G.skill 8000Hz 3.3.3.9@ 595

[Nanok]

Vanovich, Noxon, and me had a great time benching with dice.
Here is what we were abel, to get out of a pair of G.skill 8000HZ
Benching on a commando and 3.375 vdimm

[Sam__]

!!!111oneone11!1!

u ran the ram at 3.375v!

awesome speed for those timings

[noxon]

Yea max ram volt in bios, dont know the exactly volt in windows, it all went kinda fast, we where short of time..

A few pics of the ram pot.

[BND|MOD]

Very nice i have the same ram jejeje

[EnJoY]

Oh my god that is extreme! :clap:

[bhavv]

Just. Simply. A.W.E.S.O.M.E!!!

Ive gotta try this when I get my new OCZ Flex II next week.....

lol, no I cant, I need it to survive for 24/7 use. Boooo!

[M.Beier]

RESPEKT !!!!

Nanok, truely amazing!
Congrats to the three of you!!
I belive the performance of those sticks at that speed will actually compete with most good DDR3 sticks !!!

Did you guys stay at Ivan's place?

[Hyperhorn]

Sick :eek:
CL3 @595 Mhz is very impressive yet, but 3-3-3 is fantastic! Congrats! :clap:

[Luka_Aveiro]

That is sick dude, would love to see it 600 :p:

:up:

[railmeat]

are they dead?lol

and how long stable is a setup like that?30 seconds,few minutes?

[Beefy22]

And now I know why the word ridonculous exists... that deserves kudos! :clap:

[alexlyc]

This is amazing! I wish I still have my HZ to play with...

[[XC] gomeler]

Holy.. how badly degraded/dead are those sticks :p: Great work guys, I'm jealous to say the least.

[Data_]

Amazing score and vdimm.....

[ZoLKoRn]

OMG!!! 595MHz C3 :eek: amazing :up:

[gundamit]

Its like going to the circus side show some days at XS. So xtremely freaky and entertaining ! Great show! :clap:

[Hazzan]

amazing ........... :up::up:great work and the best system cooling you have :up::up:

[zsamz_]

verry nice guys :up:

[noxon]

Thanks guys ;)
We were benching some hours at 3.2volt i think, and at 540-571 3-3-3-9, the best we could do was a 3dm06 at 5350mhz ~563 on the ram, pretty impressive for a E8500 at only 1.70vcore@load, spi 1m at 5421mhz 570.7fsb, 3d01, wprime, think that was all on that system.

Here is a spi ss, windows wasnt setup for spi atall, too bad. Max FSB was limited to 572, so next time we will try on another board..

[saaya]

meh, screenshot... :P
whats the max you could bench at? :)

[Nanok]

Hey, and thanks all !
I think they are still fine, but i will tjek later today.
Max Spi 1m was 581.7
http://peecee.dk/uploads/052008/screen018.jpg

[noxon]

More info and pics here from the hole event
http://www.octeamdenmark.com/forums/showthread.php?p=18666#post18666

[saaya]

1100 cas3 2k6? nice!!! :toast:

[makaka]

Damn , This was a nice run , congrats . could u please post the result with 3T @ 4.5 GHz

[Nanok]

Damn , This was a nice run , congrats . could u please post the result with 3T @ 4.5 GHz

no comprende :shrug:

[runmc]

Awesome ram pot guys :up: Xtreme Systems to say the least. :clap:

[The0men]

That is Extreme, Im yet to run a kit CAS 4 like that, mind you all my stuff is for 24/7...

Nice work though.

[Nanok]

That is Extreme, Im yet to run a kit CAS 4 like that, mind you all my stuff is for 24/7...

Nice work though.

well, tree to four hours we did not go below 3.2V :p:

[2DIFF]

Hi, congrats + the ram pot's really nice - did you build it yourself? thx

[Oliver]

Good work guys and sweet that Ivan got his e85 tested...

Keep pushing it.

[Nanok]

Hey 2DIFF the pots are homemade :-)
The E8500 was mine, Ivans E8500 was thawing up on my other Commando.
Ivans E8500 where our first choice, but the Commando we was using for the first run had coldbug on NB, secound run with my E8500 we did not want to risk dice on NB duo to time was running out, and no results to show.
Ivans E8500 has yet to be testet other than on SS.

[Oliver]

thx for information...

[bonzo_catalin]

Show us Lobby fps :) . Awsome job .

[Ming@s]

tank for Memory beautiful.

Great Job.

[sobih25]

:eek2: :worship:
nice ram-pot man!

[Nanok]

Show us Lobby fps :) . Awsome job .

Here you go m8.
http://service.futuremark.com/resultComparison.action?compareResultId=9379774&compareResultType=6

[bonzo_catalin]

Hmmm , LH looks good , but LL it's a little bit slow :(

[Don_Dan]

Hi mate, I see you received your HZ kit.... :D
Amazing results at a crazy voltage, congrats to the three of you! :up:
Any plans to go for 600?

BTW, have you tested the other kits you bought yet?

[naokaji]

580+ 3-3-3 dual channel spi stable...

:clap::clap::clap:

just :shocked:

*runs to change pants*

now aim for 600:p:

[boblemagnifique]

impressive clock !!

Are you the temp of block memory ?

[Nanok]

#38 have a p36 DQ6 comming later this week.
#39 600 was the aim :-)
#40 Im not sure but cloose to-80 i think, maybe i should buy a temp-probe for the ram pot aswell

[noxon]

Hmmm , LH looks good , but LL it's a little bit slow :(

The 01 was a bad run, i just selected all the tests, so std run order. I did get LH a bit over 600fps, cant remember LL, but no time to tweak it all. Guess a tweaked run at that speed would be around 93k.

-It was my first run in 3d01 with ati since my x800xtpe...

[bonzo_catalin]

That explained everything , maybe you will give one more try . I'm curious what is the difference between 4-4-4 and 3-3-3 at ~ same FSB .

[Nosfer@tu]

Great work boys ;)

Cool We now have a group that gets together in the Western part of Denmark :D

Already loking forward to your next session my freinds :D

[Harshal]

Ahhh just read this.... Xtreme is here :D
Super job, guys :up:

[sunny7day]

your setup looks tidy and nice.

[Ch@pS]

Holy F*** Thats just really wrong, those poor sticks, i feel for them. :(

Amazing times though, very awesome, congrats. :D Now get 600. ;)

[DoGMaN]

OMG:eek: That is so ridiculously fast:shocked::shocked::sick: Great job and that ram pot is fantastic!

[JaYp146]

This is beyond Xtreme. Awesome job, OP.

[emo]

:eek:the ram pot look very nice。the timing is so tight.:shocked:Good Job:up:

[Nosfer@tu]

I think that this thread makes Nanok my m8 PROUDE :D

he should be :D

[joshua7]

Wow. :)

[WaterFlex]

Yeah, great clock. What is PL? Show us some everest test please ;)

[WaterFlex]

So?

[Nanok]

The bench was from back in may, can not remember pl, and on stick is verry close to dead.

[WaterFlex]

The bench was from back in may, can not remember pl, and on stick is verry close to dead.

Very pitty :(
I`m looking forward to your new benches;)

[18 is # 1]

This may be a ignorant inquiry, but what happens to the condensation that forms on the electronics?

[Gothic]

Really sick clocking there m8!

Will runing your DiMMs at that voltage can cause immediate chip degradation?

I mean... it's almost twice the JEDEC spec! lol

[Nanok]

Well, two af the kit that i have been "beating" is degraded, one verry bad but they got it for 3-4 hours +3.2V
But you will get higher clock on cold also with same volt as on air.