XS Case Gallery [Archive] - Page 4 - XtremeSystems Forums

SlackerXL

07-24-2006, 09:33 AM

I like the design of the airflow (without the bottom rad).

I just don't see the reasoning for 2 rads in 1 system unless you have 2 seperate watercooling setups in the same case, which would mean 2 pumps, 2 res's etc etc.

Doesn't adding another radiator change the flow of the water aswell, especially with the flow going from the top of the case to the bottom (and then having to go back up to the components).

But maybe I'm not thinking about this correctly :confused:

Be interesting if you could post the 15 cases you've built with this design to see exactly how it's all setup/working etc :)

when i say dual rad i mean 240> 2x120fan single radiator
not dual as in 2 seperate radiators...
i must have gave the wrong impression
please excuse my English ...

i think that now you can see that the airflow configuration illustrated before
involves only 1 radiator
the one placed at the bottom......

as for the prementioned WC cases
i don't keep worklogs for all the mods i do..
nor do i keep logs of temps and settings...
could you imagine doing that for every single customer???
i only take some pics for the most interesting ones...

i hope you'll recognize the configuration we are talking about
in the following cases

(sorry for double posting the same pics within two days but...)

http://i7.photobucket.com/albums/y278/SlackerXL/INTELDEMO.jpg

http://i7.photobucket.com/albums/y278/SlackerXL/AMDEMO.jpg

http://i7.photobucket.com/albums/y278/SlackerXL/4Cards4.jpg

equilibrium

07-24-2006, 09:42 AM

when i say dual rad i mean 240> 2x120fan single radiator
not dual as in 2 seperate radiators...
i must have gave the wrong impression
please excuse my English ...

i think that now you can see that the airflow configuration illustrated before
involves only 1 radiator
the one placed at the bottom......
cool :)

Soz I was mis-understanding, I looked at the pictures on the above post with the rad on the top of the case which I really like as it means the hot air from the rad leaves the case instantly. (but I wrongly put the two ideas together)

Cool paint jobs on those cases hehe :)

I still don't get the idea of putting a rad at the bottom of the case when there's room at the top hehe :p: , altho I do see it would be easier in a stacker as there is room from the secondary psu spot. Still means there's hot/warm air going into the case.

whoodiestyle

07-24-2006, 04:13 PM

lol soft modded my tt saprano 120mm top blow hole and intake on the side first time dremel used on the blowhole and holesaw on the side went a little crazy lol as you can i dont care really just gonna put the rig in my sig in there and give it to my little brother when my conroe rig is done also u can still see the pencil marks i made on the top for where it needs to go

http://img46.imageshack.us/img46/2628/pic00001wu6.jpg
http://img156.imageshack.us/img156/813/pic00002kf7.jpg

kempez815

07-26-2006, 09:38 AM

Here's mine:

http://www.overclock3d.net/thumb.php?id=1400 (http://www.overclock3d.net/image.php?id=1400)

http://www.overclock3d.net/thumb.php?id=1413 (http://www.overclock3d.net/image.php?id=1413)

Still isn't fully finished but I've been busy :stick:

Mebbe more pics later, but for now here's the project log: clickee (http://forum.overclock3d.net/showthread.php?t=4412)

A bit dirty now (needs a good scrub up) but here's the etching and the res with UV water :)

http://www.overclock3d.net/thumb.php?id=2134 (http://www.overclock3d.net/image.php?id=2134)

[G.N.U.]Fragman

07-28-2006, 12:14 AM

i have some ideas and stuff...but need something like the mesh on last page drawings....where to buy...perhaps a little tighter/smaller holes...i live en DK, so any hints of where to look for that ?

phelan1777

07-28-2006, 06:58 AM

Modders mesh at MNPCTECH.com

sells 1X1 and 1X2' sheets. It is steel so it has to be primed and painted after you get it how you want it.

havoxz

07-28-2006, 09:23 AM

Modders mesh at MNPCTECH.com

sells 1X1 and 1X2' sheets. It is steel so it has to be primed and painted after you get it how you want it.

the mesh isn't as see thru as proposed ? looks AWESOME in the drawn picture however, looks as tho one can see barely anything thru it (ie neons etc)
edit: my bad; i was looking at the ACRYAN website at their mesh; the mnpctech ones are a lot different however; wouldn't the larger holed mesh let more noise come out of the pc?
edit2: just noticed MNPCTECH is american? anyone know mod shops or places i can grab some of this stuff from in australia? (besides bunnings for paint/primer etc)

Phire

08-10-2006, 05:09 AM

Thought i'd post up a couple of pics. I got around to tidying cables in my case.

This was with cables a little tidied
http://img.photobucket.com/albums/v344/marantz/case1hdd.jpg

This was with some cutting and routing
http://img.photobucket.com/albums/v344/marantz/cutandmodded.jpg

Still trying to work out what i can do with the molex and floppy rail that plugs into board.

SparkyJJO

08-10-2006, 07:27 AM

I'm working on my own case mod here, (http://www.xtremesystems.org/forums/showthread.php?t=110148) once it is done I'll post the before and after pics in this thread :cool: It is my first attempt at some serious case modding so don't laugh too hard when it is finished ;)

Aftermath

08-10-2006, 10:14 PM

I'll post my case sometime all of your cases are kick a$$.:slapass:

powertrippin

08-10-2006, 11:14 PM

yo slacker!!

you sell those badboys or what? im looking for a new case... kinda sold on a silverstone Temjin... but your cases look balla!! let me know if you make cases for sale or such.

trip.

damsxx

08-11-2006, 01:30 PM

http://img147.imageshack.us/img147/5657/dsc02982largemv8.jpg
http://img147.imageshack.us/img147/6287/dsc02983largehu5.jpg
http://img137.imageshack.us/img137/9379/dsc02984largeej4.jpg
http://img147.imageshack.us/img147/6888/dsc02988largeoz8.jpg

[XC] moddolicous

08-11-2006, 07:53 PM

damsxx, what case is that? Thats a really nice case. (except the wiring mess).

drtitanium0

08-11-2006, 08:11 PM

damsxx, what case is that? Thats a really nice case. (except the wiring mess).
Looks like a pc 70plus with modded front and side pannels. Am I right???

NickS

08-11-2006, 08:16 PM

http://www.nickfire.com/photo/water/DSCF1444%20%28Medium%29.JPG

http://www.nickfire.com/photo/water/DSCF1454%20%28Medium%29.JPG

http://www.nickfire.com/photo/water/DSCF1457%20%28Medium%29.JPG

http://www.nickfire.com/photo/water/DSCF1458%20%28Medium%29.JPG

http://www.nickfire.com/photo/water/DSCF1459%20%28Medium%29.JPG

bigKr33

08-11-2006, 08:59 PM

Heres mine:

http://img223.imageshack.us/img223/9873/img1351kl3.th.jpg (http://img223.imageshack.us/my.php?image=img1351kl3.jpg)
http://img223.imageshack.us/img223/2108/img1348kw4.th.jpg (http://img223.imageshack.us/my.php?image=img1348kw4.jpg)

Clint

08-11-2006, 09:51 PM

..i'm using Sketchup,Illustrator and Photoshop for the sketches...
http://i7.photobucket.com/albums/y278/SlackerXL/tsunamiracing4.jpg

Excellent work on the sketches, would you be willing to share the "modules"?:)

With modules I mean the separate drawings/models for drives, rad, PSU, MB, wheels and so on...

I use UG, Pro engineer, CATIA and a few others and would love to have those modules for usage in my upcoming projects. It would not be too hard to convert them, I guess you have made them with proper measurements and so on..?

damsxx

08-11-2006, 10:52 PM

damsxx, what case is that? Thats a really nice case. (except the wiring mess).

thanks :)

lian li pc-7SE
with modded side panel
http://pc-cooling.de/fr/WATERCOOLING/Watercool/Radiateurs/300100785/Watercool+MO-RA+2+Pro+Radiator.html
http://pc-cooling.de/fr/WATERCOOLING/Watercool/Radiateurs/300100740/Watercool+Einbaublende+f%FCr+HTF2%25252F3+Single+R adiatoren.html

SlackerXL

08-12-2006, 12:18 AM

Excellent work on the sketches, would you be willing to share the "modules"?:)

With modules I mean the separate drawings/models for drives, rad, PSU, MB, wheels and so on...

I use UG, Pro engineer, CATIA and a few others and would love to have those modules for usage in my upcoming projects. It would not be too hard to convert them, I guess you have made them with proper measurements and so on..?

i'm glad you liked it
Here (scc.jazzle.co.uk) you can find a variety of sketchup computer related models
If you need something thats not there just pm me
i just might already have it

Clint

08-12-2006, 12:54 AM

i'm glad you liked it
Here (scc.jazzle.co.uk) you can find a variety of sketchup computer related models
If you need something thats not there just pm me
i just might already have it

Ahhhh, very very nice!:clap:

I've been looking for that kind of site.

