 @1.8
P4 @2.0
P4 @1.8?
P4 @2.0
______________________________
Total 19.9
does that sound right?

one Q6600 is on TomAshcraft to get him moved up some. :up:

That would be 39.0 Ghz total

littleowl

08-22-2008, 06:24 PM

mysticmerlin;3238988']That would be 39.0 Ghz total

nah the L2 will only let each of the cores on the quad to run at 2.4 going out of the chip so the hole chip is 2.4 :)

just a noob

08-22-2008, 06:44 PM

i've only got 3ghz on a single p4 currently, but if i can get the school to go along with it, i can probably get 125ghz+ of power all in p4's lol

loonym

08-22-2008, 06:48 PM

nah the L2 will only let each of the cores on the quad to run at 2.4 going out of the chip so the hole chip is 2.4 :)ummmm... 2 quads at 2.4= 8 cores at 2.4 each= ummmm... well it equals something more than 2.4

littleowl

08-22-2008, 07:11 PM

ummmm... 2 quads at 2.4= 8 cores at 2.4 each= ummmm... well it equals something more than 2.4

yes and no :)

Hello Charlie,

Thank you for contacting Intel(R) Customer Support.

I understand that you want to comprehend what the Intel(R) Dual Core(TM) technology and Quad Core(TM) is.

Dual Core(TM) and Quad Core(TM) is a technology that, nowadays, several processors have. It is all about having two or four execution cores that would optimize multi-threaded applications and multitasking. There is a wide variety on Dual Core(TM) processors like the Intel(R) Pentium(R) Processor Extreme Edition, Intel(R) Pentium(R) D processors, Intel(R) Pentium(R) Dual-Core desktop processor, Intel(R) Pentium(R) Dual-Core mobile processor, Intel(R) Core(TM) Duo processors, Intel(R) Core(TM) 2 Duo processor, Intel(R) Core(TM) 2 Duo mobile processor, Intel(R) Core(TM) 2 Extreme processors, Intel(R) Core(TM) 2 Quad processor, Intel(R) Xeon(R) processors and the Intel(R) Itanium(R) Processors.

Intel(R) Dual Core(TM) and Quad Core(TM) Technology means that if the speed of the processor is 2.4GHz, each core would be running at that speed but it does not mean that the processor is running at 4.8GHz or 9.6 GHz for the case of Quad Core(TM) processors, because all cores share the same L2 cache and front side bus. When a set of instructions is coming through the processor the MCH (Memory Controller Hub) of the motherboard would assign the instruction to a particular core, making the system run two or four different tasks at the same time.

after reading this email I want an extreme chip so BAD I can tast it LOL

KaptainBlaZzed

08-22-2008, 07:26 PM

Not on the Grid, currently running DPAD.

2.84 x 8 = 22.72
3.68 x 4 = 14.72
3.55 x 4 = 14.2

51.64GHz

loonym

08-22-2008, 07:37 PM

yes and no :)ok, understood but I also understand that if I disable 3 cores on each quad I run, I'm only going to have 25% of my current production. 4 cores is 4x the WCG processing power regardless of the L2.

littleowl

08-22-2008, 07:48 PM

ok, understood but I also understand that if I disable 3 cores on each quad I run, I'm only going to have 25% of my current production. 4 cores is 4x the WCG processing power regardless of the L2.

very true. but no mater what, you are still only going to get 2.4ghz from that chip unless you OC and that is different conversation. :D

I found that info very interesting.

D_A

08-22-2008, 08:36 PM

All this discussion is conjecture at best. For the purposes of consistency I suggest the original poster nominate whether the total should be counted as GHz per SYSTEM, per CHIP or per CORE. Right, wrong or indifferent; at least everyone will be working to the same standard.

SparkyJJO

08-22-2008, 08:49 PM

All this discussion is conjecture at best. For the purposes of consistency I suggest the original poster nominate whether the total should be counted as GHz per SYSTEM, per CHIP or per CORE. Right, wrong or indifferent; at least everyone will be working to the same standard.

