Muskin 3500 2-2-2 overclock well??

[Rams662566]

Im trying to decide on what memory to buy and was wondering if any of you have had good OC's out of this memory. I have a 2.4C, Abit IS7 (had OCZ 3700 Gold that Im RMA'ing because I cant use the dividers) right now Im running Corsiar 2700 XMS at a 250FSB with 3:2 divider. I would like to get as close to 300FSB as possible with the 5:4 divider. Thanks.

[Creative]

Can I get mushkin in Australia does anyone know?

Looks like they are getting a name for themselves again...they kinda disappeared for a year or so :D
hehehee

Cheers
:)

[Snoozy]

2-5-2-2 timings @ 208 FSB

2.4C @ 3.1 with 5:4 divider

I'm stable at 3.6, just need better cooling :) This stuff kicks ass.

[Creative]

2-5-2-2 @ 208 doesnt kick ass in my books :D:D (1:1 or 5/4 divier mode)
hehehehehehe

Anyways, I found some of this stuff here local in Aussieland at Gamedude guys :)

DDR-DIMM 256meg x 2 (512meg) MUSHKIN DDR433 BLACK LINE Hi Performance LEVEL1, Rated 2-3-3, 6 Layer PCB with Heatspreader hand tested in Dual Channel Mode. $299

To the people that have these sticks...are these the right ones? Cos at $195USD for the 2x256 pair...thats a steal!!!!! :banana:

[Arsenal]

Originally posted by Creative
2-5-2-2 @ 208 doesnt kick ass in my books :D:D (1:1 or 5/4 divier mode)
hehehehehehe

Anyways, I found some of this stuff here local in Aussieland at Gamedude guys :)

DDR-DIMM 256meg x 2 (512meg) MUSHKIN DDR433 BLACK LINE Hi Performance LEVEL1, Rated 2-3-3, 6 Layer PCB with Heatspreader hand tested in Dual Channel Mode. $299

To the people that have these sticks...are these the right ones? Cos at $195USD for the 2x256 pair...thats a steal!!!!! :banana:

Nah you need the LEVEL II stuff.. and even if you did find some of that, i doubt it would be significantly better than what your kingston stuff seems to do.

[DoGMaN]

Mine won't even do 210Mhz at rated timings. In my opinion this stuff is not worth the money.

[Creative]

Interestingf

Maybe might lay off it for awhile then :D
heheheh

[The Runner]

hey, does anyone know what the 512mb Level 2 PC3500 modules O/C like?

And what about the PC3200 Level 2 variants? (256//512)

any info? thx.

[retrospooty]

Originally posted by DoGMaN
Mine won't even do 210Mhz at rated timings. In my opinion this stuff is not worth the money.

If yours wont do 20 at 2-2-2, then call mushkin and send it back. Its gauranteed to do 2-2-2 at 217mhz.

[shidokanjohn]

246 FSB 2-2-2-5 with kingston pc3200 but with BH-5 winbond chips
If you can find two of them go for it and here in Greece cost only 70€ each....
Btw with 3.2 volts i forgot to write
they can hit 230 with 3.0:):D

[Tuvok-LuR-]

My Sticks
2x256 Mushkin Black PC3500 (BH-5)
1:1 3.2 2-5-2-2 hit 245 fsb 3d stable ;)

[saaya]

didnt muskin buy all bh5 stocks winbond had? guess this is what they made out of it...

[xgman]

2 -512's seems to need a bit lower timings to be completely stable in dual sync NF7-S. 227-230fsb at 2.9v 11-3-3-2

[xgman]

Originally posted by saaya
didnt muskin buy all bh5 stocks winbond had? guess this is what they made out of it...

buffalo got a good deal of it as well.

[petervandamned]

mushkin dual channel 2 * 512 mb 3500 level 2
fast settings 2-2-2-5
epox 4pda2 rev 2
12 times 295 fsb 5:4 dev

not bad in my opion
new from the box :)