Thank you very much!:D

[XC] moddolicous

08-12-2006, 10:03 AM

Looks like a pc 70plus with modded front and side pannels. Am I right???
good guess titanium. Wheres the pics of your case.

drtitanium0

08-12-2006, 11:13 AM

good guess titanium. Wheres the pics of your case.
Here they are:

http://img62.imageshack.us/img62/3396/computergallery061zs4.jpg

http://img62.imageshack.us/img62/2951/computergallery057eo9.jpg

http://img108.imageshack.us/img108/4545/computergallery041fm8.jpg

http://img108.imageshack.us/img108/7236/computergallery036zd0.jpg

I seriously have to do some wire mangement.

el rolio

08-12-2006, 09:48 PM

few pics of my case today. got fan in the way of my scweet cable management. oh well. its summer and im clockin!

http://revo21.com/revo+pc_cleanup/images/r3vo_lili_0806%20003.jpg
-
http://revo21.com/revo+pc_cleanup/images/r3vo_lili_0806%20006.jpg
-
http://revo21.com/revo+pc_cleanup/images/r3vo_lili_0806%20015.jpg
-
http://revo21.com/revo+pc_cleanup/images/r3vo_lili_0806%20017.jpg

iSlash

08-13-2006, 07:57 AM

Looks great!! ....tho I hate small cases=)

adamant415

08-13-2006, 05:38 PM

Just got my silencer 750 in. E6400 arrives tuesday, hoping for 3.2 ghz. Specs in sig.

http://www.xtremesystems.org/forums/attachment.php?attachmentid=50157&stc=1&d=1155515706
http://www.xtremesystems.org/forums/attachment.php?attachmentid=50158&stc=1&d=1155515706

iSlash

08-17-2006, 09:35 AM

deleted

iSlash

08-17-2006, 09:41 AM

Got my rig finished today! :banana: :banana: :banana: :woot:
http://images.people.overclockers.ru/preview/86151.jpg
(http://images.people.overclockers.ru/86151.jpg)

http://images.people.overclockers.ru/preview/86150.jpg
(http://images.people.overclockers.ru/86150.jpg)

http://images.people.overclockers.ru/preview/86149.jpg
(http://images.people.overclockers.ru/86149.jpg)

http://images.people.overclockers.ru/preview/86148.jpg
(http://images.people.overclockers.ru/86148.jpg)

http://images.people.overclockers.ru/preview/86147.jpg
(http://images.people.overclockers.ru/86147.jpg)

http://images.people.overclockers.ru/preview/86146.jpg
(http://images.people.overclockers.ru/86146.jpg)

http://images.people.overclockers.ru/preview/86145.jpg
(http://images.people.overclockers.ru/86145.jpg)

http://images.people.overclockers.ru/preview/86144.jpg
(http://images.people.overclockers.ru/86144.jpg)

http://images.people.overclockers.ru/preview/86143.jpg
(http://images.people.overclockers.ru/86143.jpg)

http://images.people.overclockers.ru/preview/86142.jpg
(http://images.people.overclockers.ru/86142.jpg)

http://images.people.overclockers.ru/preview/86141.jpg
(http://images.people.overclockers.ru/86141.jpg)

http://images.people.overclockers.ru/preview/86140.jpg
(http://images.people.overclockers.ru/86140.jpg)

http://images.people.overclockers.ru/preview/86139.jpg
(http://images.people.overclockers.ru/86139.jpg)

http://images.people.overclockers.ru/preview/86138.jpg
(http://images.people.overclockers.ru/86138.jpg)

OV3RCLOCK3R

08-17-2006, 10:09 AM

Thats a nice looking rig ^^ :)

faruquehabib

08-17-2006, 10:14 AM

i concur. well done!

NickS

08-17-2006, 10:18 AM

http://upload.nickfire.com//files/1/DSCF1508.JPG

Lt_JWS

08-18-2006, 09:09 PM

http://img96.imageshack.us/img96/2453/hpim0817fd6.th.jpg (http://img96.imageshack.us/my.php?image=hpim0817fd6.jpg)

http://img96.imageshack.us/img96/9417/hpim0818cf4.th.jpg (http://img96.imageshack.us/my.php?image=hpim0818cf4.jpg)

http://img93.imageshack.us/img93/500/hpim0820lk8.th.jpg (http://img93.imageshack.us/my.php?image=hpim0820lk8.jpg)

Here's my DD TDX64 on my conroe lol:
http://img93.imageshack.us/img93/4554/hpim0812cp9.th.jpg (http://img93.imageshack.us/my.php?image=hpim0812cp9.jpg)

LordofDoom

08-22-2006, 06:04 AM

My rig, crowded, but gets the job done:
http://i64.photobucket.com/albums/h169/jaadams1/Zach/PC/BiffJoens008.jpg
http://i64.photobucket.com/albums/h169/jaadams1/Zach/PC/BiffJoens007.jpg
http://i64.photobucket.com/albums/h169/jaadams1/Zach/PC/BiffJoens006.jpg
http://i64.photobucket.com/albums/h169/jaadams1/Zach/PC/BiffJoens005.jpg
http://i64.photobucket.com/albums/h169/jaadams1/Zach/PC/BiffJoens009.jpg
http://i64.photobucket.com/albums/h169/jaadams1/Joens.jpg
http://i64.photobucket.com/albums/h169/jaadams1/Biff001.jpg

Yeah, I love the keyboard. Readings for each core :)

-Satan

Baron

08-22-2006, 06:20 AM

Those fans are either strategically positioned or you have just lobbed them in there.

Phire

08-22-2006, 09:20 AM

GFX, Ram and maybe pwmic

alucasa

08-22-2006, 09:50 AM

http://img65.imageshack.us/img65/2313/img0517ic0.jpg

One storage PC in chenbro RM414 chassis.
Spec is
Pentium D940
some 2gb ram
4 300gb HDDs plus one 80gb OS hdd.

The right one is my current main rig in Lian-li PC-626 case.
Its spec is in my signature.

http://img246.imageshack.us/img246/4602/img0519rq3.jpg

My trusty firewall appliance.

http://img246.imageshack.us/img246/7619/img0520tz0.jpg

And my backup internet connection. I plan to completely change its routers later on. But for now, those will work.

Corner

08-22-2006, 10:40 AM

I only have a top pic of my case :)
http://corner.thuvienhoahoc.info/topX.JPG

heydo6

08-25-2006, 06:43 AM

islash that is a nice looking rig , great job . i was wondering if that case can hold dual psu , i ask cause i see yours is kinda sideways . thanks

iSlash

08-25-2006, 08:05 AM

heydo6
The PSU simply stands vertical. It isn't possible to but 2 PSUs... maybe only if you remake the case.=)

ElMoIsEviL

08-25-2006, 08:31 AM

silly me...
i thought you were talking about the intake-exhaust air volume equilibrium
:eek:

a dual rad does not warm that easily...
not even with a D955 on it
(provided you have a decent flow and an adequate pump for your setup)

so the air coming through it will not affect the system temp as much as you think

also, as you probably already know,
the air from the lower level (floor level) is always cooler and by warming it up
you force it to move upwards towards the exhaust fans...

i ve used this particular configuration in more than 15 cases the past few months
(most of them Stacker 830's without the side fan panel)
and the results were excellent despite the Greek summer temps :p:
the only thing you should do, is add two fan filters to the bottom fans because floor-level air intake tends to collect all the underlying dust
and reduces the rad's effectiveness really quick

There is a downside.. Dust, hair and other particles normally build up on the floor. They will be sucked up and will eventually clog the Rad. Which means a weekly/montlhy cleaning will be needed.

Anyways.. when I built up my case I opted for something different. What caught my eye was a VERY old Compaq Proliant 1500 server case. It housed a Pentium 100MHz with 128MB of ECC EDO memory and a total of 20GB of HD space in 5 seperate drives.. so yes.. quite old. It was also beige and disgusting looking.
http://www.ci.ru/inform2_97/p30_pic2.jpg

So I opted to try and turn it into a newish rig. Wasn't easy.. damn case was some oddity.. wasn't following any known specifications (not ATX, AT, baby ATX etc).
http://img.photobucket.com/albums/v51/ElMoIsEviL/Watercooling/Enterprise/DSC01976.jpg
http://img.photobucket.com/albums/v51/ElMoIsEviL/Watercooling/Enterprise/DSC01982.jpg
http://img.photobucket.com/albums/v51/ElMoIsEviL/Watercooling/Enterprise/DSC01987.jpg
http://img.photobucket.com/albums/v51/ElMoIsEviL/Work%20Area/DSC02023_resize.jpg
http://img.photobucket.com/albums/v51/ElMoIsEviL/Work%20Area/DSC02022_resize.jpg

iSlash

08-25-2006, 08:45 AM

ElMoIsEviL
Wow... massive thing. Big work ;)

Sanborn

08-25-2006, 08:52 AM

I think the first 15 or so pages where every single image is broken needs to be deleted or a new case gallery started. ;)

my comp will be up on this in about 30 days.

Bergo

08-26-2006, 01:11 AM

My baby @ Sask Place quite some time ago, figured I might as well post them, nothing has changed on it since then, it's the comp in my sig. custom phase change and a modified CM stacker.

http://www.seocc.net/Images/pics/show1.JPG

http://www.seocc.net/Images/pics/show2.JPG

http://www.seocc.net/Images/pics/show3.JPG

emaniac

08-27-2006, 06:13 AM

it's nothing special, but much cuting behind front and from right side :)
all air cooled and not planing to switch on water (maybe air+pelt later).

古強者死神

08-28-2006, 10:24 PM

Its from page 29 but there was a disscustion about the orange vs yellow slots on the DFI Ultra-D.

Yellow slots "can" be fore BH-5 looks like the focus on which slots to use are totally dependant on your bios, there are many diffrent revisions for each bios and each one has a diffrent focus on ram.

I have the stock bios on my mobo and use the yellow slots and it works perfect with my setup, had my OCZ Platinum 1:1 DDR600 stable with tight timings on my opteron 146, and I currently run my Mushkin DDR500 at DDR515 totally stable both were in the yellow slots.

I never updated to a newer bios as the saying goes "if it aint broke dont fix it"

I have more pictures on my home PC of my rig, but now that I am at work I can only share some of the ones I had uploaded in the past.

Bear with the bad photo quality, my camera died on me.

http://www.photodump.com/direct/VciousXUSMC/new1p-T.jpg (http://www.photodump.com/viewer/VciousXUSMC/new1p.html)

http://www.photodump.com/direct/VciousXUSMC/new3p-T.jpg (http://www.photodump.com/viewer/VciousXUSMC/new3p.html)

http://www.photodump.com/direct/VciousXUSMC/new2p-T.jpg (http://www.photodump.com/viewer/VciousXUSMC/new2p.html)

http://www.photodump.com/direct/VciousXUSMC/new5p-T.jpg (http://www.photodump.com/viewer/VciousXUSMC/new5p.html)

http://www.photodump.com/direct/VciousXUSMC/frontnew-T.jpg (http://www.photodump.com/viewer/VciousXUSMC/frontnew.html)

http://www.photodump.com/direct/VciousXUSMC/sidenew-T.jpg (http://www.photodump.com/viewer/VciousXUSMC/sidenew.html)

http://www.photodump.com/direct/VciousXUSMC/new4p-T.jpg (http://www.photodump.com/viewer/VciousXUSMC/new4p.html)

http://www.photodump.com/direct/VciousXUSMC/new6p-T.jpg (http://www.photodump.com/viewer/VciousXUSMC/new6p.html)

http://www.photodump.com/direct/VciousXUSMC/new7p-T.jpg (http://www.photodump.com/viewer/VciousXUSMC/new7p.html)

Some of the Mods:

installing a 120mm fan in the front, yes that was cut with a dremel /bow
http://i11.photobucket.com/albums/a177/ViciousXUSMC/thehole.jpg

fans in
http://i11.photobucket.com/albums/a177/ViciousXUSMC/frontfan.jpg

moded that mesh front into this cool dragon
http://i11.photobucket.com/albums/a177/ViciousXUSMC/frontbez.jpg

final product: this cool turbine looking fan behind a dragon, at a later time I may actualy get a turbine fan off xoxide.com with the led's in it wich will bring it out even more.
http://i11.photobucket.com/albums/a177/ViciousXUSMC/fananddragon.jpg

More may be uploaded later inluding the 120mm fan on the top of the case that I moded in. I didnt take any pictures of when I had to mod the case for my psu as I was in a hurry to get it up and running and it was the last thing on my mind.

