Radeon OC show off

[\/icious]

not sure if one of these has been started but here we go. Show us whatcha got.

bba 9800np
432/335
stock

will be doing vmods and better cooling soon

[afireinside]

Spahire 9800np
stock/stock
:D
:slobber:

I don't really want to OC it till I get my chilled water on it :D
**mutter**now if only someone would tell me what water blocks to buy**mutter**

[q149]

457/796 on a 9700 Pro.. it's a PoworColor:eek:

[luihed]

BBA 9700pro at 465/720.....:D

[ellsworth]

could we list cooling too? and maybe vmods or no vmods

[q149]

Mine has Vdd/Vddq/Vgpu/Vref mods.

[piercedandtatto]

9800np bios flashed to pro bios...460/380
not completely stable but i can complete 3dmark 2001 at those speeds. this is stock cooling and no v mods
Every day use is 440/350

P.S for those of u with a 9800 np, the bios flash gave me an extra 30 mhz max overclock on the memmory. before the flash i could only get 350 or so.

[STEvil]

380/349 is about the max mine will do right now..

9700np.

[Spec3]

401/366

9700AIW pro

I think I am the only person around overclocking the AIW card. I wish I could find the place to measure the gpu voltage on this thing so I could do the gpu volt mod :(

Steve

[kokoro_kara]

385/315 9500pro warpbios w/ hynixram

Water cooled.

After seeing the temps at stock on this card I higly suggest serious cooling (non stock) if you are going to OC.

no mods

k

:toast:

[luihed]

BBA 9700pro
mcw-50 with chilled water
vmod to 2v
465/360 3dmark01 358/360 for nature

http://service.futuremark.com/compare?2k1=6844194 #4 in the orb :D

[DeForce]

450/390 Sapphire NP Bios flashed to Pro. Not a pretty 3dmark but it ran. Stock cooling no mods

[Narbo]

Sapphire 9500 pro w/9700 pro bios
340/314
stock cooling

kokoro_kara what do you suggest for cooling? I have noticed the memory gets scorchingly hot after sustained heavy use. I have to clock it back a bit in certain games while using FSAA features because I think the memory is overheating and I get artifacts or the game locks up. Maybe I can try to rig up a fan blowing air over the top of the card?

[\/icious]

Originally posted by ellsworth
could we list cooling too? and maybe vmods or no vmods
This thread is for showing off your card so list it all :thumbsup: :thumbsup: :thumbsup: :thumbsup:

[Pejsen]

Originally posted by luihed
BBA 9700pro
mcw-50 with chilled water
vmod to 2v
465/360 3dmark01 358/360 for nature

http://service.futuremark.com/compare?2k1=6844194 #4 in the orb :D

I dont think that the information you get when you search for Radeon 9700 Pro is correct... my score @ 21239 is not there :confused:

[luihed]

Originally posted by Pejsen
I dont think that the information you get when you search for Radeon 9700 Pro is correct... my score @ 21239 is not there :confused:

all benchies done before july 18 or so got bumped to the 9700np category...... thats why int the 9700pro, im #1 but I know theres 3 higher scores out there and theyre all at the 9700np category.....

[Pejsen]

Originally posted by luihed
all benchies done before july 18 or so got bumped to the 9700np category...... thats why int the 9700pro, im #1 but I know theres 3 higher scores out there and theyre all at the 9700np category.....

yeah i get it now... well im sorry that my 9700pro went to the grave but i have a Tyan Radeon9800Pro coming tomorrow! :banana:

[r00t3d]

Connect3D 9800 Pro 128mb currently doing 460/375 stock cooling, its gonna get a mcw-50t with chilled water, to get over 500 on the core, currently does 22429 in 3dmark :p

[dttdar]

478/365 with vgpu mod and vmem mod. this is on air with a dynatron rackmount cooler and some tweakmonster ram sinks.

vgpu=1.94v
vmem=3.05v

[FUGGER]

573/430 9800Pro

Not a typo

[ellsworth]

jeebas fugger...:slobber: :slobber:

details?

[xtreme]

hmm seems my OLD (:( ) card is the king...
476/357 on PLAIN(!!!) water. no tec, no evap, just 0815 watercooler...
http://service.futuremark.com/compare?2k3=429109

too bad, i selled this puppy :smileysex:

@ Ellsworth

DI.FM roxxxxx :D

[ellsworth]

DI.FM roxxxxx

YES!! :eleph:

[luihed]

Originally posted by FUGGER
573/430 9800Pro

Not a typo

You mean you cant even break 600core on that? lol..... seriously though thats an awesome overclock... highest Ive seen....:toast:

[freeloader]

Radeon 9600Pro
515/310 (stock cooling). No artifacts or lockups!

