Asus P5N-E SLI and OCZ2N1066SR2GK

[aznsniper911]

Okay I know my motherboard is fine since I mixed OCZ2N1066SR2GK and some OCZ DDR2-1000 before for a combined total of 4GB but I recently pulled the DDR2-100 and put in a second kit of OCZ2N1066SR2GK so basically now I have 4x1GB of OCZ2N1066SR2GK but at 2.3V it is not stable even when I put it unlinked and 1000mhz! Have you guys gotten it to work on such boards?

[andyOCZ]

Hi, test each of the new sticks alone and see if they are all stable at rated speed and voltage. Then test the new kit alone to see if it works for you. Be sure you set 1t/2t to 2t timings when using 4 sticks. I had your board and it wasn't stable at 1t with 4 sticks.

Let us know how it goes, thanks.

[The0men]

May need slight NB voltage increase also. Running 4GB at 1000mhz is a fair ask. With slackened timings it should be easy with ~1.4v NB and 2.3v RAM.