E8500 5.9G 3D Benchable with Biostar TP45 HP

[NewBeetle]

Hi, guys! ;)

I forgot how to post new thread because I had too neglected to report my bench results. :p:

This week I tested new P45 mobo under LN2.
I love it as much as FOXCONN BlackOps. :D

But this is a quick test of CPU and CrossFire sysyem.
2GPUs is almost default clock.

Next I will try more high-speed 2GPUs CF system. :up:

PS:3870X2 CFX system could not boot at all. :(

Setup:

http://homepage2.nifty.com/NewBeetle/LN2_2900CF.jpg

M/B : BIOSTAR TP45 HP Ver.5.0 Vcore mod (BIOS:P45BA620.BST)
M/B Bed : V-TEC ARC Bed Rev.5.3
CPU : Core2 Duo E8500 Q813A227#1
CPU cooling : MaxxNeo + LN2 / Temp:-135C
Chipset Cooling : Tara-chan 1st + LN2 / Temp:-50C
Mem : Team PC2-8500 C4 1GB x2
VGA : SAPPHIRE RADEON HD2900PRO 1G DDR4 PCI-E CrossFire
VGA Cooling : Stock
HDD : Western Digital WD360ADFD
PSU : SilverStone OP1200
OS : Windows XP
　　
　O.N.E
Over-Clocking Navigator [Manual OverClock]
Intel(R) SpeedStep(tm) : Disabled
Ratio CMOS Setting : ×8
CPU Frequency Setting : 570
Over Clock Retry Count : 2
FSB(Bsel) To NorthBridge Latch : AUTO
DRAM Frequency : DDR2-1140
DDR2 Enhance Mode : Disabled

DRAM Timing Configuration
DDR2 RCOMP Configuration : Configuration 2 or 4
Static tREAD Value : Auto
Configure DRAM Timing by SPD : Disabled (4-4-4-10-6-28-4-4-4)

Clock Gen Configuration
PCIE Frequency Setting : 100
CPU Clock Skew Control : 200ps
(G)MCH Clock Skew Control : 100ps
CPU Clock Driving Control : Auto

Voltage Configuration
CPU Voltage : +0.6000v (Actual : 1.88V @ vcore mod)
DDR Voltage : +0.700v (Acyual : 2.66V)
Chipset Voltage : +0.400v
FSB Voltage : +0.350v
CPU Core1 GTL Ref Voltage : 0.63*VTT
CPU Core2 GTL Ref Voltage : 0.67*VTT
MCH GTL Ref Voltage : Auto
CPU PLL Voltage : 1.6v

[B]Vcore mod
http://homepage2.nifty.com/NewBeetle/TP45HP_Vcore_mod.jpg

MAX FSB : 687.27MHz (http://valid.x86-secret.com/show_oc.php?id=381456)
http://homepage2.nifty.com/NewBeetle/TP45HP_CPUZ_687MHz.png

3DMARK05 : 36214 CPU/GPU/Mem/PCI-E : 5900MHz/800MHz/950MHz/100MHz (http://service.futuremark.com/compare?3dm05=4339377)
http://homepage2.nifty.com/NewBeetle/3DMARK05_36214_P45_2900CF.png

[jugeen]

NewBeetle-san, origato for the great scores! congrats! :clap:

[fubarswe]

wow.., really impressive results Congrats! :-)

[k|ngp|n]

Very nice 5.9g.:up:
This system with the X2's would be blazing fast

[Sav]

5.9 Ghz with biostar :shocked:
congrat:up:

[xwards]

Impressive NewBeetle-san great scores. :clap:

[eva2000]

Nice congrats NB.. 3dmark capable mem @ 621mhz 4-4-4-x at 2.66v is very nice as well :)

[4Qman]

Nice congrats NB.. 3dmark capable mem @ 621mhz 4-4-4-x at 2.66v is very nice as well :)

exactly what i was looking at :yepp:

awesome benching setup :up:

[M.Beier]

NICE Newbeetle-San, amazing as always, you just keep suprising!

How did your cat like the show? ;)

[Oliver]

Sweet work Mitsuaki Tanaka-san...

The biostar p45 boards just keep pushing it...