In other words... so we can all be wrong together! http://i58.photobucket.com/albums/g270/SparkyJJO/smileys/gr_jest.gif
http://i58.photobucket.com/albums/g270/SparkyJJO/smileys/nothingtoadd.gif

littleowl

08-22-2008, 09:03 PM

All this discussion is conjecture at best. For the purposes of consistency I suggest the original poster nominate whether the total should be counted as GHz per SYSTEM, per CHIP or per CORE. Right, wrong or indifferent; at least everyone will be working to the same standard.

this made me LOL! It don't matter to me I just added each chip not each core :rofl:

Its all good either way!!!! :p:

STEvil

08-22-2008, 09:04 PM

2x E5450 @ 3600 1.2v for now.

28.8ghz

Bootup05

08-23-2008, 12:51 AM

*Gets up*

Morning all!

Don't worry about the spam I enjoyed it :p: Does that sound bad?:rofl:

Updated the ranks.

Oh, and it would be good if we could all post, Ghz to Core, so Q6600 = 9.6GHz.

I know it sounds wrong, but like previously said, WCG takes each core so we will too :)

fallwind

08-23-2008, 01:07 AM

158.4GHz if I coun't each core of my dozen quads! :D

littleowl

08-23-2008, 01:26 AM

158.4GHz if I coun't each core of my dozen quads! :D

OH QFT!!!!!!

:rofl:

123bob

08-23-2008, 01:36 AM

155.08Gig from 13 quads.

I realized from this exercise that I have two machines running STOCK and a couple that are under clocked......:eek: I have been negligent in my duties and I should be beaten severely.....:slapass::horse::slash::cord::nono:

This occurred from not paying enough attention over the last three months. I handled several disasters on the farm by just taking care of the immediate emergency and saying "I'll clock up later". Well, with Fallwind sneaking past me, (Congrats Fallwind!!:up:) it's time to pay attention again.....

Where's my Nehalems???? Time for this farm to shift some gears....

Bob

Movieman

08-23-2008, 09:40 AM

155.08Gig from 13 quads.

I realized from this exercise that I have two machines running STOCK and a couple that are under clocked......:eek: I have been negligent in my duties and I should be beaten severely.....:slapass::horse::slash::cord::nono:

This occurred from not paying enough attention over the last three months. I handled several disasters on the farm by just taking care of the immediate emergency and saying "I'll clock up later". Well, with Fallwind sneaking past me, (Congrats Fallwind!!:up:) it's time to pay attention again.....

Where's my Nehalems???? Time for this farm to shift some gears....

Bob

Soon, I'm looking for you!;)

illidan

08-23-2008, 09:50 AM

mine dual core @ 3.2GHz = 6.4GHz

q9550 soon :D

NaeKuh

08-23-2008, 10:57 AM

155.08Gig from 13 quads.
Bob

oh and this is the guy that i was talking about that spanked me hardcore each time i tried to race him.

:up:

bob and fallwind you guys are truely scary next to ddtung! :up:

Soon, I'm looking for you!;)

:wasntme:

[XC] serlv

08-23-2008, 11:12 AM

34.92 Ghz of crunching cores, spread over the machines in this room. Haven't made it out of my bedroom, yet, to make coffee, but was able to count the crunching power of the rigs in here.

+ 88,496 Ghz in the "front of the house" computers, so 123,416 Ghz.
Now I just need to figure out the 2nd bedroom and the computer room's output and add that in.

----------------
Now playing: CARLOS~C (http://www.foxytunes.com/artist/-/track/carlos~c)
via FoxyTunes (http://www.foxytunes.com/signatunes/)

phelan1777

08-23-2008, 12:03 PM

Lets see.........currently running

QX6700 @ 3.2X4
X6800 @ 3.8X2

In route a x3370 OC = GHZ yet to be determined.

on reserve
E4300 @ 1.8 Stock, have hit 2.5GHzX2 stable.
E8400 @ 3.0 stock, and yet to find stable, but have hit 4.01GHz

Bootup05

08-23-2008, 12:09 PM

In route a 3370 GHZ yet to be determined.

Eh?! :shocked: What the hell is that meant to be lol :shock2: Ummm....

:D

[XC] serlv

08-23-2008, 12:12 PM

Eh?! :shocked: What the hell is that meant to be :wth: Ummm....

:D

He forgot a ,

10x Quad? Run it at 10 x 440... ( time 4, for purposes of this thread )

phelan1777

08-23-2008, 12:14 PM

Edited post, mean a single chip, though a Qcore, and have yet to see what its stable OC is.

Bootup05

08-23-2008, 12:24 PM

Updated.

