Biostar Tpower I45 Hits 645mhz FSB

[Pt1t]

http://www.overclex.net/data/images/articles/hardware/cartes-meres/2008-05-28/tpowerI451B.jpg

Yesterday i tested a new E8400 on the Biostar Tpower I45 :rolleyes:

E8400 in AIR , 1 core & single channel (630mhz on air 2 cores & dual channel)

Boot to 555*6 and jump to 645 ^^ , memset setting was 5-6-6-15-18 -6-45-11-14-16-5-8-6-6-3120T-2T

http://valid.x86-secret.com/show_oc.php?id=374126

http://valid.x86-secret.com/cache/screenshot/374126.png

I tested the board before with a E8500,

E8500 under Cascade , (625mhz on air on this board)

http://valid.x86-secret.com/show_oc.php?id=367447

http://valid.x86-secret.com/cache/screenshot/367447.png

I will do more test under cold :D

[Monstru]

Great results. How much FSB do those 2 CPU's get on Commando? :)

[K404]

To celebrate, you have to send that board to me :p:


nice to see Biostar bringing the goods :) Lets see some SPi32M at a higher multi ;)

[loopy83]

Nice to see a very good FSB on a Biostar.... try higher multi and push it :)

[I34z1k]

Awesome work as usual man :)

[kiwi]

Do you know if biostar planning to release DDR3 + P45?

[massman]

I want to see that same FSB using multiplier 7x, please :-)

[Pt1t]

Do you know if biostar planning to release DDR3 + P45?

Yes , but for 10-11 /2008

[Pt1t]

I want to see that same FSB using multiplier 7x, please :-)

i want to see 646 with 9X ;)

[Sadhiq]

Do you know if biostar planning to release DDR3 + P45?

I'm also waiting for this ! :up:

Would be great to have a P45+DDR3, high fsb and good scores.

Does 8x/8x CF bridle the performances ?

[massman]

i want to see 646 with 9X ;)

:D:D:D

[kiwi]

Yes , but for 10-11 /2008

socket 1366? :D 775 will be obsolete soon ;)

[Pt1t]

socket 1366? :D 775 will be obsolete soon ;)

Yes i know :)

[StellaNor]

Darn, thats incredible performance, congrats :-)

Wish it would support DDR3 sooner.

[kiwi]

Then why release old socket :confused: DDR3 for average Joe? :D

[massman]

775 will be obsolete soon ;)

Then you're misinformed ;).

[Bullet92]

Seems that P45 mobo's like Wolfdale cpu's. First P5QE Dlx (ddr3 board) an now Biostar's TPower. Want to see Commando vs. TPower vs, P5QE Dlx soon :D

[kiwi]

Then you're misinformed ;).

Boards for average Joe don't count :D

[Pt1t]

the TP45 HP also :D , just out of box and first boot ^^

http://valid.x86-secret.com/show_oc.php?id=374346

http://valid.x86-secret.com/ccpuz.php?id=374346&nocache=1

[hey]

I'm also waiting for this ! :up:

Would be great to have a P45+DDR3, high fsb and good scores.

Does 8x/8x CF bridle the performances ?

in case of 06, only 100p difference with 16-16,vantage 50-70p difference. but in case of gaming performance it differs up to 7fps at bioshock 95-102fps..:up:

again nice results Thomas, lets see some xtreme benching session :up:

[massman]

Boards for average Joe don't count :D

I don't think you'll switch to Nehalem if you can't get a decent frequency out of it :p:

[dinos22]

:eek::eek:

[Oliver]

Impressive work Thomas...

Keep pushing it.

[ZoLKoRn]

That's insane motherboard :D

Very nice FSB Thomas :up: so how lower Perf Lvl of memory is can get about ~600FSB ?

wait to see more benching buddy ;)

[Benny Lodewijk]

great board !!! Any bench ???

[SeLecT]

This is holy sh*t :banana:

I like this board! :D

[metro.cl]

Here youy can read a BIOS OC Guide made by Biostar :)

http://www.biostar.com.tw/app/en-us/event/tpi45oc/index.htm

It has several SS from BIOS.

[Pt1t]

great board !!! Any bench ???

This week end :D

now i m testing DS5 :)

and before to test all board under cold , i want to know max fsb on air on all :p

[jugeen]

GJ Pt1t! :clap:

[[XC] gomeler]

Holy Cheap Motherboard! Nicely done Thomas, wonder how much more you can pull out of those chips. You are an FSB clocking master.

[Glow9]

Biostar is good stuff, every once in awhile they throw something real solid out there

[kenofstephen]

obviosuly a Duo oc board,

no expectation on Quad at all.

[dinos22]

obviosuly a Duo oc board,

no expectation on Quad at all.

who cares about quads :yepp::D

[AceGoober]

Wow! Nice FSB on that inexpensive board. Good job! :D

[Pt1t]

obviosuly a Duo oc board,

no expectation on Quad at all.

My QX9650 C0 did 515 on air

and

2* QX9650 C1 did 520mhz.

[Tony]

My QX9650 C0 did 515 on air

and

2* QX9650 C1 did 520mhz. Unfortunately thats not the norm m8, quads have FSB issues and 450 is usually good going.

Plus quads push a heavy load onto the MCH which will lower its ability to run FSB.

[Slay0r]

Unfortunately thats not the norm m8, quads have FSB issues and 450 is usually good going.