You can kinda see the many phases the computer went thru when I swiched out the psu and things, I dont even have a photo of the final product when I had got all the wires put away, you dont see any wires now except the fan I have near the pwm ic's and the black lights. All the psu wires are behind the hdd cage and hidden away looks nice and neat.

Just recently added the x-fi in there and its offically a FULL case the pump barly fits at an angle between the sound card and the hdd cage, while the video card is just above it. I love the case to death with its price and options but next time I may get somthing bigger.

Vice

08-28-2006, 10:58 PM

I am very happy to say the case is finally done. The only thing left to do is prop it up off the ground, maybe put it on wheels, not sure yet.

but here it is !!

http://img.photobucket.com/albums/v603/MrMage/P8291051.jpg
http://img.photobucket.com/albums/v603/MrMage/P8291049.jpg
http://img.photobucket.com/albums/v603/MrMage/P8271045.jpg
My start up switch.
http://img.photobucket.com/albums/v603/MrMage/P8271046.jpg
http://img.photobucket.com/albums/v603/MrMage/P8291047.jpg

I havent gotten a chance to mount my start up switch yet but, itll be done soon enough.

Also need to do more cable management.. but thats for another day.

what do you guys think?

P.S. This thing is HEAVY!!!

Sanborn

08-29-2006, 12:43 PM

^^ that case must weigh 100 lbs, but it looks awesome.

I agree with you, a lot more cable management needs to be done but it looks like you have put a TON of work into it.

bravo dude

DeToNaToR.cl

08-29-2006, 12:58 PM

cable managment will do great

drtitanium0

08-29-2006, 03:33 PM

Yea nice rig man!

NickS

08-29-2006, 03:42 PM

Brought my rad from outside of my case into it, and heres how it looks now.

http://upload.nickfire.com//files/1/radinternal%20003_thumb.jpg
(http://upload.nickfire.com//files/1/radinternal%20003.jpg)

http://upload.nickfire.com//files/1/radinternal%20004_thumb.jpg
(http://upload.nickfire.com//files/1/radinternal%20004.jpg)

SamHughe

08-29-2006, 04:33 PM

Brought my rad from outside of my case into it, and heres how it looks now.

Looks really nice. Loved the color scheme.

Question: Does that fan cover/filter thingy restrict air flow? If not, where can I get those?

thanks

NickS

08-29-2006, 04:58 PM

Nope, works great :). It really does filter dust too, after a few days you can wipe your hand over it and a crap load of dust comes off.

Performance-pcs.com has them. FilterRight I think makes them. :)

SamHughe

08-29-2006, 11:05 PM

lawrywild

08-30-2006, 05:40 PM

Got my first Lian Li today :D

Better pics tomorrow. I love it, makes my old super lanboy look like complete tat..

http://img114.imageshack.us/img114/2831/dscf0028wr7.jpg

http://img178.imageshack.us/img178/8015/dscf0020py2.jpg

nike

08-31-2006, 12:01 AM

upgraded to new case :D looks uber w/ ma room.. here it is :P
http://www.xtremesystems.org/forums/attachment.php?attachmentid=50741&stc=1&d=1157007640
edit// hmz, need 2 learn how 2 post images only once lol ..sry

TheMaster

09-04-2006, 02:46 PM

http://img150.imageshack.us/img150/6619/bild0228og.jpg

http://img150.imageshack.us/img150/162/bild0186yq.jpg

Aplus X-Blade fresh out of the Box ^^

Anarchy

09-05-2006, 10:18 AM

My "Workstation" -

Lights on :

http://img373.imageshack.us/img373/3582/cm201hell2uy2.jpg

http://img393.imageshack.us/img393/5987/cm201hellgd2.jpg

http://img373.imageshack.us/img373/9281/cmfullwindowao0.jpg

Lights off :

http://img373.imageshack.us/img373/4840/cm201uv2hk0.jpg

http://img379.imageshack.us/img379/7349/cm201uv3pr3.jpg

http://img379.imageshack.us/img379/6814/cm201uveg2.jpg

Details :

http://img383.imageshack.us/img383/1816/cmgtxwx0.jpg

http://img222.imageshack.us/img222/7474/cmlaingbw5.jpg

http://img383.imageshack.us/img383/405/cmnexxxoslr4.jpg

SlackerXL

09-05-2006, 10:32 AM

very clean looking rig you've got there Anarchy....
nice wc setup and cable management
despite the limited space... :)

FEEXX

09-05-2006, 01:13 PM

nice cable management congrats!

Knapman

09-13-2006, 05:36 PM

GAH! Anarachy your setup is one of the nicest Ive seen. I love the pic of the case with the reflection of your lcd. :p

iSlash

09-19-2006, 09:33 AM

It really roxxx!

scream

09-20-2006, 06:28 AM

okay this is mine... back on stock cooler... changed my rams...

http://i30.photobucket.com/albums/c338/timpal/P1020845.jpg

http://i30.photobucket.com/albums/c338/timpal/P1020847.jpg

http://i30.photobucket.com/albums/c338/timpal/P1020848.jpg

Knapman

09-20-2006, 01:10 PM

Two questions:

1. What case is that?
2. What theme do you have for windows, the task bar looks silver...:s

Sanborn

09-20-2006, 01:18 PM

Two questions:

1. What case is that?
2. What theme do you have for windows, the task bar looks silver...:s

I'm pretty sure thats the standard silver setting in Win XP.

el rolio

09-20-2006, 01:44 PM

I'm pretty sure thats the standard silver setting in Win XP.

qft :stick:

scream

09-20-2006, 07:57 PM

Two questions:

1. What case is that?
2. What theme do you have for windows, the task bar looks silver...:s

1. SilverStone TJ-04
2. WinXp Standard Theme

Roger_D25

09-23-2006, 08:47 PM

Anarchy,
Great case, it looks like your running 1/2" ID lines? If so where the heck did you find all those quick-connect fittings? I'm also using all 1/2" ID tubing but have yet to find any decent fittings like yours for anything larger than 1/4" or 3/8" ID? By the way where is your radiator? I take it it's mounted on the back of case or mounted outside case separelty? Thanks for all the info, much apprecaited!

To get the Silver color scheme just right click on the desktop and click on properties. Then go to the appearance tab, under that tab go down to Color Scheme and click on Silver, I think it looks much better than default WinXP colors.

ANP !!!

09-25-2006, 02:31 AM

I think its a 3/8"... right ??

chensen78

09-25-2006, 04:39 AM

minimalist

http://img156.imageshack.us/img156/3662/p3300004ua3.jpg

iSlash

09-27-2006, 04:13 AM

Great case. Good sistem. Poor look=\ Do some cable managment and get rid of that crapy ATA-cable (that you got with your MB :D ) !!!!!Good luck;)

ANP !!!

09-27-2006, 05:31 AM

Nice. But it need a little Cable Management.

Sanborn

09-28-2006, 01:34 PM

:pimp:

See sig for specs, I also have hawt red cathode to put inside that I haven't gotten around too yet.

reminder: this case will probably be behind my monitor, its currently location is temporary.

http://img515.imageshack.us/img515/7140/ultracomputerdone004en3.jpg
http://img380.imageshack.us/img380/8695/ultracomputerdone008fs2.jpg
http://img516.imageshack.us/img516/2719/ultracomputerdone007bb3.jpg
http://img246.imageshack.us/img246/5116/ultracomputerdone015ov6.jpg

Still have yet to manage the wires a bit more

bullet2urbrain

09-28-2006, 02:04 PM

judging by the TI- series calc i'd say he's an engineer :D

Looks good Sanborn..... maybe soon mine will be done and i can post pictars

iSlash

09-29-2006, 02:31 PM

Sanborn
Looks very clean! I like it;)

OV3RCLOCK3R

09-29-2006, 05:57 PM

Some pics of my Rig.........

Black Widow: :D
http://img143.imageshack.us/img143/3396/dscf2425ad6.jpg

http://img146.imageshack.us/img146/27/dscf2426hx7.jpg

http://img220.imageshack.us/img220/4748/dscf2427gi5.jpg

http://img146.imageshack.us/img146/7007/dscf2428cm9.jpg

http://img220.imageshack.us/img220/2508/dscf2429qx1.jpg

http://img136.imageshack.us/img136/5773/dscf2430nv4.jpg

Watercooling coming soon ;)

SparkyJJO

09-29-2006, 06:02 PM

NickS

09-29-2006, 06:21 PM

Overclocker seriously, your rig is one of the best rigs I've ever seen. Like top 3 for me. It's so close to #1. Watercooling would make it #1, thats how much I like it.

OV3RCLOCK3R

09-29-2006, 06:25 PM

nice. How's that AC Ryan fan working out for you noise and airflow-wise? Are they outright lying or are they pretty close to real specs?

I was wary of them after reading a review on how fast they broke down...

The fan is excellent, No complaints so far. Bit loud at 12v but pushes a lot of air aswell :)

Overclocker seriously, your rig is one of the best rigs I've ever seen. Like top 3 for me. It's so close to #1. Watercooling would make it #1, thats how much I like it.

