2longs enclosure

[[XC] 2long4u]

Ice anyone?
75301

75302

75303

75304

[[XC] 2long4u]

Or White????
75305

75306

75307

75308

75309

[s0lid]

MAN! That is SOOO coool :D

[Pete]

Love the location of the LED's, about time someone put them there.

Looks good, 2 part then glued togther?

[[XC] 2long4u]

Yes.
It is machined so close the glue didn't penetrate all the way. The next one I will apply the glue before I assemble it.

I may try to cast it, but I'm not sure how strong the tube part would be.
It would be easy to make it thicker in the cast but it would take away some of the insulation.

[n00b 0f l337]

Nice, makes it cheap to make too, flat plate top with a ring, then a tube that you have to cut. I Like.

[Pete]

2Long

Location: At yo mama's house

Ya not as i'm there now, but really where are ya. Mega intrested in one of these for a customers build.

[killermiller]

2long is in Sacramento, CA USA.

[Sly Fox]

Looks awesome, nice work man.

[Duniek]

thickness :eek:

awesome mounitng, I love that :D

[Jack]

How did you make the holes for the leds? You can´t reach that with an ordinairy drill... :shrug:

[Duh]

arent those just a copy of ssilencer??

[killermiller]

arent those just a copy of ssilencer??

Uh-oh, its the SSilencer fan club.:rolleyes:

[runmc]

arent those just a copy of ssilencer??

http://www.xtremesystems.org/forums/attachment.php?attachmentid=75394&stc=1&d=1206754349

http://www.xtremesystems.org/forums/attachment.php?attachmentid=75395&stc=1&d=1206754728

Yeah I would say he stole it. Look at them, they are exactly the same.:eek:

[DarthBeavis]

http://img265.imageshack.us/img265/3912/dsc02440kf5.th.jpg (http://img265.imageshack.us/my.php?image=dsc02440kf5.jpg)http://img116.imageshack.us/img116/6030/dsc02449fe9.th.jpg (http://img116.imageshack.us/my.php?image=dsc02449fe9.jpg)http://img264.imageshack.us/img264/6259/dsc02448gw9.th.jpg (http://img264.imageshack.us/my.php?image=dsc02448gw9.jpg)

[[XC] 2long4u]

Hey, the only one ive seen from ssilencer is LGA775 only, and was shaped like an X.

[DarthBeavis]

2long4u;2876665']Hey, the only one ive seen from ssilencer is LGA775 only, and was shaped like an X.


I love SSilencer's stuff but I would still be proud to sport 2Long4u as well.

[[XC] 2long4u]

Aww, thanks guys. I try to do a good job and make things look nice. Eric deserves some credit for the machine work.:clap:

[[XC] 2long4u]

How did you make the holes for the leds? You can´t reach that with an ordinairy drill... :shrug:

Trade secret. :rofl:
Not too hard just takes patience.

[killermiller]

I would like to get my hands on some dental drills.

[teyber]

hey 2long4u: only resemblance is how they both hold down a CPU, so i guess you copied all enclosures :p:

great work mate! what glue are you using? i highly recomend weld-on #4 or so. Less bubbles. You need to sand it completely flat to avoid those bubbles. They are not noticeable though...

Regards

[killermiller]

The only similarities are that it it is clear and has LEDs. He was creative enough to make one, that is all that matters.

[N3RO]

Love the location of the LED's, about time someone put them there.

Looks good, 2 part then glued togther?
Just did this before ;)

[teyber]

ack, sorry word i blanked on was crazing... Just sand it down before you glue to prevent crazing.

Regards

[[XC] 2long4u]

It's not actually glue it more of a solvent. Kinda like acetone.