Thanks for editing ;)

I had no idea what that was meant to be :D Could have been an Xeon, 10 X Randomly clocked quads, or something else that I cant think of :)

Serlv thanks for confusing me even further:p: I know you didn't mean to!

But how did you get 10 Quads to be 37.7GHz :confused:

And whats the 10 x 440 about, I assume its FSB but :shrug: :stick:

Or is it a Quad with a 10x Multi, 10 x 440 4.4GHz. ! *BAFFLED*

64dragon

08-23-2008, 12:56 PM

Updated.

Thanks for editing ;)

I had no idea what that was meant to be :D Could have been an Xeon, 10 X Randomly clocked quads, or something else that I cant think of :)

Serlv thanks for confusing me even further:p: I know you didn't mean to!

But how did you get 10 Quads to be 37.7GHz :confused:

And whats the 10 x 440 about, I assume its FSB but :shrug: :stick:

Or is it a Quad with a 10x Multi, 10 x 440 4.4GHz. ! *BAFFLED*

Serlv's first line was in response to you that phelan forgot a ",". His 2nd line imo, was suggesting that the multi on phelan's 3370 was 10 and thinks that it can clock to 440 fsb

phelan1777

08-23-2008, 01:03 PM

I caught wind that it could get up to 470ish @ 9

NaeKuh

08-23-2008, 01:11 PM

LOL..

X3370, should do at least 4.0 or possibly higher.

oh dragon should have something coming to him soon too. :wasntme:

v0dka

08-23-2008, 01:12 PM

32.56Ghz for now, sometimes there's one dualcore extra and one E7200 has not been overclocked since I just got it.

Bootup05

08-23-2008, 01:24 PM

nice, but how much does the smaller cache of the E2x00s cost in points per day?
trying to figure out if it would be worth it to find some scrap parts to turn the 2180 I have lying around in a headless crunchy.

oh and sorry for taking it even further offtopic.

I had a look at my Points coming in today, was too random to make out any differences, so here are the benchmarks.

E1200 2.6GHz 1MB L2

23/08/2008 21:20:05||Benchmark results:
23/08/2008 21:20:05|| Number of CPUs: 2
23/08/2008 21:20:05|| 2557 floating point MIPS (Whetstone) per CPU
23/08/2008 21:20:05|| 5802 integer MIPS (Dhrystone) per CPU

E6400 2.8GHz 2MB L2

23/08/2008 21:19:52||Benchmark results:
23/08/2008 21:19:52|| Number of CPUs: 2
23/08/2008 21:19:52|| 2756 floating point MIPS (Whetstone) per CPU
23/08/2008 21:19:52|| 6125 integer MIPS (Dhrystone) per CPU

E2200 3.3GHz 1MB L2

23/08/2008 21:19:26||Benchmark results:
23/08/2008 21:19:26|| Number of CPUs: 2
23/08/2008 21:19:26|| 3097 floating point MIPS (Whetstone) per CPU
23/08/2008 21:19:26|| 8467 integer MIPS (Dhrystone) per CPU

Also did the T2130

T2130 1.86Ghz 1MB L2

23/08/2008 21:25:52||Benchmark results:
23/08/2008 21:25:52|| Number of CPUs: 2
23/08/2008 21:25:52|| 1701 floating point MIPS (Whetstone) per CPU
23/08/2008 21:25:52|| 3445 integer MIPS (Dhrystone) per CPU

Cache - No Impact ;) (According to these results)

WesM63

08-23-2008, 04:09 PM

x3370 (4cores) @ 4ghz - 16ghz
C2D e8600 (2cores) @ 4.5ghz -9ghz
C2D e4300 (2cores) @ 1.8ghz - 3.6ghz
Sammy 1 (4cores) @ 1.67gz - 6.68ghz
Sammy 2 (4cores) @ 1.67ghz - 6.68ghz
P4 (1core) @ 2.4ghz - 2.4ghz
Dual Xeon (2cores/2HT) @ 1.6ghz - 3.2ghz

Total Power: 47.56ghz

Movieman

08-23-2008, 04:19 PM

Damn, I forgot to add mine here with all the BS going back and forth last night:rofl:
Da Quad@3600=......14,400mhz
Sammy@1995mhz= 7,980mhz
2- clovers@3000mhz=48,000mhz
Harry Harpertown@3404mhz=27,232mhz
Total: 97.6GHz