Thanks Nick, I guess i'll be #1 in your list very very soon then ;)

HeavyH20

09-29-2006, 06:48 PM

OV3RCLOCK3R, that is a very clean build. :up:

My current build until the Kentfields are available.

http://img150.imageshack.us/img150/92/frontnt8.jpg

http://img227.imageshack.us/img227/9356/inside2hc4.jpg

http://img150.imageshack.us/img150/6902/inside4wp1.jpg

http://img227.imageshack.us/img227/8381/inside5su5.jpg

http://img132.imageshack.us/img132/3196/fansli3.jpg

NickS

09-29-2006, 06:53 PM

Wow another awesome build! MSI mobo too :D:D:D.

rpg711

09-29-2006, 07:12 PM

OV3RCLOCK3R

09-29-2006, 07:41 PM

OV3RCLOCK3R, that is a very clean build. :up:

Thank you Heavy20

Impressive rig you got there yourself ;):)

HeavyH20

09-29-2006, 07:48 PM

holy mother of god... how many arctic cooling 120mms did u fit in there

There are four on the door. Two push and two pull. There is the standard ones at the front and back. The ones on the panel run at 50% speed (750 RPM) so there are not noisy. I can still here the hard drives clicking away ;)

Thank you Heavy20

Impressive rig you got there yourself ;):)

Thanks. Hard sitting on the sidelines while the Conroes are out. But, waiting to build a G80 SLI system on a 590 SLI board with a Kentsfield CPU helping push the pixels along. Bought a 30 inch LCD instead, for now.

OV3RCLOCK3R

09-29-2006, 07:54 PM

There are four on the door. Two push and two pull. There is the standard ones at the front and back. The ones on the panel run at 50% speed (750 RPM) so there are not noisy. I can still here the hard drives clicking away ;)

Thanks. Hard sitting on the sidelines while the Conroes are out. But, waiting to build a G80 SLI system on a 590 SLI board with a Kentsfield CPU helping push the pixels along. Bought a 30 inch LCD instead, for now.

I wish i had as much money as you. Oh well, can't blame, i'm only 16:stick:

I'm sure you worked very hard for your money and enjoy it while it lasts :toast:

nhenhophach

09-29-2006, 08:08 PM

My Case

http://img145.imageshack.us/img145/3890/1hh3.jpg
http://img145.imageshack.us/img145/4081/8fw4.jpg
http://img228.imageshack.us/img228/2703/35cn4.jpg
http://img228.imageshack.us/img228/1527/36tl4.jpg

SparkyJJO

09-29-2006, 09:09 PM

I wish i had as much money as you. Oh well, can't blame, i'm only 16:stick:

I'm sure you worked very hard for your money and enjoy it while it lasts :toast:
you're only 16 and have a rig like that? And plan to go WC soon? :slobber: Seems you have more money than I do and I'm 19. Heck enjoy it while it lasts though, money gets tight during college :(

HeavyH20

09-29-2006, 09:15 PM

College was 15 years ago for me ;)

And, I have to agree. That is a very nice system for someone as young as 16.

SparkyJJO

09-29-2006, 10:06 PM

Anyone want to donate about $650 for an awesome watercooling system and case for me? :p:
Or how about $300, to just put some more a little more basic watercooling in my current case :D

When I do finally get the funds to get this watercooling loop and case I want - heck or even if I get enough to watercool what I've got now - I'll definitely post pics here. Though I don't think I can compete with some of these masters. You guys are great, give me inspiration and a reason to spend money I don't have :D
That's a compliment BTW, it usually takes quite a bit to make me spend money I don't have ;)

In the meantime, once I get some better wire management done I'll snap a few pics of my current system as it stands air-cooled. Right now it is a little sloppy inside ever since removed the HD rack and rubbermounted the drive in a 5.25" bay.

BTW, the case I want to watercool is a secret, I'm not telling cuz I want to be the first to do it :D

OV3RCLOCK3R

09-30-2006, 09:39 AM

you're only 16 and have a rig like that? And plan to go WC soon? :slobber: Seems you have more money than I do and I'm 19. Heck enjoy it while it lasts though, money gets tight during college :(

I'm already at college ;) but due to me getting EMA and having a job, i haven't run into any money problems yet (touches wood) so am able to afford a rig like that along with watercooling :)

College was 15 years ago for me ;)

And, I have to agree. That is a very nice system for someone as young as 16.

Thanks :)

rpg711

10-01-2006, 04:47 AM

There are four on the door. Two push and two pull. There is the standard ones at the front and back. The ones on the panel run at 50% speed (750 RPM) so there are not noisy. I can still here the hard drives clicking away ;)

Thanks. Hard sitting on the sidelines while the Conroes are out. But, waiting to build a G80 SLI system on a 590 SLI board with a Kentsfield CPU helping push the pixels along. Bought a 30 inch LCD instead, for now.
JESUS CHRIST 4????!!!#%!@@!#@%!@
whats the point of having two push two pull... u have an exhaust
all 4 i think is better for all push, that should raise pressure in case
then the fans iwll spinn faster invouluentarily, but be at same dba

biohead

10-03-2006, 12:19 PM

handmade by me

http://members.lycos.nl/simz4ever2/rig/new/3d.jpg
http://members.lycos.nl/simz4ever2/rig/new/front.jpg
http://members.lycos.nl/simz4ever2/rig/new/front_close.jpg
http://members.lycos.nl/simz4ever2/rig/new/front_intake.jpg
http://members.lycos.nl/simz4ever2/rig/new/inside.jpg

nice flashy red at night :toast:

أشرف

10-03-2006, 12:31 PM

What the :banana::banana::banana::banana:? That's doooooope, biohead! :slobber:

biohead

10-03-2006, 02:20 PM

Don't flatter me :$

like your sig dude!

YanBooth

10-03-2006, 05:33 PM

I have a fan setup just like that on my video card :).. Cept' I used more zip-ties.

handmade by me

http://members.lycos.nl/simz4ever2/rig/new/inside.jpg

nice flashy red at night :toast:

Very nice job! Ever thought about spray painting the wood a good color to go with the aluminum framing? That with the lights, could look really good...

Keep up the great work

-yan

biohead

10-04-2006, 07:12 AM

korby

10-05-2006, 02:28 PM

Here (http://insanepc.evonet.ro/forum/index.php?topic=49) you can find some pictures with what i acheved today. Sorry, but the forum is in romanian.

One picture is better than 1000 words. :fact:

GAM

10-05-2006, 03:03 PM

I thought of it - but nah, it's a very hard job to do and besides I personally like the look of raw wood; it's kinda unique when it comes to pc-cases :) The only things I might paint are the two 5.25" -> 3.5" converters of the floppydrive and fancontroller. I'd either paint them totally black or aluminium, so it matches.
You are going to put a clear finish or rub in some oil or something at least aren't you? It'll get grubby very quickly otherwise.

It really doesn't look 'finished' without a suitable finish. ;)

GAM

10-05-2006, 03:08 PM

My recent case mods - side panel window, front bezel:
More pics etc here: http://xtremesystems.org/forums/showthread.php?t=118203
http://www.gam.net.au/mods-main/sneakpeek/images/CIMG3964.5.a.crp.jpg

LordofDoom

10-05-2006, 03:48 PM

At my age, one wonders how I can afford my rig with no support from parents :)
http://i64.photobucket.com/albums/h169/jaadams1/Casemodgallery1002.jpg

Temps are 20C Idle and 24C Max Full Load @ Dual Prime95

-Satan

Oh yeah, and ignore those curtains, my parents are too lazy to pay for new ones, and this used to be my brother's baby room :D

Roger_D25

10-05-2006, 05:59 PM

Hey Satan,
I didn't know you were a member over here. Nice to see you posted some shots of your rig. By the way how old are you just curious, lol! I'll bet 17 or 18?

LordofDoom

10-05-2006, 06:47 PM

Try 14. :P
http://i64.photobucket.com/albums/h169/jaadams1/Picture005.jpg
There's a picture of me and my l33t shirt, for those of you rapists who want to sodomize me (lol!). (**Hint** Curly haired one in the back.) Eww, sodomize.
I just got a new case for my rabbit/computer :)
http://i64.photobucket.com/albums/h169/jaadams1/Casemodgallery1001.jpg

-Satan

heads_up

10-05-2006, 07:16 PM

Good to see more G3D members over here

Btw ive been a member here 4 ages... just cant be bothered posting

Edit:

http://img85.imageshack.us/img85/2008/dsc00416rl1.jpg

http://img218.imageshack.us/img218/662/dsc00421bf4.jpg

Im only 15 btw and i paid for everything in my rig, not to mention everything else I own (TV, stero's, i even paid for my bed dude)

LordofDoom

10-05-2006, 07:26 PM

Agreed Heads_up. I'm in the same boat, one year younger. My furniture is paid for (that's why I used Ikea, plus, I like DIY). Nice rig tho. Is that a SI-128? It looks like Thermalright, but I've only seen the XP-90 and the Ultra-90/Ultra-120.

heads_up

10-05-2006, 07:27 PM

Btw, i just ordered this new Lian Li case and it should be here soon, i cant wait to mod it. Its silver so ima paint the inside black, then mod the top fan from 80mm to 120mm, then... well ill go from there...

heads_up

10-05-2006, 07:28 PM

It looks like Thermalright, but I've only seen the XP-90 and the Ultra-90/Ultra-120.

ya, its a XP-90

alucasa

10-05-2006, 08:40 PM

iSlash

10-07-2006, 04:10 AM

alucasa
I like youre style maaan (c)

rpg711

10-08-2006, 05:46 PM

http://img216.imageshack.us/img216/5093/img0704bk4.jpg

My current setup.

The 3U rig is my main.
The 4U is Network storage rig.

Both are Chenbro rackmount chassis.

As the little sticker shows, the 4U rig's powered by AMD X2 cpu.
Spec of the 3U is in my signature.
thats alot of harddrives...
@headsup:
why did u put cold cathodes in there? they are wasting money if ur poor like me and is a teen (like u said)
its not like a beauty contest, i would have replaced all those cathodes, fancy lights, and fancy cooling for a nice full-watercooling custom built setup
but thats just me :p:

heads_up

10-08-2006, 05:58 PM

@headsup:
why did u put cold cathodes in there? they are wasting money if ur poor like me and is a teen (like u said)
its not like a beauty contest, i would have replaced all those cathodes, fancy lights, and fancy cooling for a nice full-watercooling custom built setup
but thats just me :p:

Meh, I wanted to have stuff glow, i dont really like them anyway, they look rude... i dnt know i might rip them out and resell them.

rpg711

10-08-2006, 06:08 PM

Meh, I wanted to have stuff glow, i dont really like them anyway, they look rude... i dnt know i might rip them out and resell them.
really... thats a good idea
u can say this on ebay
RARE BLUE COMPUTER GLOW LAMP! VERY COOL!!!

alucasa

10-09-2006, 12:51 AM

alucasa
I like youre style maaan (c)

Thanks, rackmount is my style & passion.

Xion X2

10-10-2006, 12:19 AM

GAM--I like your case. Nice, man.

Here's mine. Standard air for now, but I'm going watercooling with a Conroe build very soon.

AMD X2 4400+ @ 2.6gHz
Nvidia 7900GTX @ 720/1740
OCZ Platinum DDR500

http://www.nvnews.net/vbulletin/attachment.php?attachmentid=20771&d=1159764082
http://www.xtremesystems.org/forums/attachment.php?attachmentid=51797&d=1160464748
http://www.xtremesystems.org/forums/attachment.php?attachmentid=51798&d=1160465070
http://www.nvnews.net/vbulletin/attachment.php?attachmentid=20798&stc=1&d=1159846104

GAM

10-10-2006, 01:14 AM

Thanks mate. I'm working on a website and related things at the moment, but hopefully I will have some updates, pics and guidance coming soon.

Is your 120mm up front getting ready for WC or providing more air into the case?

You got some cable management to do there, eh ;)

Xion X2

10-10-2006, 09:14 AM

Is your 120mm up front getting ready for WC or providing more air into the case?

You got some cable management to do there, eh ;)

Just more air. The Conroe build I'm working on is an entirely different setup that will be liquid-cooled. The front Sunon you see in that pic has an airflow rating of 84cfm and helps keep my X2 idle @ 29c.

I'm afraid the cables are about as good as they're going to get unless you have any ideas that exclude stuffing them behind the motherboard. There's no room behind it in this case, and the PSU I'm using isn't modular. I also have 3 case fans.

GAM

10-10-2006, 01:53 PM

Just more air. The Conroe build I'm working on is an entirely different setup that will be liquid-cooled. The front Sunon you see in that pic has an airflow rating of 84cfm and helps keep my X2 idle @ 29c.

I'm afraid the cables are about as good as they're going to get unless you have any ideas that exclude stuffing them behind the motherboard. There's no room behind it in this case, and the PSU I'm using isn't modular. I also have 3 case fans.
Bummer re cable management. What if you cut some holes/slots in the MB tray, you can't lie the cables flat? Anyway, I understand.

My old (and original self-built) PC suffered a lot too. As much as I tried I couldn't get it much better. Particularly hard given there were 4 HDs, 2 CDROMS, a few PCI cards and a mid tower case ;).

GAMbox (SkyHawk Aluminium Case-pics 2yrs old and first ever mods):
http://www.gam.net.au/pcmods/skyhawk/images/GAMbox-finished-mods-collag.jpg
http://www.gam.net.au/pcmods/skyhawk/images/GAMbox-raw-mods-collage.jpg

I've since gotten rid of the 'stealthed 5.25" drives' as I don't do a very good job (velcro only) and they'd catch from time to time. I've improved cable management since, somewhat :rolleyes:. When I did all the cable tying and arranging, I felt pretty about it. Expectations have changed since then ;). Will have to pull out a recent pic.

Xion X2

10-11-2006, 09:08 AM

There's just no room behind the motherboard tray to stuff the cables. The space is that thin. I can't even lay them flat, because I can't re-attach the other side of my case. I'll keep thinking and see if I can come up with something.

Another nice case you have there. I like that design on the side window a lot.

iSlash

10-11-2006, 10:26 AM

Xion X2
I'm thinkin' of one word now - neet!
Silver/black+green is a really rare variation!

AMD_Deluxe

10-11-2006, 03:08 PM

http://img526.imageshack.us/img526/5452/1ed1.th.jpg (http://img526.imageshack.us/my.php?image=1ed1.jpg)
http://img70.imageshack.us/img70/9295/2eg2.th.jpg (http://img70.imageshack.us/my.php?image=2eg2.jpg)
http://img526.imageshack.us/img526/8325/3vy6.th.jpg (http://img526.imageshack.us/my.php?image=3vy6.jpg)
http://img70.imageshack.us/img70/4505/4yq6.th.jpg (http://img70.imageshack.us/my.php?image=4yq6.jpg)
http://img129.imageshack.us/img129/1399/5hw0.th.jpg (http://img129.imageshack.us/my.php?image=5hw0.jpg)+
http://img129.imageshack.us/img129/4029/6mo8.th.jpg (http://img129.imageshack.us/my.php?image=6mo8.jpg)
http://img129.imageshack.us/img129/6770/7jv9.th.jpg (http://img129.imageshack.us/my.php?image=7jv9.jpg)

Update*

I got already a new psu ( liberty 500w ) ... the liberty got a better cable management

GAM

10-11-2006, 04:04 PM

Nice work, very neat.

I like your use of the sound insulating material on the drive cages. If I have identified correctly.

Xion X2

10-11-2006, 10:38 PM

Xion X2
I'm thinkin' of one word now - neet!
Silver/black+green is a really rare variation!

Thanks, man. It really could look a lot better if I could find somewhere to stuff those extra cables going everywhere. I really tried to clean it up, but there's just no room in this case. Maybe I'll try again soon.

Xion X2

10-11-2006, 10:44 PM

Is the Scythe Mine on Deluxe's case made to point that way? You would think it should be pointed toward the exhaust fan.

AMD_Deluxe

10-12-2006, 05:10 AM

thats because the socket of the dfi is vertical !

ANP !!!

10-12-2006, 06:07 AM

Xion X2, AMD_deluxe, Gam.. Very NEAT n Clean cases.. i hope i had one of those.. :slap:

Xion X2

10-12-2006, 08:27 PM

Thanks, man. That's a real compliment coming from some guys on this forum, because I feel that mine pales in comparison to most of yours. :)

bluep3ace

10-18-2006, 03:42 PM

<images snipped>
Update*

I got already a new psu ( liberty 500w ) ... the liberty got a better cable management
Is your case out of production?

squilliam

10-23-2006, 06:56 PM

This is mine. I personally hand sanded it and later gave it a clear coat.
http://i24.photobucket.com/albums/c38/N00d13/Home/P1010062.jpg
And yes.. that is a USB hub attached to the top.
I am thinking of later modding it to fit inside.
http://i24.photobucket.com/albums/c38/N00d13/Home/P1010075.jpg

http://i24.photobucket.com/albums/c38/N00d13/Home/P1010076.jpg

http://i24.photobucket.com/albums/c38/N00d13/Home/right-side.jpg

SparkyJJO

10-23-2006, 08:14 PM

That is a very unique look!

GumisPeter

10-24-2006, 03:22 AM

Hi all!

My case:Antera Type 325

Spec:
Antera 10,5 x 23" ,
Glass 620x10mm dark grey,
NorthQ 120mm, (2)
Raidsonic Icy Box 351,
P5LD2 Deluxe, Intel Pentium D-945 ,
Thermaltake Blue Orb II , A-Data DDR2 667-2GB ,
Leadtek PX7900 GT TDH 256MB 450/1320 ,
Zalman 900-CU led , Maxtor 6V300F0 Sata II 300Gb , LG GSA-4163B ,
Enermax Liberty 500W

...and much work....

http://www.computermode.hu/forum/uploads/1155679799/gallery_3_138_141642.jpg
http://www.computermode.hu/forum/uploads/1155679799/gallery_3_138_80378.jpg
http://www.computermode.hu/forum/uploads/1155679799/gallery_3_138_67599.jpg

http://www.techpowerup.com/gallery/400

Bye

Rmrdr13

10-24-2006, 04:45 AM

How do you get it to not roll around and fall off your desk? Looks pretty unstable.

ANP !!!

10-24-2006, 06:04 AM

How do you get it to not roll around and fall off your desk? Looks pretty unstable.

Yeah That :slap:

iSlash

10-24-2006, 06:16 AM

GumisPeter
OMG... I've seen mods like this before, but this is the best! how much time have U spent on it!?

Re$pect! :beer:

squilliam

10-24-2006, 08:07 AM

Thank you Sparky!

I am always looking for ideas on how to make it more personalized.
If you have anything that isn't a stupid joke or bash, then
either PM me or let me know in here.

I am thinking of adding a sweet looking power splitter
to it and mybe even a router. This is getting me pretty geeked.
I will probably get to work on the router, power splitter, and
USB hub after I purchase (and install) my Proc this weekend.

AMD_Deluxe

10-25-2006, 07:23 AM

Got a new Case ....

http://img190.imageshack.us/img190/6949/1vh4.th.jpg (http://img190.imageshack.us/my.php?image=1vh4.jpg)http://img155.imageshack.us/img155/3677/2vp7.th.jpg (http://img155.imageshack.us/my.php?image=2vp7.jpg)
http://img190.imageshack.us/img190/9004/3ju3.th.jpg (http://img190.imageshack.us/my.php?image=3ju3.jpg)http://img266.imageshack.us/img266/5373/4ws1.th.jpg (http://img266.imageshack.us/my.php?image=4ws1.jpg)

GumisPeter

10-25-2006, 08:40 AM

How do you get it to not roll around and fall off your desk? Looks pretty unstable.

Hi!

http://www.kepfeltoltes.hu/061025/K_p_005_www.kepfeltoltes.hu_.jpg

Xion X2

10-26-2006, 09:55 AM

GumisPeter--that rocks, bro!

bball4ever39

10-26-2006, 10:26 AM

That awesome :clap:

scream

10-26-2006, 10:31 AM

Nazu

10-28-2006, 01:43 PM

Here are pics of my case:
1 (http://koti.mbnet.fi/nazu/Kone/Kone/koppa1.jpg)
2 (http://koti.mbnet.fi/nazu/Kone/Kone/koppa2.jpg)
3 (http://koti.mbnet.fi/nazu/Kone/Kone/koppa3.jpg)

Xion X2

10-30-2006, 02:15 PM

^ Nice and neat, Nazu. Looks good.

Baron

10-31-2006, 06:09 AM

Here is my PC

I will get some pics of it in the dark when it becomes dark.

Lights on

http://img522.imageshack.us/img522/7586/pict0076na0.jpg

Lights off

http://img269.imageshack.us/img269/2665/pict0077ho7.jpg

Here be my desk.

http://img505.imageshack.us/img505/8181/pict0072zf0.jpg

Nazu

10-31-2006, 06:21 AM

Nice window :D It sure looks homemade.

Baron

10-31-2006, 06:33 AM

Nice window :D It sure looks homemade.

Thanks. Shuold have got a few to practice on before I did it properly really. But it doesnt matter.

Nazu

10-31-2006, 07:55 AM

Thanks. Shuold have got a few to practice on before I did it properly really. But it doesnt matter.
It would look better if you could grind those edges with some sandpaper or something else. But I respect people who have even some skill and make things themselves :)

flavoraid

10-31-2006, 08:59 PM

crazy rim case , nice wire job on the stacker

TSXmike

11-01-2006, 01:30 AM

nothing special...

http://i5.photobucket.com/albums/y184/blackaccordlx/IMGP05582.jpg

iSlash

11-04-2006, 04:24 AM

TSXmike
nothing special...
If you wanted a compliment - here you go:
Your setup looks simply amazing! I really like the colors!

PS: How loud is everything?

TSXmike

11-05-2006, 12:57 PM

TSXmike

If you wanted a compliment - here you go:
Your setup looks simply amazing! I really like the colors!

PS: How loud is everything?

thanks for the compliment! its actually pretty quiet, dont know really how to describe it...

biohead

11-05-2006, 01:21 PM

It would look better if you could grind those edges with some sandpaper or something else. But I respect people who have even some skill and make things themselves :)
See page 34 :)

Equil|briuM

11-14-2006, 02:36 AM

http://i11.photobucket.com/albums/a182/ZZRiddick/DSC00037.jpg

Will get some more Detailed picts soon. (Phone pict)

p0tter

11-15-2006, 07:06 PM

Antec P160
http://images19.fotki.com/v19/photos/5/570044/2183309/IMG_9036-vi.jpg (http://public.fotki.com/timothywangerin/nerd_stuff/img9036.html)
http://images19.fotki.com/v19/photos/5/570044/2183309/IMG_9032-vi.jpg (http://public.fotki.com/timothywangerin/nerd_stuff/img9032.html)

Antec NSK2400
http://images18.fotki.com/v25/photos/5/570044/2183309/IMG_8563-vi.jpg (http://public.fotki.com/timothywangerin/nerd_stuff/img_8563.html)

http://images18.fotki.com/v340/photos/5/570044/2183309/IMG_8559-vi.jpg (http://public.fotki.com/timothywangerin/nerd_stuff/img_8559.html)

hmammen

11-17-2006, 10:32 AM

http://img135.imageshack.us/img135/6927/10206757pfel2.jpg (http://imageshack.us)
http://img388.imageshack.us/img388/9701/10206800kmkx0.jpg (http://imageshack.us)

heads_up

11-17-2006, 11:26 PM

http://headsup.dajoob.com/Computer%20Pictures/DSC00721.JPG

iSlash

11-19-2006, 03:34 AM

Made a rig for my friend. Armor JR, red (pinky :D ) neon with sound control, paxmats, 2*120@5V TT Thunderblades, TT ST, etc.

http://images.people.overclockers.ru/preview/99254.jpg (http://images.people.overclockers.ru/99254.jpg)

http://images.people.overclockers.ru/preview/99255.jpg (http://images.people.overclockers.ru/99255.jpg)

http://images.people.overclockers.ru/preview/99253.jpg (http://images.people.overclockers.ru/99253.jpg)

CH3CH2OH

11-21-2006, 03:31 PM

hi everyone:)
this is my little case...i think btx is better than atx.

http://img155.imageshack.us/img155/4765/p1030530zo6.jpg

and this is commander HQ :cool:

http://img155.imageshack.us/img155/1899/p10305271gv3.jpg

computerman0416

11-21-2006, 03:36 PM

fornowagain

11-21-2006, 03:48 PM

http://img294.imageshack.us/img294/7221/dscf0918rt4.th.jpg (http://img294.imageshack.us/my.php?image=dscf0918rt4.jpg)
http://img71.imageshack.us/img71/3085/dscf0919fs8.th.jpg (http://img71.imageshack.us/my.php?image=dscf0919fs8.jpg)
http://img70.imageshack.us/img70/7417/dscf0927iu0.th.jpg (http://img70.imageshack.us/my.php?image=dscf0927iu0.jpg)
http://img174.imageshack.us/img174/6407/dscf0921gc4.th.jpg (http://img174.imageshack.us/my.php?image=dscf0921gc4.jpg)
http://img295.imageshack.us/img295/610/dscf0922lr9.th.jpg (http://img295.imageshack.us/my.php?image=dscf0922lr9.jpg)

ea6gka

11-21-2006, 04:44 PM

hi everyone:)
this is my little case...i think btx is better than atx.

http://img155.imageshack.us/img155/4765/p1030530zo6.jpg

and this is commander HQ :cool:

i think thats still called ATX

btw i have done the same mod to my stacker check it out. a plexy is attached on it too.

http://img149.imageshack.us/img149/1442/untitled1vb8.th.jpg (http://img149.imageshack.us/my.php?image=untitled1vb8.jpg)

Bryants97240sx

11-21-2006, 05:46 PM

i think thats still called ATX

btw i have done the same mod to my stacker check it out. a plexy is attached on it too.

http://img149.imageshack.us/img149/1442/untitled1vb8.th.jpg (http://img149.imageshack.us/my.php?image=untitled1vb8.jpg)

The mobo up side down like that is called BTX, i believe.

SparkyJJO

11-21-2006, 07:08 PM

The mobo up side down like that is called BTX, i believe.
There is more to BTX than that actually. The layout of the mobo is a little different as well. What he has is just an inverted BTX or, if you like, BTX wannabe :p:

Blackpitty

11-22-2006, 07:54 AM

My Tsunami with 2x 120mm Fans in the Front

http://img387.imageshack.us/img387/4935/dsc04789qj4.jpg
http://img385.imageshack.us/img385/629/dsc04754oi8.jpg
http://img237.imageshack.us/img237/1056/dsc04775rx1.jpg
http://img237.imageshack.us/img237/8632/dsc04776pl6.jpg
http://img385.imageshack.us/img385/9763/dsc04778kq6.jpg
http://img385.imageshack.us/img385/2355/dsc04782tl7.jpg
http://img244.imageshack.us/img244/2831/dsc04783ok5.jpg
http://img387.imageshack.us/img387/9383/dsc04788ta7.jpg

el rolio

11-22-2006, 08:00 AM

very nicely done there, love the attention to wiring, making it neat is good!

iSlash

11-22-2006, 09:00 AM

+1 like it too

PS Want a VC like that :( :rolleyes:

GAM

11-22-2006, 11:57 AM

Nice work. I like your anti-vibration HDD mounting system too.

What is the point of the 'blower' fan? What is it cooling?

CH3CH2OH

11-22-2006, 12:09 PM

@Bryants97240sx
actually somethings different in real BTX
my systems arrangement is closer to btx

@Blackpitty
i like yor cases and hdd location replacement
nice job!!!
sorry for my bad english....

Blackpitty

11-22-2006, 12:40 PM

Nice work. I like your anti-vibration HDD mounting system too.

What is the point of the 'blower' fan? What is it cooling?

thanks to all for your comments:banana:

sorry my English is not so good

@GAM

do you mean the small fan behind the HDD-before the board? (of asus?)

GAM

11-22-2006, 12:49 PM

Yeah I think so. I just had another look at a different pic and realised it is open at the back and I guess blowing air over your sound card? When I first looked at it, and thinking that blower fans like that usually blow air out sideways, perpendicular to the fans rotation, I was confused. :)

Blackpitty

11-22-2006, 01:06 PM

That is a radial fan, blows laterally out. air blows exactly against the cooler under the graphic card on the board.

GAM

11-22-2006, 01:30 PM

Got it. I couldn't make out any exhaust port on the sides. :rolleyes:

FragTek

11-22-2006, 01:43 PM

Here's my rig with the reinstalled red CCFL's at last...

http://www.xtremesystems.org/forums/attachment.php?attachmentid=53223&d=1164231728
http://www.xtremesystems.org/forums/attachment.php?attachmentid=53224&d=1164231728
http://www.xtremesystems.org/forums/attachment.php?attachmentid=53225&d=1164231728
http://www.xtremesystems.org/forums/attachment.php?attachmentid=53226&d=1164231790

JoeBar

11-22-2006, 02:18 PM

Nice! :)

Nazu

11-24-2006, 02:11 PM

See page 34 :)
Wow! Very nice man :up: Have you done all by yourself? I mean the mobo mounting and that?

bullit

11-24-2006, 03:13 PM

biohead

11-27-2006, 02:29 PM

Wow! Very nice man :up: Have you done all by yourself? I mean the mobo mounting and that?
Hmm I guess I haven't really showed any clear inside pics. But anyway, yea the lot. Mounting the mobo and PCI bracket was a PITA but it still works. :)

AMD_Deluxe

11-30-2006, 06:49 AM

Last shots of my rig with X1950XTX .... at midday tomorrow my 8800 will be attached ...

http://img241.imageshack.us/img241/2281/dscs0055xp6.th.jpg (http://img241.imageshack.us/my.php?image=dscs0055xp6.jpg)http://img134.imageshack.us/img134/8431/dscs0056xp9.th.jpg (http://img134.imageshack.us/my.php?image=dscs0056xp9.jpg)

FEEXX

12-01-2006, 01:31 AM

AMD_Deluxe

12-01-2006, 10:03 AM

http://img394.imageshack.us/img394/7990/dscs0067lu9.th.jpg (http://img394.imageshack.us/my.php?image=dscs0067lu9.jpg)

Corner

12-01-2006, 10:27 AM

Really smart look, i love it

congrats!:clap:

It looks tight, nice case

Anavel0

12-01-2006, 01:51 PM

@ Bullit: I love that colour with the black Lian-Li. It just looks awesome! A+ I love it!

@AMD_Deluxe: Quit being such a tease. :D

AMD_Deluxe

12-06-2006, 01:03 PM

Nicksterr

12-06-2006, 09:55 PM

http://img99.imageshack.us/img99/4396/1lm0.th.jpg (http://img99.imageshack.us/my.php?image=1lm0.jpg)
http://img177.imageshack.us/img177/725/2ys5.th.jpg (http://img177.imageshack.us/my.php?image=2ys5.jpg)

What's powering your rear-lower 80mm fans? I don't see any connectors on the mainboard or the wires tucked behind mobo tray. Or are they just too hard to see in that picture?

AMD_Deluxe

12-08-2006, 08:50 AM

They are connected , but u cant see them ^^ .. because they arent connected on the mainboard ;)

Stx

12-09-2006, 10:09 PM

http://img237.imageshack.us/img237/1056/dsc04775rx1.jpg

Thats a nice way to use that Asus optional fan, how did you attach it there exactly?

VIctorj

12-12-2006, 05:51 PM

It looks like he used 2 ram sinks to lift it up a bit...and i guess that white stuff is double sided tape.

FEEXX

12-13-2006, 09:50 AM

well nice DIY solution, but you really need to coll r sound card?

OV3RCLOCK3R

12-13-2006, 02:31 PM

Dont thing he's using it for the soundcard, the fans blowing on the southbridge ;)

Sin

12-14-2006, 12:31 AM

Here is my most recent build. Parts were pulled from several systems laying around the house to build what i call my Duo RAID 0 Encoding machine. This unit runs 24/7 downloading, ripping, encoding and burning movies, music and files that are then transferred to my 4 Tyrabyte server.

System Specs

Lian Li V1000 case
PCP&C 510
Asus P4C800E Delux
Intel P4 3 at 3.6
2 Gigs Corsair xms4400
Sapphire X800XTX Platinum
2 Raptor 74's RAID 0
2 Western Digital 250's RAID 0
Plextor PX-760A
Toshiba 1712 Speed Hacked
X-FI Fatal1ty
Danger Den Maze 4 on CPU & GPU
Chrome BIX 120
Ehime 1250 Pump

The entire system was tuned using SilentX 120 fans and runs near silent.

http://i99.photobucket.com/albums/l295/SinCityAssassin/IMG_1657.jpg...............http://i99.photobucket.com/albums/l295/SinCityAssassin/IMG_1663.jpg
http://i99.photobucket.com/albums/l295/SinCityAssassin/IMG_1659.jpg...............http://i99.photobucket.com/albums/l295/SinCityAssassin/IMG_1686.jpg
http://i99.photobucket.com/albums/l295/SinCityAssassin/IMG_1669.jpg...............http://i99.photobucket.com/albums/l295/SinCityAssassin/IMG_1671.jpg

bball4ever39

12-14-2006, 01:14 AM

Wow thats one amazing case you've got there Sin. :slobber:

Teratism

12-14-2006, 01:38 AM

A very fierce Mofo in my opinion.

Sin

12-14-2006, 02:08 AM

Thank you gentleman, more to come soon :)

FEEXX

12-14-2006, 02:38 AM

Ouch thats "alienware" and rest is bull****

Lot of time invested, result = damn Good!

el rolio

12-14-2006, 08:23 AM

holy :banana::banana::banana::banana: balls wOWOW awesome sauce! great job. and i hate bright lights too! but htis one won me over!

FEEXX

12-14-2006, 08:32 AM

A Lot of "dremel" masters arround here XD

Anavel0

12-14-2006, 09:02 AM

Awesome work. I love the cut outs. Glad to see someone else likes SilenX fans also, as no one seems to believe me.

SparkyJJO

12-14-2006, 09:52 AM

Well there are actually 2 silenx fan types out there. What we have in the states is this:
http://www.silenxusa.com/productcart/pc/catalog/sx_fan_12025.jpg

Taken from silenxusa.com. It looks like a basic 120mm fan and people have said they aren't as quiet as they say.

Now look at this:
http://www.silenx.com/ixp-74-front-large.jpg

Taken from silenx.com. Same company, but at silenx.com there is no USA link, and those fans cannot be found here in the USA. They are definitely designed differently though, with more of a forward sweep in the blades, a smaller motor, and it looks like maybe a little more of an aggressive angle to the blades. While there isn't anything certain as to how the two compare it is entirely possible that the ones we are stuck with in the USA are louder than the ones outside of the USA. *CORRECTION* Ananvel0 pointed out they can be had at frozenCPU.com.

Just something that someone in the aircooling section pointed out.

Now I don't want this to turn into a discussion on how crappy silenx may or may not be, I just thought I'd throw this out there for some to think about. I am in no way advocating using silenx fans, I think they are too pricey ;)

Anavel0

12-14-2006, 12:03 PM

Ask and you shall receive. Here is the link to where I get my SilenX fan at, and they are in America. http://www.frozencpu.com/cat/l3/g36/c15/s550/list/p1/Fans-Case_Fans-SilenX-Page1.html

SparkyJJO

12-14-2006, 02:03 PM

I stand corrected :)

Baron

12-22-2006, 01:45 PM

Here is my rig. Now an Akasa Eclipse and a 8800GTS inside.

http://i144.photobucket.com/albums/r198/Frollkiller/11.jpg

Not my foot by the way. ;)

OV3RCLOCK3R

12-22-2006, 04:10 PM

Very very nice Sin! :-o

GAR

12-22-2006, 07:29 PM

Here is my system guys........

http://i145.photobucket.com/albums/r210/gar818/CIMG27655.jpg
http://i145.photobucket.com/albums/r210/gar818/CIMG27599.jpg
http://i145.photobucket.com/albums/r210/gar818/CIMG27588.jpg
http://i145.photobucket.com/albums/r210/gar818/CIMG27566.jpg
http://i145.photobucket.com/albums/r210/gar818/CIMG27533.jpg
http://i145.photobucket.com/albums/r210/gar818/CIMG27488.jpg

Stx

12-22-2006, 07:44 PM

^ Nice rig!, how come you have the Tuniq seated the other way around?

BlaqMale

12-22-2006, 10:07 PM

cause the antec nine has the big fan on top.....???

dnb#

12-23-2006, 12:06 AM

fragtek, what are your cpu temps?

GAR

12-23-2006, 12:36 PM

yeah the 200mm fan on top moves 134cfm of air so the temps are better this way.

apexracing

12-23-2006, 11:13 PM

Just got some new stuff in..

http://img222.imageshack.us/img222/679/mg3157vf0.jpg (http://imageshack.us)

http://img213.imageshack.us/img213/8564/mg3143zq3.jpg (http://imageshack.us)

http://img222.imageshack.us/img222/6099/mg3130du8.jpg (http://imageshack.us)

http://img222.imageshack.us/img222/3586/mg3141fe0.jpg (http://imageshack.us)

http://img270.imageshack.us/img270/6282/mg3173pk2.jpg

X1950XTX is a barrel of laughs, plays games so well. Bit noisy though, oh well. :p:

Hilfiger

12-25-2006, 08:41 PM

yes , the x1950xtx is noisy if you use the ati tool contorl fan feature,

but i agree , is a damn good card, the collors are stunning at high res

nice rig,

Hilfiger

12-25-2006, 08:50 PM

Heres mine ,altough i want to install a ACRyan Radgrill on the top to extract de hot air from de Infinity.

http://img465.imageshack.us/img465/6769/dscn8419mediumqs1.jpg

http://img354.imageshack.us/img354/6735/dscn8427mediumpn9.jpg

i have same case, i try copy your look, uv cathodes comming , and then i hope to make some cable management, but i have way more cables than you :p: , many usb ports, fireware..and stuff, which i actualy use

Xyus89

12-26-2006, 03:21 PM

WoW just saw the new coolermaster, case, ownage itself!

xyus

Hilfiger

12-26-2006, 03:44 PM

WoW just saw the new coolermaster, case, ownage itself!

xyus

pictures?

Xyus89

12-27-2006, 04:43 PM

offcourse hilfiger!

http://www.coolermaster-europe.com/index.php?LT=nederlands&Language_s=11&url_place=product&p_serial=RC-832&other_title=+RC-832+CM%20Stacker%20832

ownage itself IMO.

xyus

Hilfiger

12-28-2006, 10:03 PM

My lian li, my camera is crap, cant take uv lights in shot, so that is all

http://files.myopera.com/hilfiger/albums/180171/poza7.JPG

http://files.myopera.com/hilfiger/albums/180171/poza4.JPG

http://files.myopera.com/hilfiger/albums/180171/poza6.JPG

iSlash

12-29-2006, 02:02 AM

Sweet, but why don't you make a window?

Kaap

12-29-2006, 07:49 AM

Well, with the holidays over and that got me my last stuf for this rig, here are my pics.

Thermaltake Armor, 3 * 120mm fans, 2 * 92mm fans. 4 UV CCFL's, UV reactive cables. And best thing is, some parts of my DS4 seem to light up with UV light.

http://webdisk.planet.nl/vand6194/publiek/album/pimp_kaaps_pc1.JPG
http://webdisk.planet.nl/vand6194/publiek/album/pimp_kaaps_pc2.JPG
http://webdisk.planet.nl/vand6194/publiek/album/pimp_kaaps_pc3.JPG
http://webdisk.planet.nl/vand6194/publiek/album/pimp_kaaps_pc4.JPG
http://webdisk.planet.nl/vand6194/publiek/album/pimp_kaaps_pc5.JPG
http://webdisk.planet.nl/vand6194/publiek/album/pimp_kaaps_pc6.JPG
http://webdisk.planet.nl/vand6194/publiek/album/pimp_kaaps_pc7.JPG

Yeah, those 2 musketeers are nothing but eyecandy, but I'm a sucker for analog gauges. Took me 3 months to get that Musketeer 1 in black. Proud of my rig.

Except the stock cooler, the Scythe Ninja doesn't like my CPU (unequal IHS problem) but a Arctic Freezer Pro is on the way and should tackle that problem.

Hilfiger

12-29-2006, 09:36 AM

Sweet, but why don't you make a window?

if i would have water cooling and not so many cables i would buy a side panel with window

but i have tons of usb cables, fireware, etc.. which i actually use and they are very hard to hide :(

so until water cooling i like keep everything hidden , and the uv lights to be seen only a bit..

my camera is crap.. so you cant see how really looks :)

AMD_Deluxe

12-29-2006, 01:15 PM

:banana: :banana:

http://img146.imageshack.us/img146/3134/dscs0088ee2.th.jpg (http://img146.imageshack.us/my.php?image=dscs0088ee2.jpg)http://img146.imageshack.us/img146/8540/dscs0090ub1.th.jpg (http://img146.imageshack.us/my.php?image=dscs0090ub1.jpg)http://img146.imageshack.us/img146/4733/dscs0091hd3.th.jpg (http://img146.imageshack.us/my.php?image=dscs0091hd3.jpg)
http://img145.imageshack.us/img145/673/dscs0092ui9.th.jpg (http://img145.imageshack.us/my.php?image=dscs0092ui9.jpg)http://img145.imageshack.us/img145/2315/dscs0093eu5.th.jpg (http://img145.imageshack.us/my.php?image=dscs0093eu5.jpg)http://img145.imageshack.us/img145/8135/dscs0094bg5.th.jpg (http://img145.imageshack.us/my.php?image=dscs0094bg5.jpg)
http://img119.imageshack.us/img119/7315/dscs0098qo3.th.jpg (http://img119.imageshack.us/my.php?image=dscs0098qo3.jpg)

HeavyH20

12-30-2006, 09:59 PM

offcourse hilfiger!

http://www.coolermaster-europe.com/index.php?LT=nederlands&Language_s=11&url_place=product&p_serial=RC-832&other_title=+RC-832+CM%20Stacker%20832

ownage itself IMO.

xyus

Already here... :)

http://www.techpowerup.com/gallery/479/1.jpg

NickS

12-30-2006, 10:09 PM

More pix more pix more pix!

HeavyH20

12-31-2006, 12:06 AM

Well, if you mean me, here we go:

And, I know some of you will chuckle about the Coolit, but it works quite well. I replaced a DangerDen loop I was using and it is actually working just as well. Of course, I modified it with a 120 mm fan and removed the stock 92 mm. I also bypassed all the automated items and tuned the pump settings, etc myself. So in quiet mode, at 3.2 GHz, which is where I game with it, it idles around 32C. Crank up the fan, and the temps drop a bit to around 28C.

http://www.techpowerup.com/gallery/479/7.jpg

http://www.techpowerup.com/gallery/479/10.jpg

http://www.techpowerup.com/gallery/479/2.jpg

http://www.techpowerup.com/gallery/479/3.jpg

http://www.techpowerup.com/gallery/479/4.jpg

http://www.techpowerup.com/gallery/479/8.jpg

And, looking inside toward the ugly side where the mess is normally hidden.

http://www.techpowerup.com/gallery/479/__14.jpg

Nicksterr

12-31-2006, 12:09 AM

Nice as always heavy, sticking with Coolermaster cases I see. :cool:

Does the CrystalFonz use the LCDC software?

payne280

12-31-2006, 12:16 AM

HeavyH20 what WC unit is that in your rig?

Nicksterr

12-31-2006, 12:19 AM

HeavyH20 what WC unit is that in your rig?

It's the CoolIt Freezone. It's water + TEC's.

payne280

12-31-2006, 10:35 AM

oh thx Nicksterr

Bryants97240sx

12-31-2006, 12:16 PM

my custom built case. still not all put together yet

http://i26.photobucket.com/albums/c107/Bryants97240sx/P1010079-2.jpg

http://i26.photobucket.com/albums/c107/Bryants97240sx/P1010080-1.jpg

http://i26.photobucket.com/albums/c107/Bryants97240sx/P1010083-1.jpg

http://i26.photobucket.com/albums/c107/Bryants97240sx/P1010084-1.jpg

http://i26.photobucket.com/albums/c107/Bryants97240sx/P1010228.jpg

payne280

12-31-2006, 01:20 PM

Are those Logitech x-530 speakers?, i have the same ones

Bryants97240sx

12-31-2006, 01:30 PM

yeah they are, there alright for the price.

uclajd

01-03-2007, 04:15 AM

HeavyH20

01-05-2007, 06:13 PM

Load and ambient temps? :confused:

Nice looking rig, BTW.

Thanks. load is around 58C with ambient at 21C.

ReelFiles

01-05-2007, 08:00 PM

http://i67.photobucket.com/albums/h287/reelfiles/Computers/388b71ee.jpg

http://i67.photobucket.com/albums/h287/reelfiles/Computers/3cb7cee4.jpg

http://i67.photobucket.com/albums/h287/reelfiles/Computers/DSCF2891.jpg

http://i67.photobucket.com/albums/h287/reelfiles/Computers/DSCF2923.jpg

ReelFiles

01-05-2007, 08:04 PM

http://i67.photobucket.com/albums/h287/reelfiles/Computers/Josfirstrig.jpg

http://i67.photobucket.com/albums/h287/reelfiles/Computers/DSCF2696.jpg

http://i67.photobucket.com/albums/h287/reelfiles/Computers/DSCF2292.jpg

http://i67.photobucket.com/albums/h287/reelfiles/Computers/DSCF2278.jpg

ReelFiles

01-05-2007, 08:06 PM

http://i67.photobucket.com/albums/h287/reelfiles/Computers/DSCF2495.jpg

http://i67.photobucket.com/albums/h287/reelfiles/Computers/DSCF2487.jpg

http://i67.photobucket.com/albums/h287/reelfiles/Computers/DSCF2483.jpg

http://i67.photobucket.com/albums/h287/reelfiles/Computers/DSCF2490.jpg

[CyC]

01-06-2007, 03:29 AM

current desktop (P180b)

http://img222.imageshack.us/img222/3916/img0446ec0.th.jpg (http://img222.imageshack.us/my.php?image=img0446ec0.jpg)

backup desktop (Lian Li PC-65b)

http://img174.imageshack.us/img174/888/img0396ay4.th.jpg (http://img174.imageshack.us/my.php?image=img0396ay4.jpg)

exteriors are unmodded and only have black dvd bezel so nothing special :)

Teratism

01-06-2007, 03:36 AM

That is a seriously clean p180, how did you get it to look like that?

[CyC]

01-06-2007, 03:39 AM

That is a seriously clean p180, how did you get it to look like that?

dremel a few places to route cables since p180 is so restricting on cable management

alejo

01-06-2007, 03:40 AM

To very very neat cabling jobs. No matter how much I try or how many zip ties and tucking cables here and there I can never get it to look quite as good. :)

Teratism

01-06-2007, 03:45 AM

My P180 looks like crap inside. If you can get any shots of the dremel holes from the back and any tape jobs that would be great. I have a p180 with the corsair 620. Being very close to yours would be nice to know how to make it nicer.

squilliam

01-06-2007, 05:22 AM

Already here... :)

http://www.techpowerup.com/gallery/479/1.jpg

That has to be the sexiest case I have ever seen. Bravo.
I bet it is one dang expensive case. How much?

Xion X2

01-06-2007, 09:57 AM

Here she is. I'll be adding a second 8800GTX on water to her real soon. :)

http://www.nvnews.net/vbulletin/attachment.php?attachmentid=23197&stc=1&d=1167751943
http://www.nvnews.net/vbulletin/attachment.php?attachmentid=23136&stc=1&d=1167542317
http://www.nvnews.net/vbulletin/attachment.php?attachmentid=23137&stc=1&d=1167542317
http://www.nvnews.net/vbulletin/attachment.php?attachmentid=23181&stc=1&d=1167637174
http://www.nvnews.net/vbulletin/attachment.php?attachmentid=23143&stc=1&d=1167542911
http://www.nvnews.net/vbulletin/attachment.php?attachmentid=23140&d=1167542616
http://www.nvnews.net/vbulletin/attachment.php?attachmentid=23145&stc=1&d=1167542911

Teratism

01-06-2007, 10:51 AM

Nice blue, very nice except for that one purplish/pink light that throws off the rest.

Side note: Where did you pick up the OCZ XTC Ram Cooler?

NickS

01-06-2007, 10:54 AM

Lagoom.com has them.

Xion X2

01-06-2007, 12:42 PM

Nice blue, very nice except for that one purplish/pink light that throws off the rest.

Side note: Where did you pick up the OCZ XTC Ram Cooler?

Yeah, I've been meaning to place some black electrical tape over that purple light. It's actually on the motherboard under the "ASUS" logo.

But then I'm swapping out this mobo anyway for a P5N-E SLI real soon.

And I got the ram cooler at www.atacom.com

thespeakerbox

01-06-2007, 05:06 PM

Love the look XION. Did you add those rolling feet to the case?

T1Cybernetic

01-06-2007, 10:14 PM

Xion X2 how did you get the rad mounted in the top of your case like that? it looks very neat, did you mod it yourself?

Xion X2

01-07-2007, 01:29 AM

@thespeakerbox

Thanks. Yeah, they're Lian Li aluminum casters.

@T1

Thanks. I bought the case from www.performance-pcs.com and had them custom mount the rad in the top like that before they shipped it to me. Everything else I did myself.

Here's another shot of it from a different angle (just ignore the little bit of dust up there, I've since taken care of it):

Timmy152005

01-08-2007, 08:34 AM

Heres mine:
Asus P5DH Deluxe motherboard
Inter core duo 2 E6700
ATI 1950XTX
2GB G.Skill Ram
120GB SATA Hard Drive

http://img201.imageshack.us/my.php?i...1070023fd2.jpg
http://img519.imageshack.us/my.php?image=1003371bq8.jpg
http://img519.imageshack.us/my.php?image=1003375tb6.jpg
http://img519.imageshack.us/my.php?image=1003377zv8.jpg
http://img519.imageshack.us/my.php?image=1003387ae9.jpg

Roger_D25

01-08-2007, 04:18 PM

Hey Guys,
I've never posted any pictures here but I liked looking at all the other rigs so much that I thought I should post mine to. I just recenlty made the switch over to C2D from s939 like many others have and I'm enjoying it very much! I just finished the build about 2 days ago, now I'm finally able to just enjoy it!

http://img238.imageshack.us/img238/9776/img1ho4.jpg

http://img353.imageshack.us/img353/342/img2up3.jpg

http://img213.imageshack.us/img213/4759/img3za4.jpg

http://img386.imageshack.us/img386/5943/img4sg8.jpg

http://img291.imageshack.us/img291/1452/img5ds5.jpg

http://img291.imageshack.us/img291/8031/img6vu5.jpg

http://img386.imageshack.us/img386/3310/img7le9.jpg

http://img206.imageshack.us/img206/1319/img8zp3.jpg

http://img154.imageshack.us/img154/7554/img9mp2.jpg

http://img215.imageshack.us/img215/8725/img10vo6.jpg

http://img154.imageshack.us/img154/2118/img11wi7.jpg

jettasin00

01-09-2007, 01:56 PM

asus p5b-3
c2d 6400@ 3200mhz w/ zalman 9500 led hsf
evga 7900gs w/ valman vf700 gpu cooler
320gb seagate 7500.10 sataII
120gb WD cavier IDE
Philips DVD R/RW
2gb Wintec amp-x pc 5400
600w psu

Atrix case
http://img.photobucket.com/albums/v108/jettasin00/tower.jpg

the wires at the bottom are for the fans
http://img.photobucket.com/albums/v108/jettasin00/tower1.jpg

http://img.photobucket.com/albums/v108/jettasin00/tower2.jpg

the side when running. open air case thats just one big filter. the multi color is from the 120mm fan that has 4 different leds. need to change that up to just blue
http://img.photobucket.com/albums/v108/jettasin00/tower3.jpg