100K 01SE stock clocks "single"-gfx

[M.Beier]

TEAM ODOC:
Oliver, THC, M.Beier

Not tweaked, just a little teaser...
Basicly: Clean OS, a little windows settings, LOD +4.9 for nature, no LOD for other tests, PCI-E; 115mhz

Nature -> GT1,2,3 - not optimized order...
1:2 ram, and timings not allowed to be set on blackops :mad:

http://img178.imageshack.us/img178/2034/100kda4.jpg

[xwards]

nice score for stock clocks :clap:

[nachthymnen]

Nice start.:up:
Why 15X multi?
Mainboard an ram?

[Oliver]

fsb achivable from BlackOps, we need to investigate gtl settings and the board overall to arhchive better fsb... 420 range is dorable, but we need to get 440 or sth like that, so we can have a decent performance...

thx

[Achill3uS]

wtf stock clocks guys? :D show us the other results you made :p:
btw :clap: congrats!

[Oliver]

Think Marc means stock gpu clocks lol...

[M.Beier]

Think Marc means stock gpu clocks lol...

nono, stock gfx..
Shader, ram, gpu... :)

Ofc. not stock CPU :ROTF:

EDIT:
The high multi is due mobo didnt allow us further... I've asked Shamino for advice on FSB, no reply yet, but hopefully before next weekend :)
Never the less, I think its interesting that its possible with stock on gfx... Especially since gfx is possible to clock 50% GPU(and shader) and 15-20% mem!

[Oliver]

True stock gpu, includes stock gpu/shader linked and 1000mhz mem...

[RockfordFosgate]

Nice score ;)

[Don_Dan]

At first, nice results, and keep pushing it! :)

I have a question regarding the clocks of your card that I have asked two times before but I never got an answer. I thought frequency of the core is derived from PCIe-bus frequency on all Geforce 9 cards, so PCIe of 115MHz would mean you are running at 690MHz core frequency, raised shader frequency included. I'm not into 3D-benching and have no measure to check it, but maybe you can. That's what I wonder, what do you think?
( I don't mean to question your results or anything like that, I'm just curious because of what I read. :) )

[M.Beier]

No, I dont belive so, the PCI-E freq boost effects only in benchmarks with high framerates to my knowledge...

If it was as you've listed, we would have ran 1050mhz benchmarks at a later stage...
- We havent published other results as we had tons of issues after flashing BIOS... Mainly due bad insulation, it was SOAKED! When we reflashed, we only got one core by mistake, and took us quite some time to figure the error.... So our results werent impressive...

[tiborrr]

At first, nice results, and keep pushing it! :)

I have a question regarding the clocks of your card that I have asked two times before but I never got an answer. I thought frequency of the core is derived from PCIe-bus frequency on all Geforce 9 cards, so PCIe of 115MHz would mean you are running at 690MHz core frequency, raised shader frequency included. I'm not into 3D-benching and have no measure to check it, but maybe you can. That's what I wonder, what do you think?
( I don't mean to question your results or anything like that, I'm just curious because of what I read. :) )

That applies to G94 cores, 9800GX2 is 2x G92.

[Oliver]

As tiborrr says, thats sth u will see if u try 96gt example...

[dpa]

hey guys! hmmm, 370 is low.. bump up the vtt and pll

pll = 1.7
vtt = 1.725
vnb = 1.808
vsb = 1.62
vddr = 2.1

now you can run 420 at perf lvl 5 with ram 1:4 cpu 333, and up to 450Mhz perf lvl 6 with ram 1:4 cpu 333. Many other manages to run 266, but my board just wont.. wierd.

the blackops runs high fsb for sure, you just need to tweak it some.. ;)

AIR:

[Oliver]

Sweet fsb dpa...

As mentioned we need to test glt settings...

And vpll and vtt have been low as for the clocks...

I have runned 455 1m stable with quad at 1.54 or 1.58 pll and 1.45 or 1.5 vtt

In a week we will tear it up...

[tiborrr]

Mine doesn't go above 555MHz, but it's an ES sample.

[dpa]

Mine doesn't go above 555MHz, but it's an ES sample.

my board is also ES board :)

[tiborrr]

I know, but not all the SKUs clock the same. Tried your setting a while ago, didn't do any better. Tried range of CPUs that all do ~ 600MHz, to no avail. My X48 is L746A if i recall correctly :)

[Don_Dan]

No, I dont belive so, the PCI-E freq boost effects only in benchmarks with high framerates to my knowledge...



That applies to G94 cores, 9800GX2 is 2x G92.


As tiborrr says, thats sth u will see if u try 96gt example...

Thanks guys for making this clear for me!

[tiborrr]

P.S.: Forgot to congratulate earlier but i won't until you overclock tha videocard! :up:

[M3kk]

Nice work Beier, Oliver, THC :D.


hey guys! hmmm, 370 is low.. bump up the vtt and pll

pll = 1.7
vtt = 1.725
vnb = 1.808
vsb = 1.62
vddr = 2.1

now you can run 420 at perf lvl 5 with ram 1:4 cpu 333, and up to 450Mhz perf lvl 6 with ram 1:4 cpu 333. Many other manages to run 266, but my board just wont.. wierd.

the blackops runs high fsb for sure, you just need to tweak it some.. ;)

AIR:

What is that bios`s version? :D
That`s sounds kinda new :P

[dpa]

Nice work Beier, Oliver, THC :D.



What is that bios`s version? :D
That`s sounds kinda new :P

P04 does wonders for wolfdales. I have had my 6700 at 570-580 on an early beta bios. all air..

[Oliver]

Thanks, next week we will tear the card up with other bios package, furthermore benching with lower multi and higher fsb...

[M3kk]

P04 does wonders for wolfdales. I have had my 6700 at 570-580 on an early beta bios. all air..

What is the difference about the GXX and P0X bioses? :confused:
Can you share the P04 ?

[Oliver]

g is beta p is official rls