PDA

View Full Version : [Team.AU] CollectiveLAN - West Australia

kayl
06-03-2008, 07:55 AM
[Team.AU] CollectiveLAN - West Australia

It was a stormy day lightening and heavy ran Frupert and I were benching at the local collective lan party with 30L of ln2. Man it was humid and we had puddles on the boards. SO in between shuts downs and soak up we didn’t have much luck with the QX9770 that cold bugged at -106c. The QX9650 was very average around 5.1-5.2ghz stable so didn’t spend much time with that CPU.
The E8500 did ok on GIG X48T was showing nice fsb speeds
very happy. I conformal coated the motherboards before hand which worked saved us from killing any hardware that day.

http://img409.imageshack.us/img409/6043/99235155ii0.jpg
http://img253.imageshack.us/img253/9427/45382827ql2.jpg
http://img409.imageshack.us/img409/2719/22271534bc3.jpg
http://img238.imageshack.us/img238/7738/92166946ya9.jpg
http://img238.imageshack.us/img238/4333/99392302kt1.jpg
http://img238.imageshack.us/img238/522/75826495la1.jpg

CPUZ @ 5656Mhz
http://valid.x86-secret.com/show_oc.php?id=369821
http://img123.imageshack.us/img123/5151/cpuz5656zp3.png


1Mb SPi 8.323 sec @ 5561MHz
http://img98.imageshack.us/img98/9784/1mspi83328secyz9.png

32mb Spi 13mins 35sec @ 5429Mhz
http://img219.imageshack.us/img219/4743/32mspi9min35secka1.png


3dmark 06 20,900marks @ 5429Mhz
http://img249.imageshack.us/img249/9449/3dmark0620900wr1.png

3dmark05 32,629marks @ 5346Mhz
http://img168.imageshack.us/img168/9570/3dmark0532kmc5.png


wprime 497sec 1024mb @ 5520Mhz
http://img140.imageshack.us/img140/9261/wprime1024mb497secvs2.png
Leeghoofd
06-03-2008, 10:22 AM
Good stuff guys, anyone got a piccie of George ? never seen him on a photo, unless it's him ofcourse :)
rockqc
06-03-2008, 03:13 PM
Looks like a lot of fun. Too bad about the humidity (probably not as bad as Darwin, but still). :p:

This and the P45 Gigabyte boards seem to be putting out some nice results going by a few threads posted here. How did you find it ?
kayl
06-04-2008, 06:29 AM
Good stuff guys, anyone got a piccie of George ? never seen him on a photo, unless it's him ofcourse :)

no dont have any pics of george. One day i hope to meet him though

Looks like a lot of fun. Too bad about the humidity (probably not as bad as Darwin, but still). :p:

This and the P45 Gigabyte boards seem to be putting out some nice results going by a few threads posted here. How did you find it ?


Yeah i would hate to think what the humidity is like in darwin, james (slidog) said it gets pritty bad their.
Yeah the gigabyte boards are doing quiet well, nice board :clap:
This is most proberly the best board i have used so far in regards to FSB speeds on this wolfdale. tried it in about 5 boards now and this is the best board yet. THe trick youngpro told me to help with FSB speeds was you need to set CPU Clock Skew Control [150ps] and ya set :yepp:
rockqc
06-04-2008, 08:44 PM
Thanks for the tip. :up:
chispy
06-04-2008, 08:49 PM
Kayl stock board ? no mods ? very high fsb for a X48 bro , job well done :up:
MnM
06-04-2008, 09:14 PM
Good stuff guys, anyone got a piccie of George ? never seen him on a photo, unless it's him ofcourse :)

George is on the other side of the country ..about 4000KM away from those guys....
SoulsCollective
06-05-2008, 01:12 AM
Major props to Kayl and Frupert for coming on down and putting on a show for us despite the awful weather. Much appreciated guys :)
dinos22
06-05-2008, 01:23 AM
nice going guys
ZoKi
06-05-2008, 04:04 AM
CRAZY.. well done :)
before
06-05-2008, 04:44 AM
Nice results guys :)
kayl
06-05-2008, 06:41 AM
thanxs guys

Kayl stock board ? no mods ? very high fsb for a X48 bro , job well done :up:

Thanxs chispy, it was a stock board, except I took the heat pipes and
thermal pads off, added artic silver and pcb lacer then replaced heat
pipes. The X48T had a IHS cover on the NB core which looked cool.


Major props to Kayl and Frupert for coming on down and putting on a show for us despite the awful weather. Much appreciated guys :)


No probs mate ;)
kayl
06-05-2008, 07:39 AM
Lans over, but i have had a little play with the frozen Cascade, 618FSB now ;)
5875Mhz validation :)
Will be doing some more benching over the next few weeks
http://valid.x86-secret.com/show_oc.php?id=371155
http://img48.imageshack.us/img48/7923/5875mhzqn1.png
http://img411.imageshack.us/img411/9589/dsc02483us2.jpg
http://img411.imageshack.us/img411/8855/dsc02529fm0.jpg
http://img162.imageshack.us/img162/7026/aquamark304k1sq3.png
http://img338.imageshack.us/img338/1885/aquamark304kyn6.png
SoulsCollective
06-05-2008, 05:08 PM
Holding -110 on a quad under load? That's a beefy unit there :O
kayl
06-09-2008, 07:31 AM
Holding -110 on a quad under load? That's a beefy unit there :O

it hold's load around -105c and -108c idle between runs. For a quad core will be slightly warmer temps

3dmark01 92k @ 5482Mhz
http://img294.imageshack.us/img294/232/92k3dmark01bo3.png

1m spi 8.156 sec @ 5679mhz
http://img140.imageshack.us/img140/9382/1mspi81s56ecgd9.png

9m 26sec 32m spi @ 5520mhz
http://img374.imageshack.us/img374/3583/9m26sec32mspiyt9.png