Q6600

[darkorb]

i get 17seconds on super pi at 3ghz.

3.6ghz i get 15 seconds.


i need 1.29volts for 3ghz, which is 1.24volts in windows stable

i need 1.5volts for 3.6ghz, which is 1.45 volts in windows still testing

in 3dmark, i get 12,300 with 3 and 12,700 3.6 ghz. CPU score went up from 4200 to 4900.

ill try some other games n **** to see how im doing. and is 1.5 volts too high?

my temps are actually resonable. 60/58/51/56 full load in prime 95. gotta test for stability now

[speedfreak86]

Those numbers sound a little low to me based on your setup, but maybe it is because your ram is not very fast. Superpi will be especially sensitive to ram settings. I would say that you could see another thousand points in 06 also overall. I run 1.52V and a lot hotter than that and have been pretty consistently for about a year. I wouldn't worry too much about it as long as temperatures are in check.

[darkorb]

1.5 volts isnt stable, im gonna try 1.52 later, but its warm and volts are high for my liking

ram is 4gb ddr2 800 5-5-5-15 2x2gb

[speedfreak86]

http://service.futuremark.com/compare?3dm06=5816670

There is one of my old compares with a little bit of a graphics overclock. I think you may be getting a low cpu score because of the motherboard. I personally think that nvidia chipsets hurt cpu scores some as compared to intel chipsets.

Also, my superpi is 14.281 seconds with no tweaks of any kind.

[Skratch]

whats the specs on the q6600,vid,stpeeping,batch # ect.I can bench super pi up to almost 4ghx with 1.5v in bios with my q6600.I have a thread in the bandwith section if you wana compaire pi times

[darkorb]

i have the XFX 680i LT, got it for free so not complaining. that much..

its a bad mobo i no, but i dont want to reformat again, X38/48 is what i really wanted.


vid is 1.2875, the rest is on the chip, and i dont want to take off the heatsink

[Loser777]

The scores are wayy too low. At 3.5GHz, I get around 5500 CPU score.