Whats wrong with this picture

[Kristall-99]

http://img129.imageshack.us/img129/5439/47159629zn3.png

Setup
q6600 at 3.1
2 3870's crossfire 776/1126
4 gig of G.skill ddr2 1000 ( only recognizes 3gig)

Its a rather horrid score if you ask me. How can i possible score that low?

Edit-

Auto-tuning ati tools, only recognizes 1 graphics card. Could be a possible problem

[stocius]

http://img129.imageshack.us/img129/5439/47159629zn3.png

Setup
q6600 at 3.1
2 3870's crossfire
4 gig of G.skill ddr2 1000 ( only recognizes 3gig)

Its a rather horrid score if you ask me. How can i possible score that low?

Maybe your GPUs is having driver/ CF recognition issues?

[Kristall-99]

Possible, latest drivers for these with CCC, allows me to enable or disable CrossfireX

[ZOMGVTEK]

Its possible theyre not in crosfire? And your CPU is clocked a little on the low side if your looking for much better scores. You should be running 3.6 Minimum. I run 4.05 for benching on my Q6600.

[Kristall-99]

i would indeed clock my cpu high, but currently saving for water, so im stuck with the stock sink for now and at 66,64,65,64 temps wise

be back with more info tomorrow morning

[tet5uo]

It's a bit on the low side, but not drastically.. CPU speed is pretty big factor in 06 now.

[Cheffy]

did you wind the detail settings down, check to make sure AA/AF are not forced, checked crossfire enabled in drivers? made sure 1 card isnt running at pcie 1x not 16x?

[Kristall-99]

did you wind the detail settings down, check to make sure AA/AF are not forced, checked crossfire enabled in drivers? made sure 1 card isnt running at pcie 1x not 16x?


Wind, what do you mean by that?, ill make sure AA/AF aren't enabled( pretty sure it is), CF is enabled but will recheck. will go into bios to make sure both slots are at 16x when i get home, school is overrated =/

Not sure that it matters, but does it matter what slot the crossfire connector is on, currently i have it on the right if i were looking at the fan. Ive seen some pictures of people using both connectors to connect 2 cards, not sure if its needed but i have another connector if needed.

[Cheffy]

wind as in turn :)

try both connectors, it cant hurt!

[Kristall-99]

Went into bios and couldnt find anything to make sure both slots are at 16x
But i found one thing that looked like a posibility
PCI config 1x 1x, Other option was 4x NC So that wouldnt have been right.