BlackOps+QX9650+Dragon F1EE: 7.859SPI@5891mhz, 16.38 Pifast@5802mhz

[nachthymnen]

After a really bad first experience with 3 pots this morning I've decided to run some SPI, wprime and pifast with my BlackOps.

SETUP:
10L LN2
Dimastech Bench Table
QX9650 L744B156(CB @ -145C @ 5890mhz 1,94V)
Foxconn BlackOps(P02)
2x1GB CellShock 1800
Ati X300
Sirtec High Power 1200W
Win Xp+Sp2

Here is my screenies:

A Wprime 1024 just for fun:
http://www.pctunerup.com/up/results/_200806/20080614181514_233.749.jpg

http://www.pctunerup.com/up/results/_200806/20080614182225_7.218.jpg

A nice Pifast:)
http://www.pctunerup.com/up/results/_200806/20080614182254_16.38.jpg

And this is actually my best SPI 1M:
http://www.pctunerup.com/up/results/_200806/20080614182334_7.859.jpg

For 3 times I've obtained this time and every time pc freeze when I was opening the 2nd CPU-Z for the ram:(
So memory was @ 843mhz 6-6-6-18 1T, I had write wrong in the screen:rolleyes:

I've also a 7.859 @ 5880mhz, but only in picture::rolleyes:
http://www.pctunerup.com/up/results/_200806/20080614182757_Immagine021.jpg

Uff, again soo close to the 5.9ghz:(

[c1rcu1tburn3r]

Nice Nachthy! Good Pifast too...What's happened with 3 pots? :shocked:
I think you can do better spi time tweaking better your OS, anyway :clap::clap:

[MARCO74]

Very nice cpu and mobo my friend:up:

[nachthymnen]

Nice Nachthy! Good Pifast too...What's happened with 3 pots? :shocked:
I think you can do better spi time tweaking better your OS, anyway :clap::clap:

Hey Stefano.
Uhm, my first run with 3 pots has been really bad:(
After a warming up run in '06 I was not able to close other benchies:(:shrug:
One vga totally crazy:shakes:

But it's nice to hand 3 pots:D
Really difficult but nice.:)

Yes, the SPI is not good but I'm weak in tweaking:(:shrug:

@Marco74: Tks Marco and good luck for your bench session:)

[Hyperhorn]

Hey, don't be disappointed, there's really no reason therefore.
Almost 5.9 Ghz benches are really nice and not easy to achieve!
If CPU-Z needs to much time to open, then just tweak the .ini and it will open quickly. (Don't care, if you did that already :))

[nidecker]

Good work Nachthy
Your new qx perform really well (better than the last one?) and also cellshock are amazing...829@cas6 :eek:

:clap:

[nachthymnen]

Hey, don't be disappointed, there's really no reason therefore.
Almost 5.9 Ghz benches are really nice and not easy to achieve!
If CPU-Z needs to much time to open, then just tweak the .ini and it will open quickly. (Don't care, if you did that already :))

Tks Hyper:)
Uh, really nice info, I didn't know that:rolleyes::)
Many tks for the suggestion.:)

Well yes, almost 5.9ghz is not too bad:)
But next time I want it:up:

@ Nidecker: Tks my friend.
Yes this new QX is really nice but next time I want to try again with my old L739 with 2V:)

CS is really good ram, I've closed the 1M @ 843 6-6-6-18 1t PL6 and TRD @ 6 with 2.21v

[Bullet92]

Great job nachthymnen :up:

Awesome memory and good PiFast result. You can do 1M better :D
Keep pushing it ;)

[.p4nzer]

Hey, don't be disappointed, there's really no reason therefore.
Almost 5.9 Ghz benches are really nice and not easy to achieve!
If CPU-Z needs to much time to open, then just tweak the .ini and it will open quickly. (Don't care, if you did that already :))

Nice tips!

Good job nacthy!

