[N.B.C.L] First time with commando..6Ghz

[gandalfone]

http://news.tecnocomputer.it/stuff/File/Claudio/commando/cpuz_6130.jpg

http://valid.x86-secret.com/show_oc.php?id=373925



SETUP:

Asus commando (Vcore mod, north air cooled)
E8500 @Ln2 Zannema pot (first time:D)1.91v FPO Q807A246
TeamGroup pc6400 superOC 2.475v
Ati X300
Tagan 900
All the other set bios on auto
Win2k3 (spi32m optimize:p:)


I sincerely is that I have understood too, first run after a nice went CB and must be moved the probe, I again for yards but did not understand nothing with the temp to processor and at 6Ghz stopped the 2° loop spi32m...... well as the first time not bad. Do you understand one word on my delirious english?


Spi1m @ 6080 7.641

http://news.tecnocomputer.it/stuff/File/Claudio/commando/spi_6080.jpg


http://news.tecnocomputer.it/stuff/File/Claudio/commando/img1.JPG


http://news.tecnocomputer.it/stuff/File/Claudio/commando/img2.JPG


http://news.tecnocomputer.it/stuff/File/Claudio/commando/img3.JPG

[Bullet92]

Congrats gandalfone :clap:

You said spi32m optimize? Optimize it than for 1M or post some 32M result :D
I think that you can tweak that memory more and get some better result but this is also awesome :)

[lukas69]

Great score for first run with this setup

[hiwa]

:up::up::up: congrats my friends ;);)

[FUGGER]

That is one sick E8500, nice chip and score

[Dekara]

Great run, congrats!
We expect more sweet 1m&32m numbers, :up:.

[Misko]

m8 really nice 1M run, great 8500 you have :up:

p.s. I do not understand what did u write about 32M problems?

[Zannema]

Impressive score Claudio:)

[systemviper]

another E8500 Batch Q807 rockin the house, great results. :up:

[c1rcu1tburn3r]

Great score ma friend...nice cpu...Italian cpus roxx ahahaha :clap:
Cpu-z top 4
Duck 1° (Japan)
Hiwa 2° (Italy)
c1rcu1tburn3r 3° (Italy)
Gandalfone 4° (Italy)

And really nice spi u done...when i'll find good ddr2 i'll try too with spi1m over 6ghz :up:

[nachthymnen]

Congratulations Claudio:clap:
Fantstic first run with Commando:up:

[wasky]

Gold CPU and fantastic run my friend :up:

gorgeous score ;) you don't use EZCool why ?


regard



Roberto

[gandalfone]

Thx all


c1rcu1tburn3r cange rank:D


North air cooled

Little UP

Screen 6200Mhz 1.912v

http://news.tecnocomputer.it/stuff/File/Claudio/commando/cpuz_6200.jpg


http://valid.x86-secret.com/show_oc.php?id=374119


Spi1m 6130Mhz....7.578

http://news.tecnocomputer.it/stuff/File/Claudio/commando/spi_7_578.jpg


Misko I don't know...I another try spi32 but at 6Ghz don't run....at 5970 3° Loop low 0''.300 than monteboy...then I stop spi. I'll study this thing

[wasky]

:shocked::shocked:

another fantastic run Claudio :yepp::yepp:


roberto

[Bullet92]

Holly crap... :up:
Now we want 1M @ 6.2GHz :D

[nachthymnen]

Great battle with Hiwa now:eek::clap:
This time the best E8500 are in Italy:)

[ZoLKoRn]

Woot.... 6.2GHz:eek: amazing chip, it's monster Wolfdale maybe if you playing under the full-moon night it'll can do 6.5GHz :D

Congrats :up:

[loopy83]

WOW.... awesome run.... for "just" 1,9V its a very nice result... maybe try i bit more voltage?

[hiwa]

:eek::eek::eek: 6130 with just 1.91 that's alien :up::up:

[PytonOrm]

Awsome dude :woot::eek:

[Slay0r]

Great clock :up:

[Misko]

Claudio :clap::clap::clap: beautiful 8500 and beautiful Spi 1M, for 32M maybe try first too find max cpu/mobo combination (ram cl5 relaxed) then go 2-3fsb lower just for sure that it will pass and then start playing with ram, you will need tight latency + jp pmem tweaks to achieve good time on commando. At 5970mhz you can grab a 32M WR if ram can pass 4-4-4-4 but u must apply jp pmem tweaks. Without them run will be much slower. Good luck.

[gandalfone]

Again, thank you


ZoLKoRn You are a poetic man but neither with background moonlight sonata this cpu can go 6500:D


Misko I have myself wrong...this was a fast run, low frequency low timing jp pmem better than high cpu Mhz....I know that but i didn't do it...hehehe

[.p4nzer]

Good run gandalfone :D

[eva2000]

woah congrats man 645FSB!

Yeah JP Pmem tweaks will help with pi times :)

[ZillaPct]

Good work my friend.....:up:


Another E8500 in the Commando Colosseum :D:D

[c1rcu1tburn3r]

:clap::clap::clap:
No words...

