Stock 9700Pro voltages...

[Stang_Man]

this is what i measured today:

vgpu = 1.56v

vdd = 3.00

vddq = 2.86

vref = 1.46


now, for GPU, i plan on getting around 1.77v or so to it, so what OHm resistor should i use ? (i know 10k pot, but what resistance should that be set too?)

and for the rest, what are good values to set them too?

[Ragnarok]

1.77 is a bit too high man.. even with watercooling..

but if u want, go for a 3K resistor... (ur card is already overvolted by default)

[Stang_Man]

heh

today i got done with the VDD and VGPU mods..

1.62v to the GPU and 3.08v to the VDD


used a 10k OHm potentiometer on the GPU set to 8k OHm..

i'm also using a 10k OHm potentiometer with a 3.5k safety resistor for the VDD.

haven't had time yet to test out what this has done for me, but i'll definitely keep anyone who's interested posted:)

that 1.77v was what i planned with an 80watt TEC.. MickeyMouse is using 1.81v on that

now, how about the other mods? the only 50K i can find is a linear-taper (really bulky)

i'm thinking about using a 47k OHm resistor with a 10K OHm potentiometer on the VDDq and VREF, but not sure what i should set the resistance too on both of them.

if anyone can help me out with the above^^ i'd greatly appreciate it:)

[NoStra]

Originally posted by Ragnarok
1.77 is a bit too high man.. even with watercooling..

but if u want, go for a 3K resistor... (ur card is already overvolted by default)

LOL I run 1.87V with aircooling. Is that serious WAY to high?
How high can I go with the memory? It is Hynix 3.6ns.