[Hyperhorn]

Tks Hyper:)
Uh, really nice info, I didn't know that:rolleyes::)
Many tks for the suggestion.:)
Try "Sensor=OFF", that will influence nothing except amount of memory if you use maxmem. You can test others aswell, but IMO this is the best and gains the most) BUT beware, AFAIK validation will not work then! Best thing is to do two shortcuts and name them correctly to prevent confusion. :)

[nachthymnen]

Try "Sensor=OFF", that will influence nothing except amount of memory if you use maxmem. You can test others aswell, but IMO this is the best and gains the most) BUT beware, AFAIK validation will not work then! Best thing is to do two shortcuts and name them correctly to prevent confusion. :)

Tks, yes I had already try:D

Uh, good info, I didn't know that with sensor off validation didn't work:D
Never try.:)
So yes, 2 shortcut is the best way.
Tks again:up:

[palla451]

Also here, congratulation!!!

[HDCHOPPER]

good job ! 6mhz is in your sights
3 pot man lucky dogg

[wasky]

Also here my congratz bros :clap::clap:


George Powa :up:


roberto

[Solarfall]

AAAWWEEEEESOME !!!!!!!! nachthymnen...:toast:
damn i cant wait until my QX9650 arrives so that i can really test my blackops board

[hiwa]

:clap::clap: congrats giorgio :up:

[TheKarmakazi]

very nice work m8!

thx hyperhorn for cpu-z info I did not know that one :)

[Pt1t]

nice score :D

But i dont know what you did in wprime 32M

look : http://i271.photobucket.com/albums/jj153/Jiiiiip/Overclex/wprime_7_294.png

[nachthymnen]

Tks guys:)
Next time I will try to reach the 5.9Ghz:)

@ pt1t: Tks:)

Well, till now I've never understand how to run well Wprime.:shrug:
Maybe is the 512MB set for MaxMem?:shrug:
I really don't know what's the problem of my terrible results.
I only set realtime @ Wprime and nothing other:shrug:

[Harshal]

Congrats Nach :up: This is the best way to put the lil setback with 3 pots.
5.9GHz almost.. keep pushing :D

[nachthymnen]

Congrats Nach :up: This is the best way to put the lil setback with 3 pots.
5.9GHz almost.. keep pushing :D


Tks Harshal:)
In 2 weeks I hope to run again my QX over 5.7Ghz in 3d marks with GTX280:D

Started to testing FSB with my QX aircooled, in 10 minutes, boot @ 440x9:
http://www.pctunerup.com/up/results/_200806/20080618161808_test.jpg

[Harshal]

Awaiting some crazy numbers then my friend :D
Hmm, I tried on MARS [P35] my QX9770 was doing same.. 440boot. Unfortunately DDR3 wasnt working as rated and BO[X48] was not really tested. P45 on other hand was really interesting with 480 boot and 490 MAX on a pre-production Gigabyte ;)

[Hyperhorn]

But i dont know what you did in wprime 32M

look : http://i271.photobucket.com/albums/jj153/Jiiiiip/Overclex/wprime_7_294.png
Looks like you use Vista with simple design (icon next to start-button leads me to believe that). I heard Vista is the better OS for Quad + wPrime-action, but hadn't time to try that for myself. :)

thx hyperhorn for cpu-z info I did not know that one :)
:toast:

[nachthymnen]

Awaiting some crazy numbers then my friend :D
Hmm, I tried on MARS [P35] my QX9770 was doing same.. 440boot. Unfortunately DDR3 wasnt working as rated and BO[X48] was not really tested. P45 on other hand was really interesting with 480 boot and 490 MAX on a pre-production Gigabyte ;)

I really hope:D
This was a super fast test, just 15 minutes:D
Cpu sure can go higher, just I must study more this awesome mainboard:)
I must find the best ram settings for PL and TRD.

[scooter.jay]

Looking very good these black ops boards are really good.