[gandalfone]

Congratulations Claudio:clap:
Fantstic first run with Commando:up:

Thx:)


Great score ma friend...nice cpu...Italian cpus roxx ahahaha :clap:
Cpu-z top 4
Duck 1° (Japan)
Hiwa 2° (Italy)
c1rcu1tburn3r 3° (Italy)
Gandalfone 4° (Italy)

And really nice spi u done...when i'll find good ddr2 i'll try too with spi1m over 6ghz :up:

Good luck for ddr2:)


Gold CPU and fantastic run my friend :up:

gorgeous score ;) you don't use EZCool why ?


regard



Roberto


Ezcool is on 790i:)


woah congrats man 645FSB!

Yeah JP Pmem tweaks will help with pi times :)

Thx
In first spi run I used tewaks;)



Good work my friend.....:up:


Another E8500 in the Commando Colosseum :D:D

hehe...ZillaPct:D I'm happy to read here;)
Thx

[gandalfone]

Little little Up

Run superfast...High humidity, H2o on the main after 10min:(

80592


http://valid.x86-secret.com/show_oc.php?id=377133

[Miravo]

Monster wolfdale :) what vcore? Avoid ~2.0v as it killed (I think so) my golden chip :( I think 1.95v is ok... should be :D

[sobih25]

Awesome results! I'm waiting for SPI 16m/32m :).

[monteboy]

Claudio :clap::clap::clap: beautiful 8500 and beautiful Spi 1M, for 32M maybe try first too find max cpu/mobo combination (ram cl5 relaxed) then go 2-3fsb lower just for sure that it will pass and then start playing with ram, you will need tight latency + jp pmem tweaks to achieve good time on commando. At 5970mhz you can grab a 32M WR if ram can pass 4-4-4-4 but u must apply jp pmem tweaks. Without them run will be much slower. Good luck.

Sto ga ne naucis kako treba odmah ?

@Claudio

Check this utility -> http://www.xtremesystems.org/forums/showthread.php?t=180850
and play on air with MCH Timings
You should find the best strap values for 625-628 MHz FSB.

Follow the instruction from the thread to put the utility in the Autorun folder.
It will apply strap tuning on each Windows start.

Maybe , you should think about chipset cooling. With lower chipset temperature you will be able to set tighter strap values.

At this place i should say that JP and other French (before my friend you to !) overclokers earn the most credit for sharing whose MCH adjusting.

My humble self only programm a little utility to make this easier , especial for LN2 benching.

[DeDaL]

@Claudio you great. :clap:

[scooter.jay]

Really great clocks well done 6.2ghz:shocked:

[gandalfone]

Thx gentleman

@monteboy: maybe tonight we'll run north under Ln2 and use jp pmem tweak....we will see;)

[monteboy]

Thx gentleman

@monteboy: maybe tonight we'll run north under Ln2 and use jp pmem tweak....we will see;)

good luck!
I'll see a sub 8 Result !

[nachthymnen]

Wow Claudio:eek:
Just unbelivable:eek::clap:

[Bullet92]

OMG... Another wonderful chip here... We'll wait 1M/32M today ;)

Congrats again...

[Hyperr]

This chip rock! :shocked:

Congrats! :clap:

[gandalfone]

good luck!
I'll see a sub 8 Result !

Thx....but we had a problem:D we'll try again...

Sub 8 is hard with commando...I think possible with p35/p45/x48 (ddr3 power)

Thx all

Nathchy thx...north under Ln2 isn't easy:ROTF:

[xTKxhom3r]

wow thats awesome!

[monteboy]

Thx....but we had a problem:D we'll try again...

Sub 8 is hard with commando...I think possible with p35/p45/x48 (ddr3 power)

Thx all

Nathchy thx...north under Ln2 isn't easy:ROTF:

for NB i think dryice is better.

[hiwa]

:up::up: Nice work claudio

[Dekara]

for NB i think dryice is better.

I agree, DI is much easier for control nb temp and target nb temp is usually around -20C.

[SoF]

good old commandos doing good jobs lately :cool: another impressive oc on that board :up:

[gandalfone]

Thx
We will try again, I don't know how and when, but try again:D

[philbrown23]

wow holy crap! I need me a board that will do 600+ fsb!

[gandalfone]

Update commando north liquid cooling

When I was running 6Ghz finish pressure Ln2 container...hahahah....so close 3°wr

Setup:

Commando north Liquid cooling 18°c Vcore Mod...no Vdorp mod...sigh
E8500 @LN2
Teamgroup Pc 6400 superOc
Ezcool 1k
Win2k3 tweak...waza, real time.

spi32m 8' 10''.922

http://news.tecnocomputer.it/stuff/File/Claudio/commando/spi32_8_10_commando.jpg


http://news.tecnocomputer.it/stuff/File/Claudio/commando/commando_liquid_1.JPG


http://news.tecnocomputer.it/stuff/File/Claudio/commando/commando_liquid_2.JPG

[c1rcu1tburn3r]

Wow, really great m8!!! Nice mobo and ddr2 too :D
Maybe you can do better, 10" aren't too much! :clap::clap:

[Dekara]

:eek:630fsb:eek:
With that sick fsb your monster cpu are definitely capable for sub 8m. Go for sub8 :up:.

[MARCO74]

nice cpu end great 32M

[makaka]

waw men nice score and clock congrats

[gandalfone]

Thx everyone:)

[pippo369]

Great result Claudio, i think you can take 32M W.R. with this wonderful Cpu. :up:

[gandalfone]

Great result Claudio, i think you can take 32M W.R. with this wonderful Cpu. :up:


Thx my fiend

WR is hard:D but I will try....sure:)