Is my temperature good or bad?

[Tw1st3d]

Hi

Now i want to know sure if my temp's are okay or just plain crap..

My loop components:

Swiftech Apogee GT
Swiftech MCR 220 and a Magicool 120 (without the magicool is load temp is 4 celcius higher)
DDC 1T (10 watt)
EK Multi Res 150

So its a CPU only loop.

The CPU is a Pentium Dual Core E2160 @ 1.8 ghz stock

Now OC'ed to 3.2 ghz at 1.35 volt

Here is a screen of 1 hour and 20 min ORTHOS and CoreTemp showing 53 celcius - ambient is around 20-22 celcius

http://img256.imageshack.us/img256/2039/loadtempga9.jpg (http://imageshack.us)

Does is look okay or !?


- Tw1st3d

[Grafton]

Whats your abient temp ?

[Tw1st3d]

Whats your abient temp ?

Oh i forgot..

Around 20-22 celcius ambient

and its a Apogee GT

[jonny_ftm]

That's a 77% OC, so really good temperatures you have. You can't compare to a E6850 for voltage/frequency/temperatures. But for the vcore and OC percentage you got, you're still cool. You can push it to near 60-70°C as it is a 65nm chip. Under your setup, you could easily push it to 3.4GHz, it's the ususal limit for that CPU (88% overclock)

[taylormsj]

I have my pentium E2160 @3.2 GHz, 1.475 V and i get around 46 C cores, with the same ambients,

What fans are you using? they seem a bit too high, maybe a re mount of the block, any air bubbles left in there?

[Tw1st3d]

That's a 77% OC, so really good temperatures you have. You can't compare to a E6850 for voltage/frequency/temperatures. But for the vcore and OC percentage you got, you're still cool. You can push it to near 60-70°C as it is a 65nm chip. Under your setup, you could easily push it to 3.4GHz, it's the ususal limit for that CPU (88% overclock)

Okay :) It needs quiet a lot more volt to run at 3.4 ghz so i'll keep it at 3.2

[jonny_ftm]

:)

Yep, and not all CPUs are the same. Also, taylormsj, you have a D-Tek with the nozzle (more efficient) and only one radiator instead of 2, so suerely less restriction. But overall, he has really good temperatures for his setup

[[XC] NetburstXE]

Agreed. Those are very good temperatures for that kind of OC.

[Tw1st3d]

Agreed. Those are very good temperatures for that kind of OC.

Thx.. No more doubt from here :D

Very happy for little cheapy CPU makes 105xx point in 3dmark2006 with HD3850 OC'ed a bit :)