Coming soon:
Chipzilla@ God only knows????:rofl:

Blaaammmm

08-23-2008, 05:04 PM

Laptop: 1.87 x 2 = 3.74
Quader: 3.6 x 4 = 14.4
Old P.O.S: 3.0 x 1 = 3.0

Total: 21.14

Damn... Such a low number compared to your home crunching farms :p:

phelan1777

08-23-2008, 05:07 PM

Laptop: 1.87 x 2 = 3.74
Quader: 3.6 x 4 = 14.4
Old P.O.S: 3.0 x 1 = 3.0

Total: 21.14

Damn... Such a low number compared to your home crunching farms :p:

Its not the amount of GHz you have crunching, its a matter of having at least some MHz crunching, most of the "holds up pinky" e-peni here is just for bragging rights.:D:ROTF::rofl:

<hides from Dave

loonym

08-23-2008, 05:48 PM

Laptop: 1.87 x 2 = 3.74
Quader: 3.6 x 4 = 14.4
Old P.O.S: 3.0 x 1 = 3.0

Total: 21.14

Damn... Such a low number compared to your home crunching farms :p:
s'ok... stick with it and you can have a farm and be broker than broke too :D

NaeKuh

08-23-2008, 07:15 PM

Coming soon:
Chipzilla@ God only knows????:rofl:

you mean octopussy!

123bob

08-24-2008, 09:49 AM

Laptop: 1.87 x 2 = 3.74
Quader: 3.6 x 4 = 14.4
Old P.O.S: 3.0 x 1 = 3.0

Total: 21.14

Damn... Such a low number compared to your home crunching farms :p:

There is no such thing as a low number. If you're crunching, you're good. The key is to keep crunching. This is tortoise (or turtle, if you're Frisch..:)) and the hare type of thing. You'd be surprised at how you can catch folks by just crunching 24/7. That is why we clock for 24/7 full load. We want stable machines that don't have to be nursed into crunching.

Another thought....We never know whose machine will crunch the golden work units. It may come from MM's clover, a P4, or even a P3 type machine. We work with what we have.

I started with a P4 Northwood. That particular chip was passed on, and as far as I know, it's still crunching. I caught quad fever after that and the rest is history, just like my bank account.....:rofl:

Now, unto the clocking. I casually re-clocked my two stock slackers to get closer to Fallwind's number. I'm at 158.60 Gig right now. I'll run like that for a bit to see how we stack up. Fallwind reported that he runs 12 quads, I run 13, so it should be interesting to see how the numbers come out. Fallwind clocks better than I do, so we can see the effect an "extra" 4 cores has, versus his clocks.

Regards,
Bob

phelan1777

08-24-2008, 10:21 AM

There is no such thing as a low number. If you're crunching, you're good. The key is to keep crunching. This is tortoise (or turtle, if you're Frisch..:)) and the hare type of thing. You'd be surprised at how you can catch folks by just crunching 24/7. That is why we clock for 24/7 full load. We want stable machines that don't have to be nursed into crunching.

Another thought....We never know whose machine will crunch the golden work units. It may come from MM's clover, a P4, or even a P3 type machine. We work with what we have.

I started with a P4 Northwood. That particular chip was passed on, and as far as I know, it's still crunching. I caught quad fever after that and the rest is history, just like my bank account.....:rofl:

Now, unto the clocking. I casually re-clocked my two stock slackers to get closer to Fallwind's number. I'm at 158.60 Gig right now. I'll run like that for a bit to see how we stack up. Fallwind reported that he runs 12 quads, I run 13, so it should be interesting to see how the numbers come out. Fallwind clocks better than I do, so we can see the effect an "extra" 4 cores has, versus his clocks.

Regards,
Bob

To me, any who, the Golden cruncher is the one or many that go 24/7/365. No if and or buts, be it a farm or single chip. IT it is a mad OC chip.......that is just a polish in its already shiny numbers.

Movieman

08-24-2008, 10:26 AM

To me, any who, the Golden cruncher is the one or many that go 24/7/365. No if and or buts, be it a farm or single chip. IT it is a mad OC chip.......that is just a polish in its already shiny numbers.

I look to find what is that magic number that I can run my systems at where they run at a reasonable temp, never produce errors and don't need downtime.
Like the "tortuise and the hare" scenario.
I may run a little bit lower speed than others but I don't lose any time replacing overstressed parts and in the end I think thats the better approach.

Martijn

08-24-2008, 10:38 AM

There is no such thing as a low number. If you're crunching, you're good. The key is to keep crunching. This is tortoise (or turtle, if you're Frisch..:)) and the hare type of thing. You'd be surprised at how you can catch folks by just crunching 24/7. That is why we clock for 24/7 full load. We want stable machines that don't have to be nursed into crunching.

Another thought....We never know whose machine will crunch the golden work units. It may come from MM's clover, a P4, or even a P3 type machine. We work with what we have.

I started with a P4 Northwood. That particular chip was passed on, and as far as I know, it's still crunching. I caught quad fever after that and the rest is history, just like my bank account.....:rofl:

It is! :D (uptime: 61 days, 23 hours, 21 minutes on Server 2k3)

[XC] Angstrom

08-24-2008, 11:01 AM

2.33 GHz * 160 = 372.8 GHz

Running OSG via National LambdaRail.
The batch-job system is also working on integrating BOINC as a backfill system, as soon as it releases i'm going WCG.

http://uscms1.fltech-grid3.fit.edu/ganglia/

phelan1777

08-24-2008, 12:00 PM

Anyone want to guesstimate want DD's total GHz is?

Bootup05

08-24-2008, 12:01 PM

1THz +

lol

skinnee

08-24-2008, 12:05 PM

1xQ9450@2.66 = 10.64
2xE5110@1.6 = 6.4
2xE5110@1.6 = 6.4
1xE5110@1.6 = 3.2
2xPIII@1.0 = 2.0
1xP4640@3.2 = 3.2
1xP4620@ 3.0 = 3.0

34.84 GHz for me...with more in the works.

Movieman

08-24-2008, 12:08 PM

1THz +

lol

Probably a very good estimate from what I can guess of his farm from his comments.:up:

phelan1777

08-24-2008, 12:44 PM

Probably a very good estimate from what I can guess of his farm from his comments.:up:

He is up to like........what 44-45 CPus last I remember.

@ 4 cores per @ 3.2-4ghz?

64dragon

08-24-2008, 12:46 PM

1xQ9450@2.66 = 10.64
2xE5110@1.6 = 6.4
2xE5110@1.6 = 6.4
1xE5110@1.6 = 3.2
2xPIII@1.0 = 2.0
1xP4640@3.2 = 3.2
1xP4620@ 3.0 = 3.0

34.84 GHz for me...with more in the works.

so thats how your hitting benchmarks so quick :idea:

jcool

08-24-2008, 01:05 PM

He is up to like........what 44-45 CPus last I remember.

Naw... I've seen him post that Quad #50 is up and running, and that was a while ago.
Plus, there are his other machines as well :D :shocked: :up:

WhiteFireDragon

08-24-2008, 01:16 PM

i'm a n00b. only 18.4ghz from 2 chips

q6600 @ 3.0ghz
e2180 @ 3.2ghz

Bootup05

08-24-2008, 01:27 PM

Updated ;)

Dylock

08-24-2008, 01:35 PM

114Ghz from 20 Dual cores & 2 Quads

Movieman

08-24-2008, 01:40 PM

114Ghz from 20 Dual cores & 2 Quads

Haven't see you post here in WCG before..
Welcome!
What is your user name on the team?
Thanks for helping.:up:

skinnee

08-24-2008, 01:41 PM

so thats how your hitting benchmarks so quick :idea:

:yepp:

Like I stated previously, my goal is to contribute 100k BOINC points a month.

twilyth

08-24-2008, 01:58 PM

Can I include other gadgets around the house or is it just for things running boinc? Because I'm pretty sure my car has 3 or 4 onboard computers, then there are the DVRs, microwave, thermostat, etc. Plus the cats have about 5 billion neurons each which are running at 60hz, so that's 300ghz x 2. We won't count the mice since they're transient and I won't count myself and the gf since we're still trying to find a service pack that will work on the Abby Normal OS. :rofl: :D

Dylock

08-24-2008, 02:02 PM

Haven't see you post here in WCG before..
Welcome!
What is your user name on the team?
Thanks for helping.:up:

:slap: Sorry you can remove my name I didn't realise it was for this team only i wondered here after looking at your profile :shakes:

phelan1777

08-24-2008, 02:07 PM

:slap: Sorry you can remove my name I didn't realise it was for this team only i wondered here after looking at your profile :shakes:

Well if you are crunching for the team with that many GHz your name would be up there :P.

Dylock

08-24-2008, 02:09 PM

Well if you are crunching for the team with that many GHz your name would be up there :P.

Well that's the problem I wondered here not realizing it was a team specific forum then "saw how many Ghz you have folding?" , not realising it was only for one team's members . I'm foldingfor HardOcp

Movieman

08-24-2008, 02:11 PM

Well that's the problem I wondered here not realizing it was a team specific forum then "saw how many Ghz you have folding?" , not realising it was only for one team's members . I'm crunching for HardOcp

Not a problem. Your doing the work and thats what matters..:up:
HardOcp?? Who's that? :sofa: (joke)

Dylock

08-24-2008, 02:13 PM

Not a problem. Your doing the work and thats what matters..:up:
HardOcp?? Who's that? :sofa: (joke)

I had a mis-type i meant folding not crunching sorry my mind is fhdjkscn atm :)

Movieman

08-24-2008, 02:14 PM

I had a mis-type i meant folding not crunching sorry my mind is fhdjkscn atm :)

Folding is good too..:up:

SiGfever

08-24-2008, 02:47 PM

I had a mis-type i meant folding not crunching sorry my mind is fhdjkscn atm :)
:welcome:

If you consider joining our team we will be here. :up:

phelan1777

08-24-2008, 03:50 PM

Well that's the problem I wondered here not realizing it was a team specific forum then "saw how many Ghz you have folding?" , not realising it was only for one team's members . I'm foldingfor HardOcp

Ehh no one is perfect, we all make mistakes :P.:D

[XC] mysticmerlin

08-24-2008, 04:26 PM

I'm foldingfor HardOcp

We all make mistakes, Luckey for you this is a easy to fix one. Join us :D

Welcome to XS anyway's :welcome:

123bob

08-24-2008, 05:32 PM

It is! :D (uptime: 61 days, 23 hours, 21 minutes on Server 2k3)

Martijn, Good to hear that northy is still cranking away. :up: That chip will never fail you.

Bootup, I'm at 158.6 gig now. I'm comparing how my 13 quads stack up against Fallwind's 12, with his better clocks. (Someday, I'll learn how to clock.....:D)

Regards,
Bob

skinnee

08-24-2008, 05:47 PM

Correction for me...just added a dual E5310, line-up is as follows.

1xQ9450@2.66 = 10.64
2xE5310@1.6 = 12.8
2xE5110@1.6 = 6.4
2xE5110@1.6 = 6.4
1xE5110@1.6 = 3.2
2xPIII@1.0 = 2.0
1xP4640@3.2 = 3.2
1xP4620@ 3.0 = 3.0

34.84 is now 47.64GHz

Movieman

08-24-2008, 06:00 PM

Correction for me...just added a dual E5310, line-up is as follows.

1xQ9450@2.66 = 10.64
2xE5310@1.6 = 12.8
2xE5110@1.6 = 6.4
2xE5110@1.6 = 6.4
1xE5110@1.6 = 3.2
2xPIII@1.0 = 2.0
1xP4640@3.2 = 3.2
1xP4620@ 3.0 = 3.0

34.84 is now 47.64GHz

Those 5110's and 5310's are dualies right?
There's a nice BSEL mod for them if your interested..:up:

[XC] riptide

08-24-2008, 06:05 PM

Well that's the problem I wondered here not realizing it was a team specific forum then "saw how many Ghz you have folding?" , not realising it was only for one team's members . I'm foldingfor HardOcp

WTF? I've got a 2 step fix for that....

1) Open up your hosts file and put in this entry..

127.0.0.1 www.hardforum.com

2) Then open up your folding clients and change team to 36362 or run WCG with us.

:up::D

phelan1777

08-24-2008, 07:20 PM

im anxious go get my hands on that 3370..........

<bites nails in anticipation.

skinnee

08-24-2008, 08:48 PM

Those 5110's and 5310's are dualies right?
There's a nice BSEL mod for them if your interested..:up:

The 5110's are dualies, but the 5310's are quads. Of course I'm interested, but you think I can pull off a BSEL mod on Dell PowerEdge's? :D

mcoffey

08-24-2008, 08:48 PM

im anxious go get my hands on that 3370..........

<bites nails in anticipation.

They're awesome chips, couldn't happier with my 9650,

andyc

Movieman

08-24-2008, 08:52 PM

The 5110's are dualies, but the 5310's are quads. Of course I'm interested, but you think I can pull off a BSEL mod on Dell PowerEdge's? :D

yes:up:

skinnee

08-24-2008, 08:59 PM

Then hook me up Dave!!!

WesM63

08-25-2008, 06:51 AM

updated mine, forgot parents machine.

Slay0r

08-25-2008, 07:14 AM

34.27 GHz between 16 machines

Deadeye550

08-25-2008, 07:24 AM

3.2 ghz Q6600

Bootup05

08-25-2008, 08:13 AM

Updated

Jaco

08-25-2008, 08:16 AM

Update :

Q9550 3.884 x4 = 15.536
E5450 3.404 x8 = 27.232
X5340 3.330 x8 = 26.640
E5420 2.925 x8 = 23.4

Total 92.8 Ghz

Deadeye550

08-25-2008, 02:21 PM

I think you need to list DDT as a bazillion or something, I bet he's somewhere around there.

Wesley

Naja002

08-25-2008, 04:15 PM

42.84 :up:

Movieman

08-25-2008, 04:18 PM

Then hook me up Dave!!!

PM me your email addy

just a noob

08-25-2008, 04:21 PM

38th place :woot:

phelan1777

08-25-2008, 04:49 PM

Update X3370 @ 3.6ghz X 4 for now.

Now if I went straight from stock to 3.6 with my QX6700 it would :banana::banana::banana::banana::banana: a fit from the time I hit F10.........

I am liking this chip already.

yeah I know its not 4.0GHz+, but will hopfully come later.

[XC] ruane

08-26-2008, 05:37 AM

Maybe a little late...

Q6600 @ 3.6 = 14.4
T5500 @ 1.6 = 3.2
E2200 @ 2.2 = 4.4
E6600 @ 3.2 = 6.4
Dothan 750 @ 1.8
Pentium 3 @ 1.0
XServe G5 @ 2.0 = 4.0
Athlol X2 3800 @ 2.4 = 4.8
Pentium 4m @ 1.7
Pentium 4 @ 2.4

Total = 45.1GHz

Slay0r

08-26-2008, 06:17 AM

34.27 GHz between 16 machines

Oer, I didn't add up the frequency of every core, most of the machines are duals and 4 of them are quads.. so err, the actual number is somewhere inbetween double of 34 GHz. say 70GHz orso. I will add them up properly soon enough

HanmoLi

08-26-2008, 11:07 AM

Core2Quad Q9300 = 3.35*4 = 13.4
Phenom 9850 = 2.6*4 = 10.4
Athlon64 X2 5000+ = 3.05*2 = 6.1

Total = 13.4 + 10.4 + 6.1 = 29.9Ghz

Bootup05

08-26-2008, 02:35 PM

Updated :yepp:

Oer, I didn't add up the frequency of every core, most of the machines are duals and 4 of them are quads.. so err, the actual number is somewhere inbetween double of 34 GHz. say 70GHz orso. I will add them up properly soon enough

So 68GHz.

Plus you said 4 Quads.

Il assume their at 3GHz each. They were already included in the 68GHz so Il have to add 2 more cores to each 4 dualies taht were added

So 3GHz x 2 = 6 x 4 = 24

68 + 24 = 92.

That OK? Just post up the real GHz when you work it out :up:

[XC] Lead Head

08-26-2008, 02:41 PM

Opteron 165 @ 2.5 (My board won't do any better FSB wise and remain stable)

So 5GHz of uber crunch powah

jspace

08-26-2008, 05:12 PM

14.36GHz of K8 uber power. Suck it 2006!

Once I can afford to get internet at my place that number will change, I have something I need to show you. Gotta find the camera though.:cool:

Bobsama

08-28-2008, 07:35 PM

Well I guess I should post this now... might as well--<1 week away.

E2140 @ 3248MHz for a grand total of 7.396GHz. So, unless someone wants to sell me a q6600, it'll be low till Nehalem makes me update the rig.

Slay0r

08-29-2008, 06:25 AM

Updated :yepp:

So 68GHz.

Plus you said 4 Quads.

Il assume their at 3GHz each. They were already included in the 68GHz so Il have to add 2 more cores to each 4 dualies taht were added

So 3GHz x 2 = 6 x 4 = 24

68 + 24 = 92.

That OK? Just post up the real GHz when you work it out :up:
You were about right, I just added them all up and the sum is 94'066 MHz, alas 94 GHz :)

karl_eller

08-31-2008, 03:57 AM

1x Q6600 at 3.6 Ghz = 14.4 GHz
1x Q6600 at 2.4 Ghz = 9.6 GHz

Total: 24 GHz

I've gotta get around to fixing that 2nd quad... assuming I can find what's making it freeze, and also assuming that damn 780i board will do anything worth a damn...

Eller

loonym

08-31-2008, 04:02 AM

My 780i and 790i are 2 of my best clockers, hope you work it out.

Kristall-99

08-31-2008, 02:24 PM

32 - Kristall-99 | 21.8GHz

got tad more power with 2 singles

sempy at 1.76
p4 at 2.79

26.38Ghz

got 3 more singles, but onboard ethernet dont work and need to get ahold of a few NIC's =\

jspace

08-31-2008, 08:40 PM

32 - Kristall-99 | 21.8GHz

got tad more power with 2 singles

sempy at 1.76
p4 at 2.79

26.38Ghz

got 3 more singles, but onboard ethernet dont work and need to get ahold of a few NIC's =\

Here you go. (http://cgi.ebay.com/17-10-100-NETWORK-CARDS-W-ADD-CABLES-NIC-LOT_W0QQitemZ170256585506QQihZ007QQcategoryZ51195Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem)

NaeKuh

09-01-2008, 12:32 PM

My 780i and 790i are 2 of my best clockers, hope you work it out.

i agree i think my 780i is golden.

HOWEVER
the 780i wont last very long on the WCG bench, so i highly NOT recomend you WCG on that badboy. Or should i more call it badgirl.

If you do, dont clock too high. The stress really takes a beating on them.

the FTW version i have no clue on. But ive heard enough from the 780i users, and i have enough 680i experience. I also have a 780i.

The 790i im hearing is also the same. But i have no idea as i dont own one. I gave up on nvidia after the 680i. :shakes:

loonym

09-01-2008, 12:40 PM

So far 6 months with a q6600@3.6 on the msi 780i without a hiccup. I'm actually considering buying another, I like it that much. Plus the fact that it's a very fun board to bench on.

jcool

09-01-2008, 01:34 PM

Remember though, that NV chipset costs way more than a P35 cruncher board, and it eats double the power. Not that ideal I'd say..
Plus it has more bugs, like FSB holes and all that crap. The 780 also suffers from sucky raid performance, just like the 680i. They finally fixed that with the 790. But I agree, especially for memory OC there is nothing like an NV chipset.

phelan1777

09-01-2008, 02:19 PM

working in my position and the % of 680is I have gone through myself and the calls I get about the board.........its crap..........

Each board I have had, has out right failed because of the board itself.

Not over clocked and if so moderatly 3.4GHz on a QX6700.

Well cooled either water or aftermarket NB/Sb.

Each board has failed because of mem controller/bad bios chip/sata port/PCIe slot/two unknowns.

Hell one died after I installed a working optical drive from another PC with a 680i in it....

littleowl

09-01-2008, 02:50 PM

I am not to happy with my 680i or my 780i. :(

skinnee

09-08-2008, 07:42 PM

Update for me...adds are in bold.

1xQ9450@2.66 = 10.64
2xE5310@1.6 = 12.8
2xE5110@1.6 = 6.4
2xE5110@1.6 = 6.4
1xE5110@1.6 = 3.2
1xE6550@2.3 = 4.6
1xPD840@3.2 = 6.4
2xPIII@1.0 = 2.0
1xP4640@3.2 = 3.2
1xP4620@ 3.0 = 3.0

47.64GHz is now 58.64GHz :D

CyberDruid

09-08-2008, 10:22 PM

Well might as well divulge jigglehurtz

Skultrail @ 4 ghz=32

QX/X38 @ 4 ghz=16

E3110 @ 4.05 ghz=8

So 56.1 of them on the Grid over here.

skinnee

09-08-2008, 10:24 PM

Thats how your RAC has been inching further and further away from me!