Will have a eye on u regarding further updates...

Keep pushing it...

[Harshal]

Congrats NewBeetle-san :)
5.9GHz is fantastic!!

[youngpro]

great newbeetle! this motherboard is so impressive, it seems to be pushing what we percieve as good benchable fsb out the window

[TheGoat Eater]

Very nice - looks to be an impressive board - maybe if I go back to Intel chipset this would be the one?

[massman]

Very nice start, but I just know it's not the end ... let's call this a teaser :D

[roy_bono]

spi ??

[begrip]

very nice ram speed :D

[M3kk]

Yep, very very nice :D.
Did you try max pi 1M, Cpu-z Valid and 2k1? :D

[Kean]

Nice clocks!
I would to see SPI1M (or 32M :) ) with this clocks.
What about Performance Level?
You pushed it 1:1 so PL probably was high?

[Hyperhorn]

Wonderful :slobber:
Great FSB and CPU clock!

[teurorist]

i love e85 i love it more than qx :D
nice results and there will something possible
let uss see super pi

[ZoLKoRn]

Woot.. 5.9G 3D benched :eek: Very great job :up:

wait to see more results, Congrats Team-Japan :clap:

[Benny Lodewijk]

Insane result newbeetle! Congrats

[rene19831]

Congrats NewBeetle! Insane E85....
But hopefully in germany the next days we'll get some Biostar P45 too:shrug: This board is amazing....

[gprhellas]

BRAVO Tanaka-san. Very nice. :toast:

[Dualist]

WOW..!!! Amazing results, congratulations NewBeetle-San :clap:

[NewBeetle]

Thank you all !!! :toast:


Very nice 5.9g.:up:

This system with the X2's would be blazing fast
Thank you so much, k|ngp|n-san. :)
I tried the X2's but it didn't work... :(
It seems this mobo has PCI-E compatiblity problems in current BIOS.
I expect new 4870 CrossFire system. :D


Sweet work Mitsuaki Tanaka-san...

The biostar p45 boards just keep pushing it...

Will have a eye on u regarding further updates...

Keep pushing it...
Thank you always, Oliver-san.
Yes, I will keep pushing it. :D


great newbeetle! this motherboard is so impressive, it seems to be pushing what we percieve as good benchable fsb out the window

Thank you, youngpro-san. :)
Your Biostar Tpower P45 is very amazing! :eek:
Congrats your FSB WR !!! :clap:


Yep, very very nice :D.
Did you try max pi 1M, Cpu-z Valid and 2k1? :D

1M time is as fast as ASUS P965 mobos. :up:
But 8M is bit slower by my poor tweak... :shakes:

modPI 1M : 7.718s @6032.9MHz (FSB635.0MHz x 9.5)
http://homepage2.nifty.com/NewBeetle/Bio_9.5x635=7s718.png

modPI 8M : 1m47.687s @5890.0MHz (FSB620.0MHz x 9.5)
http://homepage2.nifty.com/NewBeetle/Bio_8M_01m47s.png

CPU-Z Validation : 6128.14MHz (http://valid.x86-secret.com/show_oc.php?id=379129)
http://homepage2.nifty.com/NewBeetle/Bio_CPUZ_6128MHz.png


Nice clocks!
I would to see SPI1M (or 32M :) ) with this clocks.
What about Performance Level?
You pushed it 1:1 so PL probably was high?

Yes,Performance Level is very high. :D
It's "9".


BRAVO Tanaka-san. Very nice. :toast:

Thank you, M8. ;)
I think that this P45 mobo is more suitable for 3D bench than pi bench. :rolleyes:

DEWA DEWA
NewBeetle

[AndreYang]

Team Japan again.:up: Nice job for great clock 3D benching.

[SeLecT]

Very nice job!

What Fsb did you reched before modding?

[kiwi]

Hi

What TRD are you running @ 620 & 635? vmch = 1.5V?

[sobih25]

awesome bench with biostar p45 NewBeetle-san! :clap:

[Pedro Rocha]

Just amazing, congrats Newbeetle-San :clap::clap::clap:

[Brandybuck]

Great job NewBeetle :up: 5.9ghz benchable E8500:clap:

[NewBeetle]

Thank you, sobih25-san and brandybuck-san. :)


Team Japan again.:up: Nice job for great clock 3D benching.
Thank you so much, AndreYang-san. :)
This is just CPU test.
I wonder I will catch up with your great score. :D


Very nice job!

