At last I can join tha 6G 3D Bench Club

[NewBeetle]

I dedicate these results to FUGGER-san. ;)

3DMARK05 : 38818 CPU/GPU/Mem/PCI-E : 6060.9MHz/790MHz/1100MHz/100MHz (http://service.futuremark.com/compare?3dm05=4385019)
http://homepage2.nifty.com/NewBeetle/05_38818_6.06G.png

3DMARK06 : 27128 CPU/GPU/Mem/PCI-E : 6000.3MHz/790MHz/1100MHz/100MHz (http://service.futuremark.com/compare?3dm06=7532900)
http://homepage2.nifty.com/NewBeetle/06_27128_6G.png

3DMARK03 : 98186 CPU/GPU/Mem/PCI-E : 6000.4MHz/790MHz/1100MHz/100MHz (http://service.futuremark.com/compare?2k3=5892536)
http://homepage2.nifty.com/NewBeetle/03_98186_6G.png

Setup
http://homepage2.nifty.com/NewBeetle/HD4870CF_LN2.jpg

M/B : BIOSTAR TP45 HP Ver.5.0 Vcore mod (BIOS:P45BA620.BST)
M/B Bed : V-TEC ARC Bed Rev.5.3
CPU : Core2 Duo E8500 Q807A213#1
CPU cooling : MaxxNeo + LN2 / Temp:-155C
Chipset Cooling : Tara-chan 1st + LN2 / Temp:-50C
Mem : Team PC2-8500 C4 1GB x2
VGA : RADEON HD4870 512MB DDR5 PCI-E CrossFire
VGA Cooling : Stock
HDD : Western Digital WD360ADFD
PSU : SilverStone OP1200
OS : Windows XP
　　
[BIOS SETUP]　O.N.E
Over-Clocking Navigator [Manual OverClock]
Intel(R) SpeedStep(tm) : Disabled
Ratio CMOS Setting : ×8
CPU Frequency Setting : 600
Over Clock Retry Count : 2
FSB(Bsel) To NorthBridge Latch : AUTO
DRAM Frequency : DDR2-1200
DDR2 Enhance Mode : Disabled

DRAM Timing Configuration
DDR2 RCOMP Configuration : Configuration 4
Static tREAD Value : Auto
Configure DRAM Timing by SPD : Enabled

Clock Gen Configuration
PCIE Frequency Setting : 100
CPU Clock Skew Control : 300ps
(G)MCH Clock Skew Control : 100ps
CPU Clock Driving Control : Auto

Voltage Configuration
CPU Voltage : +0.6000v (Actual : 1.94V @ vcore mod)
DDR Voltage : +0.700v (Acyual : 2.66V)
Chipset Voltage : +0.350v
FSB Voltage : +0.350v
CPU Core1 GTL Ref Voltage : 0.63*VTT
CPU Core2 GTL Ref Voltage : 0.63*VTT
MCH GTL Ref Voltage : Auto
CPU PLL Voltage : 1.5v

[alexio]

Well done NewBeetle-san :up:

Shoot me a PM if you have problems overclocking the HD4870s past 790/1100 in Crossfire.

[TheGoat Eater]

Great work - I very much like seeing your work as it never fails to blow my mind :up:

[ZoLKoRn]

Great job NewBeetle-san :up:

Like to see your results always ;)

Keep pushing it :D

[Gautam]

Very nice speeds NB san! :clap:

[G H Z]

That is without a doubt some of the best 3D results I have seen in awhile, 6GHz 3D '06 stable?!?! That is huge on a 9.5x chip. Can't wait to see the cards frozen! :toast:

[FUGGER]

Aquamark3
http://downloads.guru3d.com/download.php?det=673

With that CPU speed the score should be sick. WR is 350,000 or so

Thank NB, hopefully you can get those GPU's to go faster.

[fubarswe]

amazing! congrats to awesome results.., 06@6Ghz is brutal! :-)

[perkam]

Well well well :clap: Insanely Awesome stuff. 6G Benching and not with E8600 ES :eek:

Nice :up: I would try to get those 4870s beyond 840 on the core to get a few points here and there, but that's up to you :)

Perkam

[dduckquack]

we well done

[nachthymnen]

OMG!!!:eek:
Look @ GT1 and GT2 of 3d '05!!!:clap:
Amazing work NB-San!!!:up:

[Zannema]

Impressive result NB-san 6ghz for 3D :eek: :D

[NewBeetle]

Well done NewBeetle-san :up:

Shoot me a PM if you have problems overclocking the HD4870s past 790/1100 in Crossfire.

