Wierd reboot issues?

[Circaflex]

Some of you probably saw my thread of leaking service valve, buddy came over today and i dont know what he did but it isnt leaking anymore. So im messing around and i restart my pc and instead it shuts down and my unit goes into the safety delay. A while back when i had it running it would restart like normal and be fine, any ideas what is happening?

[n00b 0f l337]

What motherboard?

[Circaflex]

abit ip35. It actually just BSOD'd and instead of just rebooting it completely shut off and the phase unit went into safety delay.

[n00b 0f l337]

Check condensation, using grease in the socket? Doubt its the unit or controller. Are you at stock? What voltage you been running?

[Circaflex]

Grease in the socket, around the socket. 4ghz @ 1.6 vcore. Controller shows -19/-20.

[n00b 0f l337]

Go back to stock, sounds like when you let out gas to combat overcharge, and then had the leaking schrader, that your now undercharged.

[killermiller]

You probably vented too much and now it won't hold load.:shakes:

Go back to stock, sounds like when you let out gas to combat overcharge, and then had the leaking schrader, that your now undercharged.

This is why people who don't know what they are doing should not be making adjustments. Who wants to make $10000 and report ciraflex to the EPA. They will Subpoena XS for his IP and then subpoena his ISP for info.

He was warned several times in his other thread here.

http://www.xtremesystems.org/forums/showthread.php?t=179844

[Circaflex]

i didnt vent anything? get your panties out of a bunch killermiller, i never ended up venting anything its still over charged and i have been talking with jinu to get it recharged/retuned. IM just trying to get my computer to finally start up.

[n00b 0f l337]

I'd set back to stock and see what evap temp you come out with. And lower the OC as you could be possibly burning the chip at 1.6vcore. Everyones different.

[Circaflex]

Ill give that a try, last time i ran it at stock the controller showed -23/-24 ill give that a try though and see where it gets me.

[Moc]

lol... you will not kill a CPU with -20°C evap and 1,6V....

[killermiller]

Well a convenient leaking schrader valve a week after you are asking about venting sound like venting to me.

[Circaflex]

the fact that when my buddy came over to look at what he could do, took the valve off and it started to hiss right away and put it back on then isntantly pm'd gomeler jinu and a few others to get it fixed and retuned. Id ask you stay out of my threads from now on.

[killermiller]

I just call it as I see it.

Some of you probably saw my thread of leaking service valve, buddy came over today and i dont know what he did but it isnt leaking anymore.

Is your buddy qualified?

[Circaflex]

He is, he does refrigeration for a living. Although he does this i was given advice on this forum that the way they charge and retune is different than what we use for SS and what not so i never bothered him. All he did was fiddle with the pin and it quit hissing. The unit is showing -24,-25 on the controller at stock.