finally 4000+ mhz

[WizardB]

Finally I found a cpu that can handle 4 ghz and some memory too that can run at 2 2 2 6 at 229 mhz stabil...

some pictures :)

http://promodders.dajm.com/anv/upload/wizardb77/cpuz_4010.jpg

http://promodders.dajm.com/anv/upload/wizardb77/mbm_4010.jpg

http://promodders.dajm.com/anv/upload/wizardb77/pcmark2002_4010.jpg

http://promodders.dajm.com/anv/upload/wizardb77/pifast43_4010.jpg

http://promodders.dajm.com/anv/upload/wizardb77/prometeia_4010.jpg

http://promodders.dajm.com/anv/upload/wizardb77/sandra_cpu1_4010.jpg

http://promodders.dajm.com/anv/upload/wizardb77/sandra_cpu2_4010.jpg

http://promodders.dajm.com/anv/upload/wizardb77/sandra_mem_4010.jpg

http://promodders.dajm.com/anv/upload/wizardb77/superpi_4010.jpg


Prod Code: BX80532PG2800DSL6WT
MM: 852644
FPO/BATCH: L321B263
Pack Date: 07/21/03

[WizardB]

forgot one picture :)

http://promodders.dajm.com/anv/upload/wizardb77/cpuz_mem_229_2226.JPG

[kromosto]

nice :toast:

[ch!mera]

nice oc:toast: how many volts you feeding that memory? it probably says how much on mbm5 but ive never used the program so i dont know where to look:confused: 3.02v?

[TheDude]

Sweet, try setting your cas to ras to 3 and tras to 11 and check to see if you get any better results with your ram or higher FSB:D

[Amoeba Assassin]

nice:up:

[Creative]

Originally posted by TheDude
Sweet, try setting your cas to ras to 3 and tras to 11 and check to see if you get any better results with your ram or higher FSB:D
Wouldnt that kill his bandwidth though?

I know that changing the 2 to a 3 in my system gives me about ~100 3dmark points less and about 300 MB/s in sandra unbuffered scores :(

High mhz and tight ram timings.....tbh it really shouldnt be that difficult for manufacturers considering it is the year 2003 :D

Nice OC WizardB, fingers crossed my 2.8 performs like this too :) She did 4.1 in the Vapo so I have good faith that the Mach 2 will only make that higher :)

[WizardB]

Thanks :) :) :)

I'm going to try those settings and see :)

I use 3.0 volt on the memory now.

[TheDude]

3 might allow a little higher fsb...could be a wash not sure...just curious. :D

[WizardB]

Tried some with a Hercules 9800 Pro just standard cooling

only made it to 432/370 core/mem so...

anyway a screenshot

http://promodders.dajm.com/anv/upload/wizardb77/3dmark2001.jpg

have also clocked the cpu a bit more :)

http://promodders.dajm.com/anv/upload/wizardb77/cpuz_4026.JPG

[WizardB]

This speed is 100% stable have been running prime95 torture test now for 2 hours and at the same time Quake3 timedemo bench and no problems, this is at 1.70 vcore and 3.1 vdimm

[WizardB]

New result with 1.75 vcore :)

http://promodders.dajm.com/anv/upload/wizardb77/cpuz_4110.jpg

Prod Code: BX80532PG2800DSL6WT
MM: 852644
FPO/BATCH: L321B263
Pack Date: 07/21/03

[TheDude]

Did you try the different ram settings and if so was it better or worse, thanks :D

[Creative]

Id be interested to know that too....cos maybe even the etra cpu mhz will counter the timings :)

Damn thats a fine fine cpu Wizard :thumbsup:

[PytonOrm]

:D my sweden record 4GHZ with a 2.4ghz cpu !!!

http://w1.565.telia.com/~u56506172/337fsb.jpg

i cant take any memory test, i have only single memory right now
it´s dead second mem :(

[saaya]

mem@230?

[WizardB]

I'm going to try those ram settings tomorrow and see what results it gives, have been working a lot today and so :)