Thank you so much, alexio-san. :)
I beg your teaching. :D


Great work - I very much like seeing your work as it never fails to blow my mind :up:

Thank you, TheGoat Eater-san. :) :up:


Great job NewBeetle-san :up:

Like to see your results always ;)

Keep pushing it :D

Thank you always, ZoLKoRn-san. :)
Next I will overclock the GPU cards. :D :up:


Very nice speeds NB san! :clap:

Thank you always, Gautam-san. :) :D :up:


That is without a doubt some of the best 3D results I have seen in awhile, 6GHz 3D '06 stable?!?! That is huge on a 9.5x chip. Can't wait to see the cards frozen! :toast:

Thank you so much, G H Z-san. :)
This 9.5x chip is a miracle. :D
But I might not cool this GPU.
I will wait that the Quad GPUs system can work by new BIOS. :p: :D


Aquamark3
http://downloads.guru3d.com/download.php?det=673

With that CPU speed the score should be sick. WR is 350,000 or so

Thank NB, hopefully you can get those GPU's to go faster.

Thank you so much, FUGGER-san. :)
I will try Aquamark3 and GPUs overclocking. ;) :up:


amazing! congrats to awesome results.., 06@6Ghz is brutal! :-)

Thank you, fubarswe-san. :)
It is regrettable that this chip is not Quad. :D


Well well well :clap: Insanely Awesome stuff. 6G Benching and not with E8600 ES :eek:

Nice :up: I would try to get those 4870s beyond 840 on the core to get a few points here and there, but that's up to you :)

Perkam

Thank you so much, Perkam-san. :)
I did GPU's BIOS mod and try 880MHz Benching.
However, I stopped this time because the screen was unstable. :(


we well done

:) :D :up:


OMG!!!:eek:
Look @ GT1 and GT2 of 3d '05!!!:clap:
Amazing work NB-San!!!:up:

Thank you always and so much, nachthymnen-san. :)
I need more GPU overclocking for GT3 of 3D05. :D :up:


Impressive result NB-san 6ghz for 3D :eek: :D
Thank you, Zannema-san. :) :D :up:

DEWA DEWA
NewBeetle

[Fr3ak]

Impressive Mitsuaki-san! :toast: Especially for a 8x/8x configuration.

[@rne]

Great results:clap:
And imho very little nb-voltage for that fsb. Go for am3;):)

[MusicIsMyLife]

Congratulations for that clockspeed. :yepp:

I like that 2k6-score which is freakin fast for a dualcore.... :eek:

[marmott]

Amazing speed !! :eek:

congrats :up:

and the setup, so clean as usual

[M.Beier]

Only 1.94v vgpu? Holy crap that beast is impressive!
And that 3Dmark2005 is insane !

EDIT;
Oh I was sleeping :) (thought it was another chip)

[boblemagnifique]

héhé you are a Golden Chip Newbeetle-San !!!

Impressive Clocking , congratz :)

[SIOUX]

Great results there Newbeetle-san :toast:

[massman]

Thank you so much, FUGGER-san. :)
I will try Aquamark3 and GPUs overclocking. ;) :up:

Now that's something I look forward to :D. While you're at it, would you consider running 3DMark01 as well?

[FatAlbert]

as always high scores ;) :D

you should flashed card to highest clocks :)

[runmc]

Great accomplishment DEWA :D You will make an awesome mentor. :up:

[Techie]

that's some very nice chip you got there!

very nice results !

grtz,

Techie

[gandalfone]

Spi32m 6Ghz- 3dmark 6Ghz....nice NewBeetle-san:D:clap:

If fsb board haeven't problem with cross you can go 6100Mhz 3D if you go spi32m at 6Ghz:D

[gprhellas]

OK you convinced me.:)

:clap:You are a TOP 3D bench-mitsuaki-sun:clap:

It's time to enjoy H.O.T. now…..:party2:

[Oliver]

Impressive work champ...

U rocks and do the job once again...

A truly legend...

Keep pushing it

DEWA DEWA

[Erdemliol]

Impressive results NewBeetle... Congrats

[George_o/c]

Look at these incredible scores ! :up:
Congratulations NewBeetle-san, you are one of the best 3D benchers :yepp:
Can I ask you sth ? 3D 05 is your favorite bench ? I always see it first when viewing one of your threads, that's why I ask :D
Now we need to see some AM3 action ... It's going to be :eek: !

[hiwa]

:up::up: wow :clap: wanna see vga's @ ln2 ;)

[Dualist]

Incredible results New Beetle-san :clap:

Also thank you for posting your bios settings too, I have just received this board this morning, so atleast now I can see where I should be heading, many thanks again.

[Harshal]

Congrats NB-san!!! :clap:
As always something to get inspired from :)
Keep Pushing :up:

[DMH]

Holy crap:eek: now show us some 01 please:p:

[MARCO74]

NewBeetle san 6GHz. for 3D is very impressive!!!!

[SoF]

woooohoooo all that 3D at 6GHZ MUST make everybody wet :hehe: totally amazing screens there! :clap:

[k|ngp|n]

Killer speed NB :up::up:
How many cpu's did it take to find that ungodly chip? :D

[SF3D]

You never let us down Mitsuaki-san. Amazing 3D fsb and amazing CPU :up:

It feels good to be in 6GHz 3D bench club :D

[SoF]

still can't believe that vcore at thoose speeds :slobber: would also like to know how many chips it took you to find "the golden one" ;)

[NewBeetle]

Impressive Mitsuaki-san! :toast: Especially for a 8x/8x configuration.

Thank you my friend Oliver-san. :)
I am really regrettable in no operation of Quad GPUs by this system. :(
It is too difficult to take new WR with Dual GPUs..... :D


Great results:clap:
And imho very little nb-voltage for that fsb. Go for am3;):)

Thank you, Arne-san. :) :up:


Congratulations for that clockspeed. :yepp:

I like that 2k6-score which is freakin fast for a dualcore.... :eek:

Thank you, MusicIsMyLife-san. :)
I will try more GPUs overclocking in 3D06. :up:


Amazing speed !! :eek:

congrats :up:

and the setup, so clean as usual

Thank you, marmott-san. :)


Only 1.94v vgpu? Holy crap that beast is impressive!
And that 3Dmark2005 is insane !

EDIT;
Oh I was sleeping :) (thought it was another chip)

Thank you always, M.Beier-san. :)
Yes, I use another new E8500 I got Sunday morning. :D


héhé you are a Golden Chip Newbeetle-San !!!

Impressive Clocking , congratz :)

Thank you, boblemagnifique-san. :)
Only CPU power is my advantage. :D


Great results there Newbeetle-san :toast:

Thank you always, SIOUX-san. :) :toast:


Now that's something I look forward to :D. While you're at it, would you consider running 3DMark01 as well?

Thank you always, massman-san. :)
3DMark01 is too interesting and difficult for me to play. :D


as always high scores ;) :D

you should flashed card to highest clocks :)

Thank you, Fatalbert-san. :)
Next I will flashed cards to 880/1080. :up:


Great accomplishment DEWA :D You will make an awesome mentor. :up:

Thank you so much, runmc-san. :)

DEWA DEWA
NewBeetle

To be continued :D

[NewBeetle]

that's some very nice chip you got there!

very nice results !

grtz,

Techie

Thank you, Techie-san. :)
I am very lucky to get very very nice chip. :D


Spi32m 6Ghz- 3dmark 6Ghz....nice NewBeetle-san:D:clap:

If fsb board haeven't problem with cross you can go 6100Mhz 3D if you go spi32m at 6Ghz:D

Thank you always, gandalfone-san. :)
Next I will challenge 6.1GHz 3D bench..... :D


OK you convinced me.:)

:clap:You are a TOP 3D bench-mitsuaki-sun:clap:

It's time to enjoy H.O.T. now…..:party2:

Thank you my friend George-san. :)
Now I am not a 3D bencher but a Pi bencher. :D
3D bench is too difficult and costly for me to enjoy..... :p: :D


Impressive work champ...

U rocks and do the job once again...

A truly legend...

Keep pushing it

DEWA DEWA

Thank you always, Oliver-san. :)
I will keep pushing it. :D :up:


Impressive results NewBeetle... Congrats

Thank you, Erdemliol-san. :)


Look at these incredible scores ! :up:
Congratulations NewBeetle-san, you are one of the best 3D benchers :yepp:
Can I ask you sth ? 3D 05 is your favorite bench ? I always see it first when viewing one of your threads, that's why I ask :D
Now we need to see some AM3 action ... It's going to be :eek: !