[kromosto]

9700pro stock volt stock cooler
391/345 no artifacts but its not stable or artifact free if i raise 1 mhz

[DarKcyde]

Originally posted by Spec3
401/366

9700AIW pro

I think I am the only person around overclocking the AIW card. I wish I could find the place to measure the gpu voltage on this thing so I could do the gpu volt mod :(

Steve

I got a 9700pro AIW too!

I never tried OC'ing it much, I only got the stock hsf on it right now. I think I did 370/350 but I was just goofin off, wasnt really trying. Bought some tweakmonster BGA sinks for the mem, and I have a prommy I'm gonna try mount on the gpu. Been playin w/ the mobo and cpu lately, ignoring the vid completely.

Any vmod info for a 9700pro AIW welcome!

[Spec3]

Originally posted by DarKcyde
I got a 9700pro AIW too!

I never tried OC'ing it much, I only got the stock hsf on it right now. I think I did 370/350 but I was just goofin off, wasnt really trying. Bought some tweakmonster BGA sinks for the mem, and I have a prommy I'm gonna try mount on the gpu. Been playin w/ the mobo and cpu lately, ignoring the vid completely.

Any vmod info for a 9700pro AIW welcome!

Nice nice. I have a mcw50-t on mine and OCZ flower sinks on the ram. I just wish I could do the vgpu mod to get higer core #'s

I posted up asking here so hopefully someone will help us out :D

http://www.xtremesystems.org/forums/showthread.php?s=&threadid=18131

[Stang_Man]

ok guys, farthest i can get up to now is 378/325. this is with just an AMD retail heatsink and fan on the gpu.


now, if i bench at a higher gpu, i start seeing little black dots everywhere.. does this mean i need more voltage, or better cooling??

[Stang_Man]

Originally posted by DarKcyde
I got a 9700pro AIW too!

I never tried OC'ing it much, I only got the stock hsf on it right now. I think I did 370/350 but I was just goofin off, wasnt really trying. Bought some tweakmonster BGA sinks for the mem, and I have a prommy I'm gonna try mount on the gpu. Been playin w/ the mobo and cpu lately, ignoring the vid completely.

Any vmod info for a 9700pro AIW welcome!

ramsinks don't do crap..

just to let you know.

higher the gpu, higher the mem, it's been PROVEN many times!! don't void the warranty on little ramsinks

[kokoro_kara]

Originally posted by Narbo
Sapphire 9500 pro w/9700 pro bios
340/314
stock cooling

kokoro_kara what do you suggest for cooling? I have noticed the memory gets scorchingly hot after sustained heavy use. I have to clock it back a bit in certain games while using FSAA features because I think the memory is overheating and I get artifacts or the game locks up. Maybe I can try to rig up a fan blowing air over the top of the card?

I'm running a dangerden water block on mine and just regular case air flow. What I did before going to WB is I had just as you said, a fan blowing on it. I actually had an internal 80mm fan centered at about the 2nd pci slot below the Radeon card. That way a lot of air would be hitting the card and much of it underneath while my case fans should pull the heat from above. I noticed a good 20c to 30c drop in temps acc to the enermax ( I don't trust fully since it's probably influened easily by air blowing on the temp reader as well ;)

Since I have it WB I have noticed one thing very interesting, the end of card towards the video output produces much heat. It is still warm with my WB cooling. Quite a bit warmer than my gpu. So, being long winded, air blowing on the entire card would propably even benifit my card some more.... except the noise :D

Ram sinks I wouldn't particular worry about... if the Ram getting hot, it's from the card and the gpu heat not the actually RAM heating up. Atleast mine aren't hot :cool:

Hope this helps, and do a search on cooling your gpu. There are several methods of just augmenting your already existion HS or putting on a different HS. Look around there is much fun stuff

:toast:

[\/icious]

nice keep em coming

[mrzee]

9800 Pro, 508/378
see sig for cooling
http://service.futuremark.com/compare?2k1=6924628

[toymaker]

ATI R9800 Pro, 472/769.
left half of a Zalman heatpipe cooler + 70mm fan.

http://service.futuremark.com/compare?2k1=6926363

[FragMagnet]

Built by ATI
9700P -11
Stock - 405/365
Intel FC HS/F - 415/365
TT ramsinks - 415/365 (yes the ramsinks were lapped flat :mad: )

Sapphire 9800P
Stock 475/370
Intel FC HS/F - 495/370
TM copper Ram Sinks - 495/395 (lapped) sorry Stang_Man
Wblock 515/395
1.83v on GPU 535/395

The 9800 was the first card out of 6 that I've added ram sinks too that actualy gained any mhz :D

[synth]

R9500np (256mbit version)
408/325

still finding the max stable am going higher....

[bigballaga]

Originally posted by FUGGER
573/430 9800Pro

Not a typo


GD man,,, 35k+ in 3dmark,,


prometia ???

[thetruememphis]

410/380 9700pro w/vmods

[macci]

sapphire 9800pro at 590/423 for aquamark3 ;)

[Marci]

Sapphire Radeon 9700 Pro
420/351 w/vmod & 80w TEC on GPU. No mem mods yet.

Only fitted TEC last night so probably loads more left in core... that's just what I was tittin around at... got me 20500 3DMark2k1SE, not had chance to publish yet.

[eva2000]

ATI 9800NP unmodded stock = 450/339 to 459/353 depending on the app

[althes]

ATI Radeon 9800Pro 450/360 for 3dmark03 only.:D

[bigballaga]

which 9800pro should i get??? i want to oc it to hell

i cant pick between a saphire, hercules, tyan, powercolor or one built by ATI to spec ????

thankX

[ALT-F13]

Sapphire R9800Pro
520/400 - wcooled, copper heatsinks on ram, 3x 80mm fans, Vgpu=2.05V, Vmem=3.1V, Vref=1.5V.
I can get 542 core with waterchiller but haven't bench it yet... Card is dead and i'm repairing it. Plus i've got 2.5 ns ram from FX5600U that did 900MHz without vmods... Gonna re-solder it on monday if i could manage to repair my raddy.

bigballaga
Any brand you choose is it a matter of luck that u'll get nice card. Built by ATi or Sapphire are probably most popular...

macci
aiming for 600MHz;)?

[bigballaga]

yea the SAPPHIRE OEM RADEON 9800 PRO 128MB is the cheapest on newgg........i think im going to pick this one up, what do ya'll think ???
http://www.newegg.com/app/ViewProduct.asp?catalog=48&DEPA=1&submit=property&mfrcode=0&propertycode=&propertycodevalue=4632,3668

[G H Z]

Sapphire 9500 @ 444/330, Infineon3.3

Modified Air cooling with TT Chrome Mini Orb.

G H Z

[STEvil]

Update:

ATI 9700np @ 430/345 1.8v gpu, mem stock.

Are there two vmods for the gpu and two for the ram?

[\/icious]

Originally posted by ALT-F13
Sapphire R9800Pro
520/400 - wcooled, copper heatsinks on ram, 3x 80mm fans, Vgpu=2.05V, Vmem=3.1V, Vref=1.5V.
I can get 542 core with waterchiller but haven't bench it yet... Card is dead and i'm repairing it. Plus i've got 2.5 ns ram from FX5600U that did 900MHz without vmods... Gonna re-solder it on monday if i could manage to repair my raddy.

bigballaga
Any brand you choose is it a matter of luck that u'll get nice card. Built by ATi or Sapphire are probably most popular...

macci
aiming for 600MHz;)?

so you took the memory from your 5600 and put it on your 9800?

[corrupt]

9800pro
530/371
with 1.9v
and water cooling only.

[faruquehabib]

radeon 7000 32mb stock 142/142 @ 225/167 stock passive heatsink muahahahahaha

[XtremepH]

9800np 420/360 stock cooling

[Vanrick]

Sapphire ATI Radeon 9500 Pro softmodded Bios w/ BGA ramsinks

(385/320) :D I dont really need anymore, Half-Life 2 here I come!

[faruquehabib]

also bba radeon 9800pro 423/366 stock

[Stang_Man]

Originally posted by Stang_Man
ok guys, farthest i can get up to now is 378/325. this is with just an AMD retail heatsink and fan on the gpu.

with 1.7V on the core, and 3.15V on the mem, i can get a max of 411/344.

this is with the same AMD heatsink,