[nachthymnen]

New vga received today:)
Just 2 test before to format the OS:
http://www.pctunerup.com/up/results/_200806/20080627221515_21212.jpg

I love the Nature score:D
http://www.pctunerup.com/up/results/_200806/20080627221523_ScreenShot001.jpg

[nachthymnen]

System full air testing, I like my CellShock with 2,15v:)
http://www.pctunerup.com/up/results/_200806/20080629205313_Immagine044.jpg

http://www.pctunerup.com/up/results/_200806/20080629205108_27773.jpg

1007fps Nature:)
http://www.pctunerup.com/up/results/_200806/20080629205229_1007fpsNature.jpg

[k|ngp|n]

Keep up the great work Nachty!! :up:

[MARCO74]

Nice Vga for air cooling my friend

[nachthymnen]

Keep up the great work Nachty!! :up:

Hey tks Vince, waiting for new bracket and then some Ln2:D

@Marco74: Tks my friend:)
In these days is difficult to bench with stock cooler, really high temperatures also here in the Dolomites:(

[T_M]

Are those blue fans trying to blow into the exhaust?

[nachthymnen]

Are those blue fans trying to blow into the exhaust?

Is just for move air around the memory in the back of the board:)
Really hot:mad:

A '06:
http://www.pctunerup.com/up/results/_200806/20080630144851_22104.jpg

A '03:
http://www.pctunerup.com/up/results/_200806/20080630162147_64484.jpg

[TheKarmakazi]

nice aircooled runs man! cant wait to see the LN2 action on these, should get some very nice results!

[nachthymnen]

nice aircooled runs man! cant wait to see the LN2 action on these, should get some very nice results!

Tks, not push the cpu because I don't want to damage my nice QX under aircooling:)
Maybe this saturday some quad CF actions with 2xHD3870X2(Asus top cards):D
I hope to bench again the '06 @ 5.7ghz for some nice numbers:)

The GTX has started to run well:D
(stock cooler and not pushed to the limit)
http://www.pctunerup.com/up/results/_200806/20080630194713_27917.jpg

http://www.pctunerup.com/up/results/_200806/20080630195457_22291.jpg

[nachthymnen]

Received a nice parcel today:
http://www.pctunerup.com/up/results/_200807/20080702200814_Immagine045.jpg

http://www.pctunerup.com/up/results/_200807/20080702201144_Immagine046.jpg

Sunday my fist Quad CF with cpu under DragonF1, hope to bench again '06 @ 5.7ghz+:D
I hope to have time for bench nvidia and Ati:)

[tiborrr]

Those are some heavy duty videocards, nachthymnen :) Looking forward to see some results. Newer cores seems to overclock much better!

[nachthymnen]

Those are some heavy duty videocards, nachthymnen :) Looking forward to see some results. Newer cores seems to overclock much better!

yes, I hope to do something's good:)
I must to study a little bit Vista, never used before today:(
Cpu-z ever show 6X multi:(
This problem is only with QX right?

[Szlobi]

Very Nice Overclocking!

[nachthymnen]

Very Nice Overclocking!

Tks M8:up:

Finally my fisrt Ati bench after a long time...:D
http://www.pctunerup.com/up/results/_200807/20080703155852_ScreenShot001.jpg

Hey guys, do you think a 1200W psu will be sufficent for two 3870X2 + a 5.7ghz Yorkie?
Or is a better idea to use a Topower 750 for system and the Sirtec for the cards....

[nachthymnen]

Can't wait to freeze my QX again:)
http://www.pctunerup.com/up/results/_200807/20080703192922_106907.jpg

http://www.pctunerup.com/up/results/_200807/20080703172602_24.6k.jpg

http://www.pctunerup.com/up/results/_200807/20080703192943_ScreenShot001.jpg

[saaya]

nice :toast:
damn, that 9650 is very sweet!!! :D

[nachthymnen]

nice :toast:
damn, that 9650 is very sweet!!! :D

Tks sayaa:)
Yes, this QX rocks:D

This is an old fast bench session with GX2:)
http://www.pctunerup.com/up/results/_200806/20080607135205_28429.jpg

I hope to be able to bench again @ 5.7+Ghz with CF:rolleyes::D

[saaya]

mmhhh good luck :D
maybe your cpu is getting better the more you use it ^^