DFI P35-T2R blood vs dk vs lt vs ut

[scottc19]

Which one for the cheapest OCing of a q6600 3.8-9ish
They seem all about the same except for more pcie slots and dual lan and maybe added usb ports, and better looks. But I would assume all have the same bios and the same chips.
Is there any other critical information that I should know, before I just go with a blood one to save $$$.
Thanks

[zsamz_]

if you wanna save get the dk

[zanzabar]

the LT/UT are the same the others are different if u want to save go for the DK but the LT/UT have an 8phase digital pwm setup and its awesome, and for 3.8/9 i think that the LT would be best, or waiting for a p45

[inonefly]

whats the highest FSB on quad you can get on the LT P35? I have seen the DK can do 500 but the LT was about 475? so why pay more for the LT/UT? sorry to jump in with the question, im also interested in the the DFI mobos for my Q6600.

[zsamz_]

personnally i wouldnt touch a dk with a quad
the lt ut p35 is the best ddr2 board better than my x38

[scottc19]

Thanks I just bought an lt ut p35 off ebay, so I shall see how it preforms :)

[zanzabar]

whats the highest FSB on quad you can get on the LT P35? I have seen the DK can do 500 but the LT was about 475? so why pay more for the LT/UT? sorry to jump in with the question, im also interested in the the DFI mobos for my Q6600.

im not sure were u saw that but the LT/UT take more fiddling out of the box on a dual the dk will clock higher, but with tweaking and gtls the LT/UT will be better especially with a quad

[inonefly]

im not sure were u saw that but the LT/UT take more fiddling out of the box on a dual the dk will clock higher, but with tweaking and gtls the LT/UT will be better especially with a quad

well... i saw the dk p35 review showed the 500fsb with a quad and I have been reading the ut/lt p35 thread and I havnt finished reading but i dont remember people were getting better results than the dk p35?

dont get me wrong, myself is looking a new moboand im thinking the ut p35 and lt x38 as they are the same price in my region, but i dont know y ppl all saying the lt p35 is so much better when none of them r getting better results?

[Loser777]

When you're talking about the DK, your referring to the DK T2RS right? That's a pretty cheap board then... looks pretty skimpy on the heatsinks though.

[zsamz_]

im not sure were u saw that but the LT/UT take more fiddling out of the box on a dual the dk will clock higher, but with tweaking and gtls the LT/UT will be better especially with a quad

took me 1 day to get my ut-p35 to 586fsb;) now i retired the board keepin it as a backup

[redphil]

personnally i wouldnt touch a dk with a quad
the lt ut p35 is the best ddr2 board better than my x38

There's a dfi x38 on the way to me, can you tell me what's worse then with the p35-Board?

[zanzabar]

the x38 NB has more overhead so it clocks a little less, but u wont even notice unless u have really good cooling

[redphil]

the x38 NB has more overhead so it clocks a little less, but u wont even notice unless u have really good cooling

ok, Thanks. :)

[zsamz_]

There's a dfi x38 on the way to me, can you tell me what's worse then with the p35-Board?

p35 goes higher fsb +higher memory bandwidth
the x38 clocks 4 sticks better + has crossfire
x38 is a great board but the p35 is just perfect

[redphil]

p35 goes higher fsb +higher memory bandwidth
How big is the overall fsb-difference between both boards?
I used an i975-board until now, so I am not used to p35/x38.

[inonefly]

took me 1 day to get my ut-p35 to 586fsb;) now i retired the board keepin it as a backup

it that with a dual core or a quad?

also if i have a q6600 and 4 sticks of ballistix, do you recommend the p35 or the x38/x48 (x48 any improvement over x38?)? thanks :)

[Loser777]

Is the DK the same thing as the DK T2RS? Asking this again... -.-'

[zanzabar]

Is the DK the same thing as the DK T2RS? Asking this again... -.-'

yes but there are 3 versions of it, so make sure it says that it has the ich9R