Thank you so much, George_o/c-san. :)
My favorite bench is 3D 06 and 3D 05 is the 2nd.
But, as my advantage only CPU power, 3D 05 is suitable for me. :D


:up::up: wow :clap: wanna see vga's @ ln2 ;)

Thank you, hiwa-san. :)
I am hesitating to mod 4870s because a new Quad system is released at the end of the month. :p: :D


Incredible results New Beetle-san :clap:

Also thank you for posting your bios settings too, I have just received this board this morning, so atleast now I can see where I should be heading, many thanks again.

Thank you so much, Dualist-san. :)
And you are welcome. ;)
It is my pleasure useful for XS members. :D :up:

DEWA DEWA
NewBeetle

To be continued

[NewBeetle]

Congrats NB-san!!! :clap:
As always something to get inspired from :)
Keep Pushing :up:

Thank you so much, harshal-san. :)
I will keep pushing! :D :up:


Holy crap:eek: now show us some 01 please:p:

Thank you always, DMH-san. :)
I have never played 01.
Because 01 is very interesting and difficult, I am scared that I become lack
of sleep. :p: :D


NewBeetle san 6GHz. for 3D is very impressive!!!!

Thank you, MARCO74-san. :) :toast:


woooohoooo all that 3D at 6GHZ MUST make everybody wet :hehe: totally amazing screens there! :clap:

Thank you always, SoF-san. :)
See you later again. :D


Killer speed NB :up::up:
How many cpu's did it take to find that ungodly chip? :D

Thank you so much, k|ngp|n-san. :) ;)
It is a top secret that I tested almost one dozen in these 6 months..... :D
And I have a news to you.
At last I set up LN2 cylinder in home.
I can approach your LN2 cost and I am very happy. :D
Thank you so much for your information. :)

http://homepage2.nifty.com/NewBeetle/LN2_cylinder.jpg


You never let us down Mitsuaki-san. Amazing 3D fsb and amazing CPU :up:

It feels good to be in 6GHz 3D bench club :D

Thank you so much, SF3D-san. :)
Fianlly I join 6GHz 3D bench club. :up:


still can't believe that vcore at thoose speeds :slobber: would also like to know how many chips it took you to find "the golden one" ;)

It is a top secret that I tested 8 chips these two months. :p: :D

DEWA DEWA
NewBeetle

[Oliver]

Cool to see u got ln2 setup at home...

What size have u got, 150l ?...

[NewBeetle]

Cool to see u got ln2 setup at home...

What size have u got, 150l ?...

Its size is 175L. ;)
I can have LN2 session any time..... :D

DEWA DEWA

[Oliver]

That rocks Mitsuaki-san...

A dream have come truth...

Best Regards

[nachthymnen]

Thank you always and so much, nachthymnen-san. :)
I need more GPU overclocking for GT3 of 3D05. :D :up:

DEWA DEWA
NewBeetle


Can you imagine your score with 2X3870X2:D:shocked:
I've a 292Fps in GT3 with cards @ 930mhz.

[DeDaL]

Very strong bench here, congrats.

I know what is 6G bench in 3D, very impressive.

[makaka]

nice bench , congrats , your my favorite 3D bencher.6 Ghz 3d stable is awesome , again congrats :-)

[FatAlbert]

(...)
Thank you, Fatalbert-san. :)
Next I will flashed cards to 880/1080. :up:
(...)

we want see high scores in 03/05/06 ;) :D

please show us :D

and your dewar :eek:

I'm jealous :D

[LardArse]

Great club... tough membership though :P :D

[NewBeetle]

That rocks Mitsuaki-san...

A dream have come truth...

Best Regards

Thank you, Oliver-san. :) :D ;) :up:

Best Regards
Mitsuaki


Can you imagine your score with 2X3870X2:D:shocked:
I've a 292Fps in GT3 with cards @ 930mhz.

I can imagine. :D
But Bioster P45 boards not work with 2X3870X2 at all..... :(


Very strong bench here, congrats.

I know what is 6G bench in 3D, very impressive.

