Hercules 3D prophet 9600pro

[ns_ripper]

Does anyone know how to Vmod the gpu?

I'm a bit maxed out at 513Mhz sometimes it lockes up running 3dmark at 519 and sometimes it doesn't so I guess I need a Vmod. My memory is pretty good I think. I can run at 371.25Mhz mem without artifacts.

so I need a Vgpu mod urgent ;) If you guy's want I can post some pictures of the board this weekend.

[ns_ripper]

Pics are up:

http://users.skynet.be/lodewj/DSCF0175.jpg

http://users.skynet.be/lodewj/DSCF0185.jpg

can someone help me out on this one?

[ns_ripper]

I already tried this one from an other forum since it resembles a lot to my card but the mod failed. when I connected the Vmod with the resistor turned to 10K, My pc wouldn't post :(

http://www.ocbench.ro/radeon/vcoremod.gif

is there no one who can help me on vmodding my gpu?

[Jethro]

i think ur going to the wrong pins on that ICS dood.

I think gymforte over at this thread has the same card modded with pics, perhaps u can check it out for reference.


9600pro vmod overclocking link (http://http://www.rage3d.com/board/showthread.php?threadid=33690026&perpage=20&pagenumber=23)

[ns_ripper]

Originally posted by Jethro
i think ur going to the wrong pins on that ICS dood.

I think gymforte over at this thread has the same card modded with pics, perhaps u can check it out for reference.


9600pro vmod overclocking link (http://http://www.rage3d.com/board/showthread.php?threadid=33690026&perpage=20&pagenumber=23)

The picture I posted with the resistor is the one from gymforte.
But it results in a none posting pc here. total weirdness I guess.

that's why I'm asking for some help on this case.

[ns_ripper]

no one who can help me? :(

[-Markus-]

Sorry I can not help you, but Im looking for some clues about tihs.


Can you check up your voltage.


My card can only clock to 460 so I think my card has very low voltage. But I need a reference from a card that overclocks more. If this card is at low voltage Im going to make a volt mod. If it is not Im going to make so and hope it to crack so I get a new one.

[-Markus-]

Or if you want to mail me the bios from your cad an dI can try it on my.
Then if I can go any higher we know that we have to get a bios from one of the card that overclock to 540.

Becuse then hte card overclock depends on the bios

[Yagami]

http://yagami.altervista.org/Pandyno/9600.jpeg

This?

[Redheads]

See also if you have a card with all the caps on it and solder an fdd connector on it.

Seems that when some do the vgpu mod the mem oc will go down quit a bit.

One who has done the mod with that problem hooked up a fdd connector and running 600 core and 371 on mem

[ns_ripper]

Originally posted by Yagami

image

This? [/B]

as you can see our hercules card uses a much smaler chip voor the vgpu so that picture can't help us :(

[-Markus-]

Hi again


I have tried to get it from Hercules but they do not answer on that question, they do not want to help people overclock.

Also tried to get a bios from a review card but they have all been returned back to Hercules.

So I would be very greatful if you send me a copy of your bios. If you want to I can send you the program to download the bios.

[ns_ripper]

Originally posted by -Markus-
Hi again


I have tried to get it from Hercules but they do not answer on that question, they do not want to help people overclock.

Also tried to get a bios from a review card but they have all been returned back to Hercules.

So I would be very greatful if you send me a copy of your bios. If you want to I can send you the program to download the bios.


ok, you can send me the program if you want. send me a pm with your email adress. I will send reply to you with my bios attached.

[-Markus-]

Thank you

I will send you the program.

Originally posted by ns_ripper
ok, you can send me the program if you want. send me a pm with your email adress. I will send reply to you with my bios attached.