PDA

View Full Version : Prommy MACH II Info



Creative
08-19-2003, 02:10 AM
Heya guys,

We downunder are placing our orders for our prommys in the next day or 2 and I was wondering if you could give me links etc for various Prommy info pls?

Ive searched the forums and found a bit, but not as much as I need or want. Just thing like; mods for fitting it with a Lian Li case, eg the mobo tray and anything elese......How the software works and looks in Windows......just things like that :)

Most of the guys are just ordering the unit and lcd and elight case, but personally Im going all out and splurging on the unit, LCD and a black Lian Li conversion kit cos Ill be coupling my MACH II with a Lian Li PC61 :)

I appreciate in advance any help and/or links you guys can supply me with...also if you guys could maybe post pics of your cases if you have modded them and riced them up a little pls.....and then if you give me permission, I can post them on the OCAU forums for the buyers to see just how purrrdy they can make thier setups :banana:

Cheers guys and thanks :)

bowman1964
08-19-2003, 01:58 PM
Well i am not much help,
but if you can use any of the pics i have posted showing the insides and such,you can use them if you like to.

have fun :banana: mach II's are nice:D

Marci
08-19-2003, 03:44 PM
feel free to use any of the pix in this thread (http://forums.over-clock.co.uk/cgi-bin/ikonboard/ikonboard.cgi?act=ST&f=19&t=125)

Pedro Rocha
08-19-2003, 08:01 PM
Originally posted by Creative
Heya guys,


Most of the guys are just ordering the unit and lcd and elight case, but personally Im going all out and splurging on the unit, LCD and a black Lian Li conversion kit cos Ill be coupling my MACH II with a Lian Li PC61 :)
:)

Good choice :)

This is my unit, your should be similar..


http://pprocha1.no.sapo.pt/MachII_TubPos1.jpg


http://pprocha1.no.sapo.pt/MachII_Display1.jpg

:)

Creative
08-19-2003, 08:02 PM
MEga appreciate that bowman and marci :)

(Pedro got his post in as I was writing mine :D Thanks to you too :) )

Ill be sure to go thru everything, you guys are tops :)

Cheers

Creat

Creative
08-19-2003, 08:06 PM
Actually also guys, or mainly Pedro, if you have the time, are you able to post some more screenies of your Vapo pls? It looks pretty nice wth the Lian Li kit etc :)

Also do you have any pics of the software in Windows? Ive tried looking and have found a few of yours already :)

Cheers again

Tingle
08-20-2003, 09:23 AM
Hi,

I have just for some strange reason decided to take the plunge and go down this route.

Can someone tell me - are the motherboard stands in the lian li PC65 high enough to fit the prommi under cap thing on?

Thanks

Vatt
08-20-2003, 02:47 PM
Originally posted by Tingle
are the motherboard stands in the lian li PC65 high enough to fit the prommi under cap thing on?

No, the motherboard will be bend.
I have cut out a piece of the motherboard-tray so the heating element at the bottom will fit the hole I cut.

Tingle
08-20-2003, 02:51 PM
Grrrrrrrr just what i want to hear!

thanks for the reply

RaZoR
08-20-2003, 04:11 PM
Thanks Vatt, that's good info. I'm saving up for a Prommie Mach II. Not such a bad thing to open up the tray. Makes it easier to access the back side of the Prommie mounting hardware.

Creative
08-20-2003, 08:36 PM
And while you have the tools out, it could be a good idea to vut a hole into the bacxk of the tray for easy access to the NB too ;)

Thanks and keep em coming guys :):)

Scott
08-21-2003, 08:58 AM
Originally posted by Tingle
Grrrrrrrr just what i want to hear!

thanks for the reply

I had to do this with Mine too Tingle, it's not to difficult to cut at all. A Dremel did the job fine for me :)

Didnt need to be that perfect and neat, as you never really see the motherboard tray much!