Thank you, DeDaL-san. :)
I want to make you more impressive on 3D score. :D :p:


nice bench , congrats , your my favorite 3D bencher.6 Ghz 3d stable is awesome , again congrats :-)

Thank you so much, makaka-san. :)
These 3D Bench is only CPU power. :p:
Next I try more GPU overclocking. :D


we want see high scores in 03/05/06 ;) :D

please show us :D

and your dewar :eek:

I'm jealous :D

My dewer is very dangerous when pouring. :(
LN2 is scattered by huge pressure. :eek:
And I bathed in it from the head in this morning. :D :p:


Great club... tough membership though :P :D

Thank you always, LardArse-san. :)
I am proud of the admission to this club. :D :up:

DEWA DEWA
NewBeetle

[NewBeetle]

Thank you so much for your help, Alex-san. :) :up:
Today's results :toast:

3DMARK05 : 39780 CPU/GPU/Mem/PCI-E : 6060.6MHz/880MHz/1080MHz/100MHz (http://service.futuremark.com/compare?3dm05=4390767)
http://homepage2.nifty.com/NewBeetle/05_39780_6.06G.png

AquaMark3 : 326396 CPU/GPU/Mem/PCI-E : 6000.5MHz/880MHz/1080MHz/100MHz
http://homepage2.nifty.com/NewBeetle/AQ3_326396.jpg

Setup (http://homepage2.nifty.com/NewBeetle/HD4870CF_LN2.jpg)
M/B : BIOSTAR TP45 HP Ver.5.0 Vcore mod (BIOS:P45BA624.BST)
M/B Bed : V-TEC ARC Bed Rev.5.3
CPU : Core2 Duo E8500 Q807A213#1
CPU cooling : MaxxNeo + LN2 / Temp:-155C
Chipset Cooling : Tara-chan 1st + LN2 / Temp:-50C
Mem : Team PC2-8500 C4 1GB x2
VGA : RADEON HD4870 512MB GDDR5 PCI-E CrossFire
VGA Cooling : Stock
HDD : Western Digital WD360ADFD
PSU : SilverStone OP1200
OS : Windows XP
　　
[BIOS SETUP]　O.N.E
Over-Clocking Navigator [Manual OverClock]
Intel(R) SpeedStep(tm) : Disabled
Ratio CMOS Setting : ×8
CPU Frequency Setting : 600
Over Clock Retry Count : 1
FSB(Bsel) To NorthBridge Latch : AUTO
DRAM Frequency : DDR2-1200
DDR2 Enhance Mode : Disabled

DRAM Timing Configuration
DDR2 RCOMP Configuration : Configuration 4
Static tREAD Value : Auto
Configure DRAM Timing by SPD : Enabled

Clock Gen Configuration
PCIE Frequency Setting : 100
CPU Clock Skew Control : 300ps
(G)MCH Clock Skew Control : 100ps
CPU Clock Driving Control : Auto

Voltage Configuration
CPU Voltage : +0.6000v (Actual : 1.94V @ vcore mod)
DDR Voltage : +0.600v (Acyual : 2.66V)
Chipset Voltage : +0.350v
FSB Voltage : +0.300v
CPU Core1 GTL Ref Voltage : 0.63*VTT
CPU Core2 GTL Ref Voltage : 0.63*VTT
MCH GTL Ref Voltage : Auto
CPU PLL Voltage : 1.5v

[3lfk1ng]

Huge congrats NewBeetle-san, your in the top 5. (http://www.futuremark.com/community/halloffame/3dmark05/)

[FatAlbert]

amazing ;)

I know 40k is broken, but you don't know that :D

[PPInDaHouse]

amazing cpu :eek:

imagine that setup with the 4870s cooled with LN2 :D

[Oliver]

Sweet update Mitsuaki-san, u are just keep pushing it...

[Hyperhorn]

Almost 40K :cool: Is there a reason why you lost 20 Mhz VRAM speed?
If you look at these results, 6 GHz 3D seems to be easy to achieve but of course it's not. ;) Congrats!

[ataruz]

congratz. NewBeetle very lucky chip... ı will try my cpu with tp45

[NewBeetle]

Huge congrats NewBeetle-san, your in the top 5. (http://www.futuremark.com/community/halloffame/3dmark05/)

Thank you so much ,3 lfk1ng-san. :)
I am glad to rank in the top 5. :D


amazing ;)

I know 40k is broken, but you don't know that :D

Thank you always, Fatalbert-san. :)
I want to know 40k is broken with my system. :D :up:


amazing cpu :eek:

imagine that setup with the 4870s cooled with LN2 :D

Thank you, PPInDaHouse-san. :)
Though I have LN2 Pots for 2900PRO.....
I hesitate to cool with LN2 because new quad GPUs are much faster. :D :p:


Sweet update Mitsuaki-san, u are just keep pushing it...

Thank you always, Oliver-san. :)
I make an effort to break 40k @3D05. ;)


Almost 40K :cool: Is there a reason why you lost 20 Mhz VRAM speed?
If you look at these results, 6 GHz 3D seems to be easy to achieve but of course it's not. ;) Congrats!

