My first Phase change "Spacemaster rotary"- thanks to LittleDevil

[Spacemaster]

This is my first Phase change
Specification:
LittleDevil's Rotary Case

LittleDevils's Evap

Universal Mounting

Rotary Compressor 12.400BTU LU-VE STVF 139 1.4kW

Condensor Termometer Eliweel EM 300 Tuned for 250W at -52°c


http://spacemaster.sx-team.com/Testovi%20Sajt/Hla%f0enje/Fazno%20promenivo%20hla%f0enje/slike%20ld/Male/9.jpg

SX-Team review but in Serbian language ;)
Here (http://www.sx-team.com/index.php?option=com_content&view=article&id=79:fazno-promenljivo-hlaenje&catid=38:testovi&Itemid=57)!

[n00b 0f l337]

Looks nice! Dimensions?

[runmc]

That is very nice!! Ales does great work - :up:

[{.bLanK} GoD]

Got a quad killer? Spacemaster does ;)
Nice unit, and big to boot!

[killermiller]

One day my single stage will grow up to be a "Spacemaster Rotary"

[Spacemaster]

Looks nice! Dimensions?

350x350x550mm


That is very nice!! Ales does great work - :up:


Got a quad killer? Spacemaster does ;)
Nice unit, and big to boot!


One day my single stage will grow up to be a "Spacemaster Rotary"

Thanks mates ;) :up:

[mytekcontrols]

Another very clean build. fantastic :up:

BTW; where do you get the flexline sleeving from?

[n00b 0f l337]

That's easy Mytek, its called expanding braid normally or wire loom.
http://stores.ebay.com/Genuinedealz
Thats my guy ;)

[Marvin]

1.75 insnt to large for this kind of insulation?
1.5 sounds better...

[n00b 0f l337]

Thats flat across, so 3.5" diameter, divide by 3.14 and you get...
1.15" diameter tube. So nope, works absolutely perfectly for single stages and expands enough for cascade ;)

[mytekcontrols]

That's easy Mytek, its called expanding braid normally or wire loom. http://stores.ebay.com/Genuinedealz

Thats flat across, so 3.5" diameter, divide by 3.14 and you get...
1.15" diameter tube. So nope, works absolutely perfectly for single stages and expands enough for cascade
Hmmm... I'm afraid this would be too small for what I needed (using double wall insulation: Inner = 0.5" ID x 3/4" wall, with outer = 2.0" ID x 1/2" wall, total OD = 3.0"). Presently the braid I do have, is a bit on the too big side, just looking for a better solution.

Sorry for the :off:

Edit: My actual insulation diameter is more like 2.75" due to the fact that I used a slightly smaller ID on the outer insulation which sqeezed the overall size down a bit.

[n00b 0f l337]

Should work actually Mytek, this stuff expands like all hell. If you'd like I'll measure for ya tomorrow.

[mytekcontrols]

Yes please do :)

I also found this: BRAIDED-NYLON-SLEEVING-1-25-OD-X-250-FT-LONG (http://cgi.ebay.com/BRAIDED-NYLON-SLEEVING-1-25-OD-X-250-FT-LONG_W0QQitemZ250235542542QQihZ015QQcategoryZ4667Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem)
Way more than I need, but it's white (which would look nice with my case).

Let's move this over to my autocascade thread.

Sorry Spacemaster :(

[n00b 0f l337]

Hahaha yep sorry for off topic, I got that same white stuff in same size reel, if ya need I'll measure that as well.
Sorry again!

[boshuter]

Yes please do :)

I also found this: BRAIDED-NYLON-SLEEVING-1-25-OD-X-250-FT-LONG (http://cgi.ebay.com/BRAIDED-NYLON-SLEEVING-1-25-OD-X-250-FT-LONG_W0QQitemZ250235542542QQihZ015QQcategoryZ4667Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem)
Way more than I need, but it's white (which would look nice with my case).

Let's move this over to my autocascade thread.

Sorry Spacemaster :(

Here is a better place for the sleeving if you want a choice of colors and sizes http://cableorganizer.com/braided-sleeving/
they also have colored heat shrink and about anything else you could need.

[mytekcontrols]

Thanks boshuter, that's a great place! :)

[teyber]

www.wirecare.com

[dinos22]

wow single stage at such cold temps with 250W load

let's see it in action :up:

[killermiller]

let's see it in action :up:

I agree.

[Spacemaster]

http://www.sx-team.com/index.php?option=com_content&view=article&id=79%3Afazno-promenljivo-hlaenje&catid=38%3Atestovi&Itemid=57&limitstart=9

I am waiting E8500 to test this mama :)