[NBCL]:E8500+790i+GTX SLI:114k '01, 92,6k '03 & 35.8k '05

[nachthymnen]

First run with my new SLI setup.
Never play before SLI, I must say it's fun:)
Also this is my first time @ LN2 without my QX:(
Really high humidity today and never find the best settings for run the E8500 over 5.5Ghz 3d stable:(:shakes:
Cold bug @ -110 idle over 570FSB.:(
Is fun to bench with a dualcore after many times with my quad, the DRAGON can handle it with a drop of LN2:D:up:

SETUP:
20L LN2
Dimastech Bench Table
E8500 Dragon F1EE cooled :clap:
Zotac 790i-Supreme stock cooling (P1/P2 Auto)
2x1GB CellShock 14400
2xZotac 9800GTX liquidcooled by K7(no mods)
Sirtec High Power 1200W
Win XP+SP2 non tweaked

http://www.pctunerup.com/up/results/_200805/20080524140036_Immagine007.jpg

http://www.pctunerup.com/up/results/_200805/20080524140101_Immagine008.jpg

http://www.pctunerup.com/up/results/_200805/20080524140838_Immagine015.jpg

http://www.pctunerup.com/up/results/_200805/20080524140112_Immagine014.jpg

http://www.pctunerup.com/up/results/_200805/20080524140846_Immagine011.jpg

Here we go:)
Aqua just for fun:
http://www.pctunerup.com/up/results/_200805/20080524140956_298874.jpg

http://www.pctunerup.com/up/results/_200805/20080524141037_35872.jpg
http://service.futuremark.com/compare?3dm05=4284144

http://www.pctunerup.com/up/results/_200805/20080524141045_92662.jpg

And my best:)
http://www.pctunerup.com/up/results/_200805/20080524141055_114094.jpg
http://service.futuremark.com/compare?2k1=9380307

I know, is not a perfect score but I run only 1 time CL and my OS is "normal", also used 175 driver:)
Not bad I think...better than 174.xx for sure.

Asap I'll upload the scores in the FM ORB.

Uh, I forgot to say...LB @ 4.9 for each benchmark:)

[xwards]

nice setup and results :clap:
keep pushing :up:

[SIOUX]

very nice nactý:toast: Was mip map used for the 01 run? :)

[nachthymnen]

very nice nactý:toast: Was mip map used for the 01 run? :)

Tks my friend:)
No, as I had write in the first post only LB @ 4.9:up:
With MIP I think is possible to obtain 116k:)
Confronting with Pedro's and Gautam's run I think to be ok, my vga is more gpu/mem clocked.
With MIP Tweak Nature could be over 1700fps.

Can't wait to freeze the GTXs:D

@Xwards: Tks M8:)

[Oliver]

Looks good, looking forward to ur tek4 runs...

[nachthymnen]

Looks good, looking forward to ur tek4 runs...

Tks Oliver:)

[bonzo_catalin]

Did you try use nHancer ?

[Ming@s]

Very good these 100k.

[nachthymnen]

Did you try use nHancer ?

Not this time, I must update .NET Framework befor to install it:)
Next week maybe:D

@Ming@s: Tks:)

[Pedro Rocha]

Bravo my friend - very nice numbers in my favourite game :up::up::up:

To bad your E8500 can't bench at 5.5Ghz + due to cold bug - maybe with a good cascade in can get better results ..

Your Nature are ok a bit better than mine due to more gpu/shaders clock (so no mipmap cheat), but there is margin for improvement in Lobbies and Car :yepp:

[nachthymnen]

Bravo my friend - very nice numbers in my favourite game :up::up::up:

To bad your E8500 can't bench at 5.5Ghz + due to cold bug - maybe with a good cascade in can get better results ..

Your Nature are ok a bit better than mine due to more gpu/shaders clock (so no mipmap cheat), but there is margin for improvement in Lobbies and Car :yepp:

Hey, tks Pedro:toast:
Maybe the chip can go higher but today I was not able to find the right way:(
Try also with higher v-core but it doesn't help.:shakes:
Yeah, no MIP used:up:
Yes, I must work in Lobbies, Cars and Dragons too:)

[nachthymnen]

Added links to FM ORB except '03...:shrug:
Can't upload:confused:

[Solarfall]

very nice runs nachthymnen :bounces: lol i had no idea that zotac made boards too :rofl:

[nachthymnen]

very nice runs nachthymnen :bounces: lol i had no idea that zotac made boards too :rofl:

Tks my friend:)
Yes, Zotac made mainboard too, and is really good.
Boot @ 580x9.5 without problems but when in Windows I was unstable for unknown reason.
More time to learn this setup is needed for me.
Tomorrow second run with my QX, seems to run well again today:D
I dream about 5.7Ghz 3d'01 with 2 cores, already done on Blitz Extreme:up:

[lukas69]

Great score my friend

[nachthymnen]

Great score my friend

Tks Luca:)
Tomorrow I'll try to update all with my QX:rolleyes:

Uh, that's my first time in the top 10 FM:D
http://www.pctunerup.com/up/results/_200805/20080524214422_orbHOF.jpg

I know, we must add PRO and Shamino.

[George_o/c]

Congratulations nachthy :up:, really nice scores :) Just a question : Tomorrow you 'll try your system with Jason's cpu ? Or your QX decided to work again ? :p: Can't play 5700 3D 01 all cores enabled ? ...

[nachthymnen]

Congratulations nachthy :up:, really nice scores :) Just a question : Tomorrow you 'll try your system with Jason's cpu ? Or your QX decided to work again ? :p: Can't play 5700 3D 01 all cores enabled ? ...

Tks my friend:up:
Tomorrow again with my QX, today seems to work fine again under Tuniq:)
Jason's QX will arrive next week:D
With 790i I think is really hard to handle a 5.7Ghz Yorkfield with 4 core enabled.
Supplying sections is not good as P5E3WS for 4 cores enabled.
Well, for '01, '05 and '03 2 core is sufficent:D
Maybe I'll try a '06 @ 5.4ghz if it will be possible and i the LN2 left is sufficent for all the 3d section.
I will start with Aquamark:)

[makaka]

What about 2v , this should ADD another 100-150 Mhz , maybe 100 k . Any way congrats in your results.

[nachthymnen]

What about 2v , this should ADD another 100-150 Mhz , maybe 100 k . Any way congrats in your results.

heh, I didn't want to risk the cpu @ his first LN2 run:D
I've set max 1.9V real but doesn't help:(
I can load Win @ 5.51Ghz without problems and bench SPI or Wprime but not 3d stable.:shakes:

[DMH]

What about 2v , this should ADD another 100-150 Mhz , maybe 100 k . Any way congrats in your results.

He said that he couldn't find the settings for 5.5+ 3D benchable so I guess he tried more volts

[nachthymnen]

Just a super fast '06 run with low QX:
http://www.pctunerup.com/up/results/_200805/20080525102023_27714.jpg
http://service.futuremark.com/compare?3dm06=6858250

[George_o/c]

Patiently awaiting for your results ;) :up:

[nachthymnen]

Patiently awaiting for your results ;) :up:

Tks, now I must wait 2 weeks for the next session:(

[George_o/c]

That's the bummer thing with LN2 ... Unless you have 2 or 3 x 130 - 180L dewars screaming to be filled with LN2, the LN2 supplier won't come on short notice - when you need him to ... :( That's why when I go sub-zero, I'll go for a cascade and dry ice on the VGAs ...

[G H Z]

Uh, that's my first time in the top 10 FM :D

Good work Giorgio! :toast:

[wasky]

very nice runs Giorgio :up:

mine compliments my friend


Regard


Roberto

[nachthymnen]

Good work Giorgio! :toast:

Tks my friend:)
I think I will must contact very soon Vince again for my second Tek:p::D
I want some serious 3d mark with SLI @ LN2:rolleyes::)

@Wasky:
Hey Roberto, many tks:up:

[nachthymnen]

Ordered my second TEK9:D
In 2 weeks some updates I hope:rolleyes::)

[fubarswe]

You really goin for it :-) I wish You best of luck and may the OC-gods and dragons be with You!

[nachthymnen]

You really goin for it :-) I wish You best of luck and may the OC-gods and dragons be with You!

hehe, tks fubarswe:)
I'll do my best:up:

[nachthymnen]

Tks to Jason MM:D:up:
Next week I hope to put it on a BlackOps:)
http://www.pctunerup.com/up/results/_200805/20080529231214_Immagine007.jpg

[bonzo_catalin]

It's your fingerprint on it ? Did you touch it ?

[eva2000]

Congrats mate... good luck on new QX9650 :D

[nachthymnen]

It's your fingerprint on it ? Did you touch it ?

haha, yes it is:D
I have touched:eek::hrhr:
Can't wait to freeze it:)

@ Eva: Tks my friend:)
Next saturday my first run with 3 pots and more...:)
I've plannned(with a little bit of lucky) to runs some SLI run with E8500 and some runs in single with the QX+GX2 on Blackops:rolleyes:

'03 testing with GX2:
http://www.pctunerup.com/up/results/_200805/20080530101108_81287.jpg

[George_o/c]

I am so touched with emotion :D This QX can bench 3D 06 @ 5.7GHz ... That's just so incredible, you can't easily find one that can do that :eek: ;) Giorgio, pay A LOT attention on that cpu, don't use it with your Vdroop bugged (:D) Asus board ... :p:

[nachthymnen]

I am so touched with emotion :D This QX can bench 3D 06 @ 5.7GHz ... That's just so incredible, you can't easily find one that can do that :eek: ;) Giorgio, pay A LOT attention on that cpu, don't use it with your Vdroop bugged (:D) Asus board ... :p:

Hey my friend:)
Hehe, I can't wait to try it on the Foxconn next week:D:up:

[nachthymnen]

Second Tek9 has arrived to destination:)
Tks Vince:up:
http://www.pctunerup.com/up/results/_200806/20080611111734_Immagine016.jpg

[nidecker]

2x Tek 9 :eek:

Have a good fun! :yepp:

[nachthymnen]

RIG ready, now I need LN2:)
http://www.pctunerup.com/up/results/_200806/20080612010659_Immagine018.jpg

[George_o/c]

Can't wait for your session man :) Any chance u get another 35L dewar and don't have to wait that much for LN2 ? :p: :D
And also 2 more questions :

a) How much time does it take for 35L of LN2 to finish ? ... Let's say both VGAs and cpu under LN2, or only 1 VGA and the cpu under LN2 etc ;)

b) How much does LN2 cost in Italy ?

[nachthymnen]

Can't wait for your session man :) Any chance u get another 35L dewar and don't have to wait that much for LN2 ? :p: :D
And also 2 more questions :

a) How much time does it take for 35L of LN2 to finish ? ... Let's say both VGAs and cpu under LN2, or only 1 VGA and the cpu under LN2 etc ;)

b) How much does LN2 cost in Italy ?

Yes, but onyl for this time:)
I will drive 240km(near Venice) for recharge my dewar tomorrow:D

mmm, it depends on CB of the components.
In my last session I've used around 20L in 6:00 hours only with the QX:eek:
Benching @ -150 needs alot of LN2:)
With 3 pots I don't know:shrug:
9800GTX have a bad CB so not to mouch LN2.

Some people find LN2 @ 1Euro for Liter, me I must pay 2Euro X Liter:shakes:

[nachthymnen]

haha, sorry but this was the first time that I had assist during the dewar's recharge:D

http://www.pctunerup.com/up/results/_200806/20080613114636_13062008055.jpg

http://www.pctunerup.com/up/results/_200806/20080613114704_13062008059.jpg

http://www.pctunerup.com/up/results/_200806/20080613114725_13062008063.jpg

http://www.pctunerup.com/up/results/_200806/20080613223200_13062008060.jpg

Really nice to see:eek::D

It will be nice to have a 5000L cistern of LN2.

[T_M]

nice dewar collection!
I love when that vapour fills the front entrance to my condo building, other residents go ape :banana::banana::banana::banana: :D

[fubarswe]

I love the pics nachthymnen! :-)))))
(have anybody asked yourself a question.., what the hell we are doin..? :-))))

May the dragons be with you coming bench!

[DeDaL]

Damn nice setup here !!!

You make vdroop mod on MB ?

[lukas69]

wow impressive recharge LN2

[nachthymnen]

nice dewar collection!
I love when that vapour fills the front entrance to my condo building, other residents go ape :banana::banana::banana::banana: :D

hehe, I've only 1:(:rolleyes:

[nachthymnen]

I love the pics nachthymnen! :-)))))
(have anybody asked yourself a question.., what the hell we are doin..? :-))))

May the dragons be with you coming bench!

:D
Tks my friend, tomorrow @ 6:30AM I will start:up:

@ Dedal: No v-mods for now on the board:(
GTX v-core mod set @ 1,4V Idle:)

[nachthymnen]

Really bad first full LN2 test:(
I've used my old QX(still running really nice) but I had a lot of problems with 1 of the 2 gpu:(
I don't know why.
Cold bug gpu @ -46:(
After 15L of LN2 wasted I've decided to stop the session and in the afternoon I will try some SPI actions with the BlaOps and the new QX.

This is the only screen saved, really bad:(
After 2 hours losted to found the problems, vga has started to going crazy(-140c on the riva tuner panel)
http://www.pctunerup.com/up/results/_200806/20080614103533_27987.jpg


The QX is nice, boot @ 5.6Ghz without problems and close '06 cpu test with 2.00V from bios but every time during canyon flight('06) vga freez:mad:

So for this time that's all.:(

Only 2 pics taked during the pot's cooling down:
http://www.pctunerup.com/up/results/_200806/20080614104525_Immagine019.jpg

http://www.pctunerup.com/up/results/_200806/20080614104612_Immagine020.jpg

See you in the afternoon with good SPI results I hope:rolleyes:

[EmaXOC]

giorgio i'm very unhappy about your problems, but i feel to congratz to you wherefore manage 3 pot is not easy, on the contrary is very very difficult!
Don't worry abut this not so god morning, today you will do great things on blakOps, I'm sure!

Waiting Pi now!

:up::up:

[fubarswe]

my hat goes of for your percistans.., I know you will get there eventually and do some serious Hwbot damage..:-)! You are doing the one and only right thing.., pushing and trying.., doin 3 pots alone is nervwrecking:eek:
best of luck my friend! :-)

[gandalfone]

Very very nice setup:clap:

manage 3 pot is not easy But you are constant...Good work and good luck

[nachthymnen]

Tks guys, really sad this morning:(
I was dreaming about 96+k '03, 115+k '01 etc. but too many problems with one vga:(

The afternoon has going a little bit better:D
http://www.pctunerup.com/up/results/_200806/20080614182254_16.38.jpg

http://www.pctunerup.com/up/results/_200806/20080614182334_7.859.jpg


http://www.xtremesystems.org/forums/showthread.php?p=3061552#post3061552

[wasky]

i'm afraid for u problem bros :( 3 pot without help is hard :clap:

good afternoon i see George :up:

BO is a good MB

next bench ? tomorrow ?


rob

[nachthymnen]

i'm afraid for u problem bros :( 3 pot without help is hard :clap:

good afternoon i see George :up:

BO is a good MB

next bench ? tomorrow ?


rob

Tks Rob;)
Yes, 3 pots is really difficult to handle especially for one like me that have a little experience with LN2, but it was fun:)

LN2 is finished now:(
Next session in 3-4 weeks:(

[George_o/c]

Nice SPi and PiFast runs Giorgio :up: