PDA

View Full Version : Are there any NF2 boards w/more then 2.9v vdimm?

TheWeaseL
09-23-2003, 10:15 PM
The title says it all really. I'm not that steady with soldering, and so I'm wondering if there is an NF2 based mobo out that has bios settings for higher vdimms...My KT400 board has a 3.2v limit, and I was hoping for NF2 to have something...
felix88
09-23-2003, 10:32 PM
maybe the Epox board? it has some pretty crazy voltages. i know the Abit doesn't.
saaya
09-24-2003, 03:24 AM
8rda3+ has 3v or 3.1v i think
Calcu
09-24-2003, 07:33 AM
Most Abit NF7s overvolt to 3-3.1v when set in the BIOS to 2.9v but most Epox I've had undervolt a little 2.85-2.90v, including the 8RDA+, 8RDA3+ & 8RGA+,

Calcu
Liquide
09-24-2003, 07:58 AM
Originally posted by felix88
maybe the Epox board? it has some pretty crazy voltages. i know the Abit doesn't.
The 8RDA3+ has 2.9v max.. don't know about the 8RDA+, think it has the same.
kanedazan
09-24-2003, 08:17 AM
For sure, the NF7 overvolt a BIT, at 2.9, the vdim is at 3.1 or something like that, I hope my OCZ will not burn o_O
Aldus
09-24-2003, 11:34 AM
8RDA+ only goes to 2.9 and undervolts on mine to around 2.86.
TheWeaseL
09-24-2003, 11:49 AM
I have the nf7-s right now, and it does overvolt to 3v when set to 2.9v, but I want more. :)
Holst
09-24-2003, 03:03 PM
They all use the same vreg (abit and epox anywya) so they are all limited to 2.9v even the epox.

But the VDIMM mod isnt hard to do.
TheWeaseL
09-25-2003, 11:18 AM
Damn...
Kunaak
09-25-2003, 11:13 PM
the Albatron KX18D has thier Vdimm to 3 volts.
the Vdd to 1.9.
AGP to 1.8
and Vcore to 2.6 volts (yes thats 6... atleast according to some posts and links from a person here about 3 weeks ago)
TheWeaseL
09-25-2003, 11:22 PM
Possible to VDD, or VDIMM mod that board Kunaak? If so, how difficult?
Kunaak
09-25-2003, 11:43 PM
I really don't know, that board is really new to the market, just released a few weeks ago, and will most likely go completly unnoticed due to the A64 taking all the focus away.
but honestly it has so much voltage available you should be fine with it at stock.
Kunaak
09-25-2003, 11:45 PM
heres the post I was talking about for the Albatron that I saw here.

http://www.xtremesystems.org/forums/showthread.php?s=&threadid=18613&highlight=KX18d
TheWeaseL
09-26-2003, 12:55 AM
I like it, though still with the limit of 3.0v vdimm, my nf7-s already overvolts to that...:x