Plus quads push a heavy load onto the MCH which will lower its ability to run FSB.

Pt1t says he's had 3 quads do 500+, perhaps this board/chipset allows a little bit more fsb than we've seen so far

any word on stability at those speeds Pt1t? good job on 645 by the way :up:

[Pt1t]

Unfortunately thats not the norm m8, quads have FSB issues and 450 is usually good going.

Plus quads push a heavy load onto the MCH which will lower its ability to run FSB.

i tested the QX950 C0 on P5QE and it did also 515mhz, Boot @ 500mhz .

This chip did 490 on X48T DQ6 and 470 on foxconn blackOPS.

[erickwok]

http://www.overclex.net/data/images/articles/hardware/cartes-meres/2008-05-28/tpowerI451B.jpg

Yesterday i tested a new E8400 on the Biostar Tpower I45 :rolleyes:

E8400 in AIR , 1 core & single channel (630mhz on air 2 cores & dual channel)

Boot to 555*6 and jump to 645 ^^ , memset setting was 5-6-6-15-18 -6-45-11-14-16-5-8-6-6-3120T-2T

http://valid.x86-secret.com/show_oc.php?id=374126

http://valid.x86-secret.com/cache/screenshot/374126.png

I tested the board before with a E8500,

E8500 under Cascade , (625mhz on air on this board)

http://valid.x86-secret.com/show_oc.php?id=367447

http://valid.x86-secret.com/cache/screenshot/367447.png

I will do more test under cold :D





amazing motherboard!

could you tell me what is the voltage settings ? (Vcore, Vnb... etc.) ;)

[Pt1t]

amazing motherboard!

could you tell me what is the voltage settings ? (Vcore, Vnb... etc.) ;)

Vcore 1.2
VBN +0.4v (~1.5v real)
VFSB +0.3v
Vpll 1.6v

[hixie]

Vcore 1.2
VBN +0.4v (~1.5v real)
VFSB +0.3v
Vpll 1.6v

Thomas you geek, i still can't believe you picked this board over that Biostar chick :rofl::p:
Back on topic, this board seems very tempting, might have to get one to play around with.

[Pt1t]

Thomas you geek, i still can't believe you picked this board over that Biostar chick :rofl::p:
Back on topic, this board seems very tempting, might have to get one to play around with.

:rofl:

Her ?

http://img261.imageshack.us/img261/8932/dsc08105fp1.jpg

[hixie]

:rofl:

Her ?

http://img261.imageshack.us/img261/8932/dsc08105fp1.jpg

:yepp:
I'll see if i'm lucky enough to get both the board and the chick to play around with :D

[Harshal]

Hehe.. Andrew, good luck with multi tasking man :D
Thanks for info Thomas :up:

[hixie]

Hehe.. Andrew, good luck with multi tasking man :D
Thanks for info Thomas :up:

Don't compare me with some computer, i have enough processing power and threads to multi-task with the whole of computex. Just limited to one johnson :rofl:

[Oliver]

Lol hixie...

[kenofstephen]

who cares about quads :yepp::D

no, I mean it.

my P45 can do 4.8GHz on air with 1.55v vcore.

I wonder how much can this 4-phase board can handle. :rolleyes:

in reality we need high main clock for daily operation instead of 1:1 FSB high.

[sofarfrome]

Vcore 1.2
VBN +0.4v (~1.5v real)
VFSB +0.3v
Vpll 1.6v


and vdimm? those sticks must be begging for mercy

[kenofstephen]

as most ppl can't get a 6xx FSB CPU, especially on Retail Box as all of us should know.

while it is much more easy to get a 5xx one,

so it would be nice to see this board runs at 5xx FSB, divider at 5:6 so that memory runs at 12xx-13xx.

[Pt1t]

Here is pics of retail Board

http://www.overclex.net/data/images/news//TpowerI45/TpowerI45_bundle.jpg

[PcCI2iminal]

nice work man
keep pushing :)

[Benny Lodewijk]

i will have this board next week... hopefully the result will be the same :D

[Pt1t]

a quick stability test @ 600mhz fsb :D

http://www.overclex.net/data/images/news//TpowerI45/ortho_600mhz.PNG

[erickwok]

Vcore 1.2
VBN +0.4v (~1.5v real)
VFSB +0.3v
Vpll 1.6v

thank you Pt1t!:up:

[Atal]

what about the cpu batch number?? or did I miss it? gj with that FSB insaaane!!

[BlueAqua]

i want to see 646 with 9X ;)

Why do you want to see that? :lsfight:

Best of luck to you, these P45's look killer.

[Pt1t]

Why do you want to see that? :lsfight:

Best of luck to you, these P45's look killer.

euhmmm :rolleyes:

[Pt1t]

what about the cpu batch number?? or did I miss it? gj with that FSB insaaane!!

Q815Axxx E0

[jozzy]

great job !! awesome numbers :up::up:

http://www.plikimage.com/images/pI685867.gif

[okorn]

Thats some nice motherboard ;)

[kenofstephen]

Q815Axxx E0

Q815A"518" through my brain scanning device.:ROTF:

[TheKarmakazi]

nice work man these p45s are clocking very nicely!

[Kain XS]

Hi Bro.
Very nice Mobo.
Can you try that 600 FSB with priority 9 on orthos or Large FTT?

Congrats man!

[Hutch]

Sweet... I have one on it's way!