PDA

View Full Version : Thermal Shutdown?

Loser777
07-12-2008, 10:06 PM
Anyone gotten serious degradation off of this? After installing my new CPU today, I didn't have the puspins locked in tight enough... and the PC shut down twice... I booted and the PC turned off... and then I booted again, and the PC turned off... before I corrected the problem
Loser777
07-12-2008, 11:16 PM
/bump..
Any of you guys experienced degradation after a thermal shutdown?
Leeghoofd
07-13-2008, 12:19 AM
Why d you think they call it thermal shutdown ? to avoid damage being done to the CPU... degredation doesn't happen in 5 secs... also on anote if youtr pc shutsdown it's no use to keep on tryin got fire it up, something is wrong... like you installed a new cpu you should have been aware it had got something to do with that...

well hope you have better luck with this Q6600 Mate
zanzabar
07-13-2008, 12:48 AM
so you were complaining about your clocks then you are using the stock heat sink
Loser777
07-13-2008, 06:46 AM
so you were complaining about your clocks then you are using the stock heat sink
I'm using it until I can get a bolt-thru for my Xigmatek. On the other chip I had, I was using the S1283, not the Stock Cooler.


---
Sorry, I guess I should call if TJ Max?


---
It's a pwnage chip btw... VID 1.2125v, 3.6GHz @ 1.33v
Loser777
07-13-2008, 10:25 AM
So no one thinks a chip will degrade noticeably if It went to TJ max a couple times (for like 3 secs)?
sdsdv10
07-13-2008, 10:38 AM
unclewebb (developer of Real Temp) took his Q6600 to Tjmax (thermal throttling) several times in this post http://www.xtremesystems.org/forums/showpost.php?p=3132024&postcount=1676 with no ill effects noted. In fact, his opinion seems to be that C2D or C2Q CPUs do a very good job of protecting themselves. It appears to me that degradation of a CPU comes from a combination of high temps and extra voltage necessary for OCing. If what unclewebb implies is true, high temps alone aren't enough to damage the processor.
twilyth
07-13-2008, 10:59 AM
unclewebb (developer of Real Temp) took his Q6600 to Tjmax (thermal throttling) several times in this post http://www.xtremesystems.org/forums/showpost.php?p=3132024&postcount=1676 with no ill effects noted. In fact, his opinion seems to be that C2D or C2Q CPUs do a very good job of protecting themselves. It appears to me that degradation of a CPU comes from a combination of high temps and extra voltage necessary for OCing. If what unclewebb implies is true, high temps alone aren't enough to damage the processor.
Interesting - thanks for summarizing.