Thank you, Hyperhorn-san. :)
It is because the screen fell into disorder @GT3.:(


congratz. NewBeetle very lucky chip... ı will try my cpu with tp45

Thank you, ataruz-san. :)
I wish your new tp45 works fine. :up:

DEWA DEWA
NewBeetle

[AndreYang]

I think I must work hard again for 3D05. Many people are so closed to my score. Great Job, NewBeetle-san.

Try LOD 15. The score is much better.

[NewBeetle]

I think I must work hard again for 3D05. Many people are so closed to my score. Great Job, NewBeetle-san.

Try LOD 15. The score is much better.

Thank you so much, AndreYang-san. :)
The score doesn't increase for the clock because I have little knowledge for 3D Bench... :(
Actually I have never tweak LOD. :p:
Next I will try it. :up:

[FatAlbert]

nice ;)

now you now that too, 40k is broken :D

maybe higher vgas clocks can help, like 900/1100 ?

[hiwa]

wow that's really cool newbeetle-san :up::up::up:

[nachthymnen]

Fantastic '05:eek::clap:
Congratulations NB-San!!!:up:

[NewBeetle]

nice ;)

now you now that too, 40k is broken :D

maybe higher vgas clocks can help, like 900/1100 ?

Thank you always, Fatalbert-san. :)
Next I will try more GPU's overclocking. :up:


wow that's really cool newbeetle-san :up::up::up:

Thank you, hiwa-san. :) :toast:


Fantastic '05:eek::clap:
Congratulations NB-San!!!:up:

Thank you so much, nachthymnen-san. :)
I think that 3D05 is a reasonable score. :D
But I am shameful that AQ3's score is very low..... :( :p:

DEWA DEWA
NewBeetle

[gandalfone]

NewBeetle very nice result

Aqua Fly with dd3 mem...ddr2 is not the best for this bench

[over@locker886]

Very good scores here too NewBeetle-san!Congrats:D:up:

Next week, I will try join in the club..:D:cool:

[Riggs]

Amazing scores new beetle, best of luck with higher overclocks!

[rocketr2]

Why does GPUz displays crossfile disable?

[NewBeetle]

NewBeetle very nice result

Aqua Fly with dd3 mem...ddr2 is not the best for this bench

Thank you and sorry too late reply, gandalfone-san. :)
Now DDR2 system takes AM3's WR! :eek:
I must need to practice AM3 more. :D


Very good scores here too NewBeetle-san!Congrats:D:up:

Next week, I will try join in the club..:D:cool:

Thank you always, M8! ;)
I wish you will join in the club this weekend. :up:


Amazing scores new beetle, best of luck with higher overclocks!

Thank you, Riggs-san. :)
I will try higher GPU overclocking near the future. :D :up:


Why does GPUz displays crossfile disable?

It is GPUz's bug, I think.....

DEWA DEWA
NewBeetle

[Pt1t]

:)

I will get Rampage Extreme this Week to compare CrossfireX 8X 8X ddr2 vs CrossfireX 16x 16x DDR3 on AM3 :D

[NewBeetle]

:)

I will get Rampage Extreme this Week to compare CrossfireX 8X 8X ddr2 vs CrossfireX 16x 16x DDR3 on AM3 :D

Congratulations on your AM3 WR, Pt1t-san. :toast:
Your system is much faster than mine. :eek:
I also want to test Rampage Extreme. :D
But I cannot get it in japan now..... :(

[FUGGER]

Nice update, I missed this before I left for Hong Kong.

Thanks for the AM3, nice quick bench like 1M.

The Rampage Extreme was looking really good at the show, huge bus speeds from stock boards.

[NewBeetle]

Nice update, I missed this before I left for Hong Kong.

Thanks for the AM3, nice quick bench like 1M.

The Rampage Extreme was looking really good at the show, huge bus speeds from stock boards.

Thank you so much, FUGGER-san. :)
AM3 is too difficult for me to take WR..... :p: :D
The Rampage Extreme seems the best DDR3 board for wolfdale.
I want to test it ASAP. :up:

[Astri]

Thank you so much, FUGGER-san. :)
AM3 is too difficult for me to take WR..... :p: :D
The Rampage Extreme seems the best DDR3 board for wolfdale.
I want to test it ASAP. :up:

If you manage to run aquamark with DDR3 at 6Gz, you will be placed on top for sure.
Great work there :up: