pic request (tj-09) rad q

[pwolfe]

Is it possible to mount a 120.1 in the position of the intake fan on a silverstone tj-09? I'm talking about the fan right by the side vents. Thanks in advance, I wanna say I saw a picture of this and cant find it for the life of me.

[JackOfAll]

http://www.tomshardware.com/reviews/system-builder-marathon,1797-9.html

[oerekum]

Yeah it'll fit just like any 120mm fan hole. A bit of a shame really, that intake bracket is quite big. They could have fitted a 140mm fan or maybe even two 120mm fans. I'm going to mod my TJ09 soon and place a PA120.2 in that exact spot.

[No1451]

Yeah it will mount like he said, but the tubing can be sort of foolish, and if you mount it barbs-up you might have issues with your gpu being in the way.

[pwolfe]

Thanks for the link to the pictures and the info guys. I think I'm gonna throw better judgement out the window and use some 90s to make this work for me.

How bad would 3 90 degrees across 2 rads, and 2 blocks be?

[Cptn Vortex]

I did it too, let me see if I can find a pic. http://www.hardwarecanucks.com/forum/water-cooling/7046-9800gx2-single-120mm-rad-3.html#post58097

[pwolfe]

thanks for the other pic. So Jackofall, do you have the fan and rad each on one side of the mount? In the picture it looks like there is no fan.

[No1451]

The fan is inside the shroud, the radiator is attached using the long screws that come with the radiator(run then through the back of the fan out into the radiator), so that the rad is attached to the shroud, with the fan inside blowing either in or out(in is the standard btw).