What Fsb did you reched before modding?

CPU-Z : 640MHz
SPi 1M : 630MHz


Hi

What TRD are you running @ 620 & 635? vmch = 1.5V?

MemSet setting : 4-4-4-4-10 / 4-26-9-11-11-4-8-6-4 / 2600T 2T
BIOS shows vmch : 1.440V (+0.400V)


Just amazing, congrats Newbeetle-San :clap::clap::clap:

Thank you so much, Pedro Rocha-san. :)
Next I will try another GPU systems. ;)

DEWA DEWA
NewBeetle

[runmc]

Newbeetle-San -

You are a true "Champion" :D Congrats on the outstanding fsb :clap:

[George_o/c]

Congrats New Beetle-san :clap: Not only for the 5.9GHz 3D run which btw is just :eek2: :shocked: :eek:, but also for the great fsb you achieved and you SPi 1M run, just great ! :up:

Continue the good work, patiently awaiting your updates :)

[hey]

nice start Newbeetle-san, too bad you had problems with X2's, you just missed WR's :). wolfdale+p45 will certainly be next benching platform :D

[LardArse]

Very nice NB san... the PWM is surprising too! :up:

[Achill3uS]

omg what a chip & mobo you have NewBeetle-san, congrats for the amazing results :up:
cant wait for the first 4870 CF runs with 5.9G cpu :lol:

[Pt1t]

Very nice Results on that cheap Motherbaord !

but why did you do vcore mod ? There is no OPV like Tpower I45, you can do +2v under windows without , and use the biostar software to change vcore by 0.01v under windows. :D

http://www.xtremesystems.org/forums/showthread.php?p=3100882#post3100882

[gandalfone]

Congratz, very nice 3d frequency:clap:

I am sorry for high PL because I love spi32m

[hiwa]

very nice cpu u have newbeetle -san and really nice Spi 1m time and 3dmark scors :up:

[NewBeetle]

Thank you, runmc-san, gandalfone-san, hiwa-san! :toast:


Congrats New Beetle-san :clap: Not only for the 5.9GHz 3D run which btw is just :eek2: :shocked: :eek:, but also for the great fsb you achieved and you SPi 1M run, just great ! :up:

Continue the good work, patiently awaiting your updates :)

Thank you, George_o/c-san. :)

Yesterday I tried another GPU system.
But MAXFSB and 3DMARK05 is very very slightly update. :p: :D

MAX FSB : 692.07MHz (http://valid.x86-secret.com/show_oc.php?id=382640)
http://homepage2.nifty.com/NewBeetle/TP45HP_CPUZ_692MHz.png

3DMARK05 : 36376 CPU/GPU/Mem/PCI-E : 5901MHz/900MHz/1100MHz/100MHz (http://service.futuremark.com/compare?3dm05=4342613)
M/B:BIOSTAR TP45-HPVer.5.0 vmod
CPU:Core2 Duo E8500 Q813A227
CPU cooling:MaxxNeo + LN2 / Temp:-135C
Chipset Cooling:Tara-chan 1st + LN2 / Temp:-50C
Mem:Team PC2-8500 C4 1GB x2 / 4-4-4-10
VGA:MSI RADEON HD3870X2(single)
VGA Cooling:stock
HDD:Western Digital WD360ADFD
PSU:SilverStone OP1200


nice start Newbeetle-san, too bad you had problems with X2's, you just missed WR's :). wolfdale+p45 will certainly be next benching platform :D
Thank you always, hey-san. :)

Next I will challenge 05WR with new wolfdale + P45 system. :D :up:


Very nice NB san... the PWM is surprising too! :up:

Thank you so much, shamino-san. :)

I hope new FOXCONN P45 board is more surprising! :up:


omg what a chip & mobo you have NewBeetle-san, congrats for the amazing results :up:
cant wait for the first 4870 CF runs with 5.9G cpu :lol:

Thank you always, Achill3uS-san. :)

First lot of 4870 were sold out in Japan. :eek:
I could not buy it.... :(
Then I decided to change only P45 mobo but not to change GPUs.... :p: :D


Very nice Results on that cheap Motherbaord !

but why did you do vcore mod ? There is no OPV like Tpower I45, you can do +2v under windows without , and use the biostar software to change vcore by 0.01v under windows. :D

http://www.xtremesystems.org/forums/showthread.php?p=3100882#post3100882

Thank you for your information, Pt1t-san. ;)
I decided to buy this Biostar board when I saw your fantastic results. :up:

But my Bio board cannot work this vcore tweaker. :confused:
And I just love vcore mod very much. :D

DEWA DEWA
NewBeetle

[over@locker886]

Very nice start my friend with P45 system! :up:

[dinos22]

wow i didn't see this thread

amazing
and you also say you were running PL9
that's very nice ...youngpro and i have been stuck with PL10 past 600 probably because of CAS5 clocks

i'll try some CAS4 clocks and some better cooling on NB

wonderful CPU as well :up:

one question....your 8M there is a little slow....have you tried to tweak it some more....it should be in low 1m 4xs :up:...i know that you have a 1m 42s time with P5B DLX :)

[nachthymnen]

Fantastic scores as always NB-san:clap:
Now you need two 3870X2:D

[AndreYang]

First lot of 4870 were sold out in Japan. :eek:
I could not buy it.... :(
Then I decided to change only P45 mobo but not to change GPUs.... :p: :D






I can send you more 4870s if you want.:D I don't know why I received a lot of 4870s when I am in Taiwan now.:ROTF:

[NewBeetle]

Very nice start my friend with P45 system! :up:

Thank you always M8!
Next I will try more big run. :D


wow i didn't see this thread

amazing
and you also say you were running PL9
that's very nice ...youngpro and i have been stuck with PL10 past 600 probably because of CAS5 clocks

i'll try some CAS4 clocks and some better cooling on NB

wonderful CPU as well :up:

one question....your 8M there is a little slow....have you tried to tweak it some more....it should be in low 1m 4xs :up:...i know that you have a 1m 42s time with P5B DLX :)

Thank you always, dinos22-san. :)
My 8M run is very slow because I have no special tweaks. :D
I hear Biostar P45 mobo can run faster with Strap tweaks.
Next I will try it. :up:


Fantastic scores as always NB-san:clap:
Now you need two 3870X2:D

I have got a new P45 mobo today.
I hope it will work well with two 3870X2 CFX system. :D


I can send you more 4870s if you want.:D I don't know why I received a lot of 4870s when I am in Taiwan now.:ROTF:

Thank you so much for your kindness, AndreYang-san. :)
This weekend I will be able to get two 4870s.
But I may not buy them if I can run 3870X2s CFX system with new P45 motherboard. :D

DEWA DEWA
NewBeetle

[TheKarmakazi]

very nice benching as always newbeetle-san! cant wait to see your 4870's in CF!! Good luck on your next runs!

[SF3D]

Impressive work from you Mitsuaki-san! :D

I'm waiting your 4870 CF runs :up:

[dinos22]

Thank you always, dinos22-san. :)
My 8M run is very slow because I have no special tweaks. :D
I hear Biostar P45 mobo can run faster with Strap tweaks.
Next I will try it. :up:
oh i see...that explains things better :up:

if you don't mind i would like to suggest that you try to boot at 600MHz FSB instead of 570
i found that when i boot at 590(haven't tried 570) my superpi is VERY slow...........but when i boot at 600 it's VERY fast :up:

strange but it works heh :)

maybe you will be the first man to go below 1m 40s :cool:
that CPU is awesome...... 5.9Ghz with 1.85v is really special :up:....special CPU and special OCer is pure nerd sex on the beach :D

[G H Z]

Is this for real? ;)

Very impressive NewBeetle, how far can you overclock a Dell? :D :toast:

[Gautam]

Great job NewBeetle-san!

If I might make a suggestion...see if you can try an nVidia 9800GX2. In single card it's stronger than a 3870X2 in all benchmarks.

[dinos22]

Great job NewBeetle-san!

If I might make a suggestion...see if you can try an nVidia 9800GX2. In single card it's stronger than a 3870X2 in all benchmarks.

my board doesn't turn on properly even with cleared cmos and there is no chance i can even OC with GX2 installed
very disappointed atm

i was testing RAM efficiency and this board is super fast

i did a 12m flat time at 3627MHz EEEEEEK :D
http://img393.imageshack.us/img393/9854/32msuperpi12m00063at362po5.png

[Fr3ak]

Impressive results Mitsuaki-san ! :D :toast:

I am stuck at about 600 MHz FSB, because of my weak CPU, but I was able to run very high memory speeds with eh Tpower I45. Did you do any memory testing with your setup? With your high FSB, there is probably no need to test max mem speed using dividers, hehe :)

[Vivi]

Awesome!!
that is sick.
i dont know what biostar is doing but it is working. thanks for the mods aswel.

[NewBeetle]

very nice benching as always newbeetle-san! cant wait to see your 4870's in CF!! Good luck on your next runs!

Thank you, TheKarmakazi-san. :)
I had a quick test of ASUS P5Q-E.
It works well with 3870's in CF. :up:
Therefore, the test of 4870's CF will become a little more previously. :p:


Impressive work from you Mitsuaki-san! :D

I'm waiting your 4870 CF runs :up:

Thank you, SF3D-san. :)
But I have not got 4870s yet in Japan.... :(
Please wait my 4870 CF runs for a while. :D


oh i see...that explains things better :up:

if you don't mind i would like to suggest that you try to boot at 600MHz FSB instead of 570
i found that when i boot at 590(haven't tried 570) my superpi is VERY slow...........but when i boot at 600 it's VERY fast :up:

strange but it works heh :)

maybe you will be the first man to go below 1m 40s :cool:
that CPU is awesome...... 5.9Ghz with 1.85v is really special :up:....special CPU and special OCer is pure nerd sex on the beach :D

Thank you so much for your advice, dinos22-san. :)
And your 32M run @ 3.6G is very fantastic! :toast:
I will challenge below 1m 40s run of SPi-8M. :D


Is this for real? ;)

Very impressive NewBeetle, how far can you overclock a Dell? :D :toast:

Thank you always, my friend G H Z-san. :)
I love a Dell, too.
If you send it to me, I will overclock it to the moon. :D :p:


Great job NewBeetle-san!

If I might make a suggestion...see if you can try an nVidia 9800GX2. In single card it's stronger than a 3870X2 in all benchmarks.

Thank you for your advice, Gautam-san. :)
It seems that current Biostar P45's BIOS has PCI-E compatibility problems. :(
I hope new BIOS can work well with Dual GPU system. ;)


Impressive results Mitsuaki-san ! :D :toast:

I am stuck at about 600 MHz FSB, because of my weak CPU, but I was able to run very high memory speeds with eh Tpower I45. Did you do any memory testing with your setup? With your high FSB, there is probably no need to test max mem speed using dividers, hehe :)

Thank you so much, Fr3ak-san. :)
I tested MAX memory speed @ 2:3 dividers.
I can run Spi-1M @ 709.9MHz.
CPU-Z Validation is 724.9MHz. (http://valid.x86-secret.com/show_oc.php?id=378982)
Biostar P45 mobo is very high memory speed! :up:


Awesome!!
that is sick.
i dont know what biostar is doing but it is working. thanks for the mods aswel.
Thank you, Vivi2-san. :)
I strongly recommend this mobo. :D

DEWA DEWA
NewBeetle

[dinos22]

your notes helped me gain extra FSB thank you
with 570 boot and pmem tweaks it's very fast but i get to run at higher FSB than 600boot :up::up::up:

below 1m40s will be amazing
i hope you will also challenge 32M W.R. soon :cool: but maybe that CPU will also go to 6GHz :yepp:

[NewBeetle]

your notes helped me gain extra FSB thank you
with 570 boot and pmem tweaks it's very fast but i get to run at higher FSB than 600boot :up::up::up:

below 1m40s will be amazing
i hope you will also challenge 32M W.R. soon :cool: but maybe that CPU will also go to 6GHz :yepp:

My E8500 has the possiblity 32M benching @ 6G. :rolleyes:
But pmem tweaks is very difficult for me. :p:
I will need much time to take new WR. :D

[Oliver]

Mitsuaki Tanaka-tan u really have a e85 gem...

[c1rcu1tburn3r]

Great work NB-san, i'll wait some wr from you with p45 chipset :clap:

[dinos22]

My E8500 has the possiblity 32M benching @ 6G. :rolleyes:
But pmem tweaks is very difficult for me. :p:
I will need much time to take new WR. :D

wow dude i can't wait to see that :D
this board is around efficiency of DDR3 boards pretty much....at least all the W.R. holders

the fact you are benchmarking and at such speed we will see first sub 8m time for sure :cool::D:up:

go go go NB-san :D

[gundamit]

Great stuff as usual! Nice to see the 2 8x PCI-E lanes aren't hurting.

I'm also glad I'm not the only one seeing "Disabled (Crossfire Available)" in GPU-Z despite the fact Crossfire is obviously working. I'm seeing the same thing with my 4850s. Not a big deal but kind of irritating.

[NewBeetle]

Mitsuaki Tanaka-tan u really have a e85 gem...

Thank you always, Oliver-san. :)
Today, I tested "P965 Strap Tweker" under LN2 Pi Bench.
I take new WR to me (maybe)..... :D


Great work NB-san, i'll wait some wr from you with p45 chipset :clap:
Thank you, c1rcu1tburn3r-san. :)
Perhaps, I take new modPi 8M WR by this E8500 and mobo. :D


wow dude i can't wait to see that :D
this board is around efficiency of DDR3 boards pretty much....at least all the W.R. holders

the fact you are benchmarking and at such speed we will see first sub 8m time for sure :cool::D:up:

go go go NB-san :D

Thank you so much for your advice, dinos22-san. :)
modPi 8M is OK. :up:
But 32M is N.G. :(
My Team memory is almost breaking because it was overworked too much. :D


Great stuff as usual! Nice to see the 2 8x PCI-E lanes aren't hurting.

I'm also glad I'm not the only one seeing "Disabled (Crossfire Available)" in GPU-Z despite the fact Crossfire is obviously working. I'm seeing the same thing with my 4850s. Not a big deal but kind of irritating.

Thank you, gundamit-san. :)
CPU-Z shows some wrong informations. :(
But I don't mind..... :D

DEWA DEWA
NewBeetle

[NewBeetle]

nioce push Newbeetle-san, love to see some 3D at that speed. :up:



Thank you so much, FUGGER-san. :)
I will show you some 3D at this speed in a few days. :D :up:

I'm very sorry, FUGGER-san. :(
I cannot show you any 3D at that speed.....

Today my system has some troubles.
I can run only 5.85G 3D Bench....
Next I will challenge over 6GHz 3D bench. :D

3DMARK05 : 37351 CPU/GPU/Mem/PCI-E : 5762.9MHz/775MHz/1055MHz/100MHz
http://homepage2.nifty.com/NewBeetle/05_37351_5.76G.png

3DMARK05 : 37620 CPU/GPU/Mem/PCI-E : 5849.2MHz/775MHz/1055MHz/100MHz
http://homepage2.nifty.com/NewBeetle/05_37620_5.85G.png

Setup
http://homepage2.nifty.com/NewBeetle/HD4870+E8500_LN2.jpg

[harleybro]

NewBeetle you are a master! I always look forward to seeing posts and results from you. :yepp:

[DMH]

Great scores,congrat's

[NewBeetle]

NewBeetle you are a master! I always look forward to seeing posts and results from you. :yepp:

Thank you, harleybro-san. :)
Please look at my new Thread. :D


Great scores,congrat's

Thank you always, DMH-san. :)
At last I can join the 6G 3D bench Club. :up:

DEWA DEWA
NewBeetle

[pH(x)]

Good work NewBeetle-san :up:

I like your CPU pot retention mechanism :shocked:

[NewBeetle]

Good work NewBeetle-san :up:

I like your CPU pot retention mechanism :shocked:

Thank you, pH(x)-san. :)
The CPU pot retention mechanism is designed by Vigor who is a legendary Japanese OC'er. :up:

DEWA DEWA