[Duh]

http://www.xtremesystems.org/forums/attachment.php?attachmentid=75394&stc=1&d=1206754349

http://www.xtremesystems.org/forums/attachment.php?attachmentid=75395&stc=1&d=1206754728

Yeah I would say he stole it. Look at them, they are exactly the same.:eek:

yep, the same thought here.. although i understand XS limitations to manage copies and so of unit designs ,and that in this case it is not intended to be sold; ain`t it seen bad by the rest of the community??
take this example: chilly1 evap: instead of making a copy of his evap without even asking him, wouldnt it be more polite/gentle or what ever to ask him?? Do not know if he asked ssilencer as I am not his partner or something similar. I just respect his work and love what he does with the little resources available in our country

Uh-oh, its the SSilencer fan club.:rolleyes:

its the : I respect people creativity and craftsmanship club... why are you so ironic and mean?? Is there any need??

hey 2long4u: only resemblance is how they both hold down a CPU, so i guess you copied all enclosures :p:

great work mate! what glue are you using? i highly recomend weld-on #4 or so. Less bubbles. You need to sand it completely flat to avoid those bubbles. They are not noticeable though...

Regards
:shakes:

[teyber]

Duh: is there another revision of the ssilencer mounting that i have not seen? as i think the only resemblance is the acrylic.

BTW i love tiesto

[killermiller]

hey 2long4u: only resemblance is how they both hold down a CPU, so i guess you copied all enclosures
:shakes:

:confused:

The only similarities are that it it is clear and has LEDs. He was creative enough to make one, that is all that matters.

:rolleyes:

I am not mean. It just that every post I see of yours, it is :worship: SSilencer. AFAIK he doesn't have an international copyright or trademark on clear plexi with LEDs.

[[XC] 2long4u]

SSilencer's mounts only on one socket, LGA 775. If anything I got the design from this. I told Eric I wanted one shaped like the swiftec with a different curve on the side. I think its nothing like SSilencer's :P
75480

[Felipe]

nicre enclouser :p

[Duh]

2long4u;2881042']SSilencer's mounts only on one socket, LGA 775. If anything I got the design from this. I told Eric I wanted one shaped like the swiftec with a different curve on the side. I think its nothing like SSilencer's :P


http://www.xtremesystems.org/forums/showthread.php?t=95293&highlight=daddy

:rolleyes:

[teyber]

please stop mate. I read through the entire first post, and aitors work is incredible, but very different then this. Besides led's and acrylic, I think thats it.

Peace

[killermiller]

http://www.xtremesystems.org/forums/showthread.php?t=95293&highlight=daddy

:rolleyes:
:down:

Why don't you go post there then?:confused: :confused: :confused:

[killermiller]

What are you going to use as insulation around the evap? What evap are you planning to use?

[[XC] 2long4u]

Maybe a 2 part epoxy insulation. I will have to look into it.

[[XC] 2long4u]

BlueGreen maybe?
76141

76142

[[XC] gomeler]

YGPM ;) Very slick stuff there.

[gosmeyer]

Sweet!:D
Like Adam said, easy to manufacture and thats always a plus:yepp:
It would be a real beoych to polish the finish marks out of a circular interpolation for I.D. or O.D or turning for that matter.
Well done !

[[XC] 2long4u]

The dull finish is a plus since clear won't reflect the light from the LED's.
I was thinking on making the bottom dull so the whole thing would glow. I will have to find somebody with a sandblaster tho.

[gosmeyer]

2long4u;2902573']The dull finish is a plus since clear won't reflect the light from the LED's.


True enough if everyone is down with LED's, if not it looks like what it is. Rough:shrug:

I do think a bead blasted one would look pretty tough:yepp:

[[XC] 2long4u]

I could make one crystal clear. It would be more work tho. :down:

[{.bLanK} GoD]

it looks like what it is. Rough:shrug:

Don't talk crap. That is far from rough.
Nice job 2long.

[gosmeyer]

Don't talk crap. That is far from rough.
Nice job 2long.

Relax dude, I'm talkin surface finish. I dont talk crap! Where the pc was machined, the finish is rough. sorry, it just is. ie drilled holes and groove for tube. A polished surface there would be a pain in the rear, been there done that. Kinda thought i said i liked it:shrug: