best super pi times?

[Henry]

I use winxp sp1, fat32, dx. 9.0b, i have win2k in another partition, will try it tonight, must go to bed, it's 8.09am here now :eek: :D

[IamAnoobieCheez]

oh ic.. yea.. try win2k w/ ntfs file system. Both ntfs and sp2 was faster than fat32 & sp1 in my 3dmark benches.. haven't had chance to test it for other tests but.... im lazy~~ :D

sleep well :D

[Endre]

Server 2003 for SuperPI. :)

[dpa]

http://www.home.no/dpa/Ftp/Bilder/super%20pi%20res..%20nr1.JPG

Cooled by R404a Mach II

1.775v in bios

[Sir Random]

36s

http://www.handspun.utvinternet.com/daniel/pi36s.jpg

[SAE]

Originally posted by dpa
http://www.home.no/dpa/Ftp/Bilder/super%20pi%20res..%20nr1.JPG

Cooled by R404a Mach II

1.775v in bios

Why this low fsb???

Nice results anyway :thumbsup:

[TM30]

A64 3200+ C0 ,cooled with Thermaltake TR2-M6 with YS Tech Fan 3w
Gigabyte K8N Pro
Corsair 512MB XMS 3500 Rev.1.1

not bad, I think ;)
http://manner83.bei.t-online.de/bilder/pi.JPG

[SAE]

Hey TM30, my German fellow... :D

Welcome to the sickness. :toast:

[TM30]

Originally posted by SAE
Hey TM30, my German fellow... :D

Welcome to the sickness. :toast:

hehe yesterday i bought a prometeia mach 2 on ebay... lets see what this A64 can do ^^

by the way, i'm looking vor vmods for my Gigabyte K8N Pro ! Where can I find it ?

[dpa]

SAE: it stops there..

[SAE]

Originally posted by TM30
hehe yesterday i bought a prommeteia mach 2 on ebay... lets see what this A64 can do ^^

by the way, i'm looking vor vmods for my Gigabyte K8N Pro ! Where can I find it ?

Should be fun :D

Mods here:
http://www.xtremesystems.org/forums/showthread.php?s=&threadid=20190

[SAE]

Originally posted by dpa
SAE: it stops there..

Oh :eek:

Does your ram stop you or the cpu/boards combo? Thought there would be nice high fsbs (270+) with dual channel... :( =ultimate power ;) I am a FSB addict :thumbsup:

[Kamerat]

Grats dpa :)

My SuperPI back in February... (http://home.no.net/comerade/pc/superpi33-2.png)

[Mini]

How much does ram timings say in superpi???

I got a 3.0@3.8(253) 1:1 with ram@3-4-4-7 i do 37 secs...

Do ram say alot??? Was thinkin about getting some nice mushkin pc3500 level2 an hope they reach 253Mhz@low timings... What do you folk think??? Would it help... And could they even get up there???

[SAE]

Originally posted by Mini
How much does ram timings say in superpi???

I got a 3.0@3.8(253) 1:1 with ram@3-4-4-7 i do 37 secs...

Do ram say alot??? Was thinkin about getting some nice mushkin pc3500 level2 an hope they reach 253Mhz@low timings... What do you folk think??? Would it help... And could they even get up there???

Timings definately help... :D

I know it from my own experiences :)

[Endre]

Originally posted by SAE
/Edit

How cold was this air? ;)
Not that cold, 8-10C IIRC. I would have 2900 MHz if it was winter. :D

[SAE]

Originally posted by Endre
Not that cold, 8-10C IIRC. I would have 2900 MHz if it was winter. :D

Hehe. I knew it ;)

[CodeRed]

Here's my latest after removing the heat spreader

AN50R, 10/30 bios and win2k pro
http://users.tpg.com.au/spark69/an50r/superpi29sec.jpg

Really need to try that K8NHA Pro bios in this shuttle and some Win2003 Server tweaks to see if I can crack 28 sec.

A default install of win2003 server gave worse results :(

[SAE]

Originally posted by CodeRed
Here's my latest after removing the heat spreader

AN50R, 10/30 bios and win2k pro


I assume it's HTT/RAM 1:1, what timings did you use? What ram is it?

[SAE]

My latest :D

[bias_hjorth]

simply stunned... still the MACH II GT?

[SAE]

Originally posted by bias_hjorth
simply stunned... still the MACH II GT?

Yup :D

[bias_hjorth]

amezing CPU you got there.. very nice result ! :)

[EmineM]

very nice codered and SAE

what stepping do you have on your A64 chip CodeRed?

[CodeRed]

Originally posted by SAE
I assume it's HTT/RAM 1:1, what timings did you use? What ram is it?

Yeah the RAM is running 1:1 2-2-2-5 timings @ 3.6V, Kingston KHX3200/256

RAM aint maxed either, this stick will do 276 MHz @ 3.6V, but my CPU couldnt quite hit 11x276.

stepping is CAATC 0403 'Y'

[EmineM]

what comes after the week?
CAATC 0403YMPW?

[CodeRed]

Originally posted by EmineM
what comes after the week?
CAATC 0403YMPW?

TPMW IIRC, I'll check when I get home (at work ATM)

[EmineM]

thanks alot!!

[Endre]

Nice SAE. Can't wait 'til I get a Prommy. :)
(Probably a Mach I that I can get cheap, will be R404a modded.)

Wonder what my chip will do prommy cooled...

Codered: Nice result... Server 2003 need to be tweaked. There are a thread about Server 2003 little back in this section, there you will find a 2003 guide.

[SAE]

Originally posted by Endre
Nice SAE. Can't wait 'til I get a Prommy. :)
(Probably a Mach I that I can get cheap, will be R404a modded.)

Wonder what my chip will do prommy cooled...

Codered: Nice result... Server 2003 need to be tweaked. There are a thread about Server 2003 little back in this section, there you will find a 2003 guide.

Yes. I am anxious what scores you could get :D

But remember. The results I show are only to reproduce when ya fsb is as high as mine... FSB RULEZ :cool:

[Endre]

Originally posted by SAE
Yes. I am anxious what scores you could get :D

But remember. The results I show are only to reproduce when ya fsb is as high as mine... FSB RULEZ :cool:
Sure.... but that will be hard with an NF7. :D

My current is dead. It wouldn't go higher than 249.6(x11) 2-2-2-11 CPU-int/APIC on anyway (stock cooler...), so I was getting tired of it. Hoping for a new one that does at least 253-255 without too much hesitation. :D

But 12.5x250 or 251 should probably be enough for 32s...

[TM30]

no better times since last try, but now with a nice HTT (and HT-Link @700mhz)

http://manner83.bei.t-online.de/bilder/pi2.JPG

[SAE]

Originally posted by Endre
Sure.... but that will be hard with an NF7. :D

My current is dead. It wouldn't go higher than 249.6(x11) 2-2-2-11 CPU-int/APIC on anyway (stock cooler...), so I was getting tired of it. Hoping for a new one that does at least 253-255 without too much hesitation. :D

But 12.5x250 or 251 should probably be enough for 32s...

Yeah, the nf7 and apic sucked too, like the dfis. Seems to be the nf2 chipset/cpus limiting us.

Do you think you could do 3.125Ghz with onnly a mach1 ;) ?

I had evap temps around only -23°C at 2.85GHz and 2V, and cpu socket temps were over 24°C! I now have loaded socket temps of 18°C and evap at -52°C :D (12x255 priming, primed over the last night and still priming... :thumbsup: )

/edit.
@TM30

If your ram would be faster you could probably gain a second or two ;)

[Endre]

Originally posted by SAE
Yeah, the nf7 and apic sucked too, like the dfis. Seems to be the nf2 chipset/cpus limiting us.

Do you think you could do 3.125Ghz with onnly a mach1 ;) ?

I had evap temps around only -23°C at 2.85GHz and 2V, and cpu socket temps were over 24°C! I now have loaded socket temps of 18°C and evap at -52°C :D (12x255 priming, primed over the last night and still priming... :thumbsup: )
The unit will be R404a (maybe R507) modded "of course". The CPU does 2800+ at 45-50C and my crappy low +12v line... we'll see what it will do with some nice temps and a decent PSU. :D

I'm pretty sure the chip will do at least 3,1 GHz with R404a Mach I.

Edit: Hm... I see umakemi's AQYHA did 3100 MHz with modded Prommy Mach I... only 2550 with air.

[SAE]

Originally posted by Endre
The unit will be R404a (maybe R507) modded "of course". The CPU does 2800+ at 45-50C and my crappy low +12v line... we'll see what it will do with some nice temps and a decent PSU. :D

I'm pretty sure the chip will do at least 3,1 GHz with R404a Mach I.

Edit: Hm... I see umakemi's AQYHA did 3100 MHz with modded Prommy (R404a Mach II?)... only 2550 with air.

Some chips perform well under phasechange, some don't... :shrug:

I have an old 2400+ tbred b that does 2.4+ on air and 2.6 under phasechange only... so go figure.

And the 12V line does not much to the cpu. Going from 12.4V to 13V just brings more instability... Take a look after a good 5V line though. But I dunno if the nf7 uses the 12V rail more intensely than the dfi's do... And remember, it also depends on the board you're on... abits seems to get a bit higher cpu clocks but don't like high fsb the same time...

[Endre]

A thing I've noticed with this CPU is that it seems to care a lot about the temp, compared to a few other desktop XPs I've used. How it does with zubzero temps is another story though, but I have a feeling that it will do goood...

With NF7 the 5v line is not important at all... 12v is. It drops badly with 1,9v vcore and more, and I'm pretty sure it hurts my OC, at least a few MHz.

And the high CPU/FSB/vcore problems seems to be non-existent with the newer boards and bioses. :)

[SAE]

Originally posted by Endre
A thing I've noticed with this CPU is that it seems to care a lot about the temp, compared to a few other desktop XPs I've used. How it does with zubzero temps is another story though, but I have a feeling that it will do goood...

With NF7 the 5v line is not important at all... 12v is. It drops badly with 1,9v vcore and more, and I'm pretty sure it hurts my OC, at least a few MHz.

Okay. I could only guess as my last nf7-s oc adventure was quite some time ago...

Originally posted by Endre
And the high CPU/FSB/vcore problems seems to be non-existent with the newer boards and bioses. :)

Erm... do ya really think so??? Hehe. Iirc, there are many probs with newer boards just to reach fsbs higher than 225!!!

Why I don't see scores like mine from all the mobile/nf7 users? All I have seen up to now were at 200-215MHz fsb to pass 3GHz :confused:

[Endre]

Originally posted by SAE
Erm... do ya really think so??? Hehe. Iirc, there are many probs with newer boards just to reach fsbs higher than 225!!!
I know it. :)
The max 225 boards are history now, thankfully. The latest boards are great. My first NF7 (really old) did 245-250 with multis below 11, but only 230x11... unmodded, vdd mod didn't help. With Tictac D10 bios.

My third (NB 0344) did 249x11... and 249x10... probably 249x8 aswell (maybe 250 :D ). With Tictac D2x bioses.

Why I don't see scores like mine from all the mobile/nf7 users? All I have seen up to now were at 200-215MHz fsb to pass 3GHz :confused:
Because people have the old crappy NF7s, they either keep that or get DFI boards.

But, there are some, Dani with 253x12 or something like that for example... ;)

Edit: That's with a desktop, but there is no such thing as NF7/mobile high FSB problems...

And soon, you have me with 25Xx12,5 :D

[SAE]

Originally posted by Endre
Edit: That's with a desktop, but there is no such thing as NF7/mobile high FSB problems...

And soon, you have me with 25Xx12,5 :D

TheDude, Keeper, Jeff, all have probs at 3GHz+ and fsb higher than 215...

[Endre]

Originally posted by SAE
TheDude, Keeper, Jeff, all have probs at 3GHz+ and fsb higher than 215... ...with old boards.

Well. We'll see when I get my prommy. :)

[SAE]

Originally posted by Endre
...with old boards.

OPP bought a new one one or two months ago, too. Could not get it higher than 238 stably!

Yeah. But like you said. We'll see, hehe ;)

[SAE]

results updated:

[CodeRed]

finally a 28 sec score using an AN50R and win2k :banana:

http://users.tpg.com.au/spark69/an50r/superpi28sec.jpg

[Endre]

Very nice! That's 1:1 2-2-2-5?

[CodeRed]

Originally posted by Endre
Very nice! That's 1:1 2-2-2-5?

actually

2.0-8-12-2-2-5-2-2-1-1 @ 3.6V 1:1

using K8NHA Pro bios (0319)


man thats just too many numbers to remember :p:

[Tom Holck]

Finaly.

24 sek fastest timings 3353 Mhz:banana:

[EmineM]

24s is not enough! :p
Just kidding, I wish you luck in getting 23 seconds and making a new world record.

[Learn]

just :toast: Tom Holck

[IvanAndreevich]

Tom Holck
VMOD the board to get close to 300 FSB maybe?

[K32A]

Very nice Tom... :slobber:

[zytrahus]

Originally posted by saaya
isnt there a page with the highscores?

I made this page : http://zytrahus.free.fr/

there is a page in japanese too... but don't understand everything...


:toast:

[zytrahus]

Originally posted by Learn
just :toast: Tom Holck ;) :hello:

[Tom Holck]

Originally posted by zytrahus
I made this page : http://zytrahus.free.fr/

there is a page in japanese too... but don't understand everything...


:toast:

I'm in ;)

[zytrahus]

you're welcome:toast:

[Endre]

Sick time Tom. Number 1 AMD and number 1 non-LN2. Add your time here (http://www16.big.or.jp/~bunnywk/cgi-bin/superpi.cgi) too, and let the japs see what danish cascade-power can do. :)

[SAE]

Originally posted by zytrahus
you're welcome:toast:

Hey pal. Wanted to enter the list too. I got 32s with my mobile XP at 3107MHz, have a look:

http://www.xtremesystems.org/forums/showthread.php?postid=450532#post450532

But I did not find any possibility for verification... or to register.

SAE

[Learn]

Originally posted by zytrahus
;) :hello:

hi, zytrahus

Originally posted by SAE
Hey pal. Wanted to enter the list too. I got 32s with my mobile XP at 3107MHz, have a look:

http://www.xtremesystems.org/forums/showthread.php?postid=450532#post450532

But I did not find any possibility for verification... or to register.

SAE

that ?
http://zytrahus.free.fr/saisie.php

[zytrahus]

his entry is OK

[SAE]

Originally posted by Learn
that ?
http://zytrahus.free.fr/saisie.php

Erm. I filled the form :D

I only meant, there's no question for a screenie or sth like that... you know :)


@zytrahus

Thanks, pal :thumbsup:

[Evil_Spork]

yall cant beat my 128k score... 0s baby. oh yeah. fear me.

[Tom Holck]

Originally posted by Endre
Sick time Tom. Number 1 AMD and number 1 non-LN2. Add your time here (http://www16.big.or.jp/~bunnywk/cgi-bin/superpi.cgi) too, and let the japs see what danish cascade-power can do. :)

Done

:toast:

[Endre]

Hm,

did you forget the screenshot? With that time I think you should include it. :D

24 minutes, LOL :D

[GomerPyle]

Finally reached the 30 sek. :)

http://www.overclocking.dk/img/users/23219_07.jpg

[EmineM]

nice, what timings, what Mobo? What cooling?
What temps do you have using MBM5 or anything.
Btw is that Win2003 oder WIN2000?

[zytrahus]

I've just max screen my A64 3000+ @3071MHz with R404a direct on die

:

http://www.cooling-masters.com/forum/index.php?showtopic=976


I'm going to bench super pi next time but my BH5 isn't really excellent...




[ EUROPE & US ] SUPER PI DATABASE : http://zytrahus.free.fr/

[EmineM]

I have a question for the tweakers, do you have to order Win2003 Server Eval Copy or can you download it? I was at microsoft site but they want me to order it so they can send it to me for 0 Bucks, cant I just download it?

[Malves]

Here's mine...

[SAE]

Originally posted by Malves
Here's mine...

Nice clocks malves. :D

But cpc off is killing your performance :(

I get near 32s at that speed ... (get 32s at 258x12 ;) )

[SAE]

Originally posted by µnrealneo²
eww, hadn't noticed that.

CPC off = :stick:

Btw, that DFI board I had would only do 235 in 3D without bombing out.:rolleyes: Died 2 weeks after I got it. (Jan):mad:

Been an NF7 man since, can run 250 in SC with no VDIMM mod & KVR 2700 BH-6.:D

Yeah. It (CPC) cuts off 1 second... :(

[GomerPyle]

Eminem: Cpu is cooled with Mach2/r404a and display says -58 idle and -52 load. MBM5 says -36 idle and -32 load. Board is a Asus p4c800 with vdimm and vdroop mod. Memory is 1GB bh-5 at 5:4 which is around 430mhz cas 2225. Is working on 265 1:1 cas 2225 with 2 x 256mb bh-5 (all KHX).

[Tom Holck]

Originally posted by EmineM
I have a question for the tweakers, do you have to order Win2003 Server Eval Copy or can you download it? I was at microsoft site but they want me to order it so they can send it to me for 0 Bucks, cant I just download it?

When you order, microsoft send you a mail.
in the mail there is a link and password.
Then you download an image file.
The image have to be burned to a boot cd.

You can do that for:

win 2003 server 32 bit
win xp 64 bit
win 2003 server 64 bit

:toast:

[Malves]

Originally posted by SAE
Nice clocks malves. :D

But cpc off is killing your performance :(

I get near 32s at that speed ... (get 32s at 258x12 ;) )

Well, my double sided KHX refuses to run anything with CPC on at any speed. :(

I got it to run once with cpc on at 2.9 ghz and got 35s. Strangely, I've got 35s before @ 2.9ghz and CPC off. Does APIC disabled make any difference? I had that disabled when benching @ that speed.

[SAE]

Originally posted by Malves
Well, my double sided KHX refuses to run anything with CPC on at any speed. :(

I got it to run once with cpc on at 2.9 ghz and got 35s. Strangely, I've got 35s before @ 2.9ghz and CPC off. Does APIC disabled make any difference? I had that disabled when benching @ that speed.

Hmm. I don't think APIC makes out a difference there... hmm. Only in 3d benching you would notice the differences (or in hdd benches, apic off should help here)...

CPC off is what hits your performance. Erm, what bios did you use when benching with cpc on this one time?

[Malves]

used 1/31. there's no way i can run anything with cpc on, unfortunately. :( Not even the new 4/29 helped me.:(

[rastavid]

a nice 3.0E :banana:

http://rastavid.free.fr/images/screens%203e/superpi1m.JPG

[zyx]

:)

[zytrahus]

It 'd be fine if members could fill the form for the Super PI database ;)

http://zytrahus.free.fr/

[EmineM]

Still have to mod to be able to run 1:1 hehe :) Hoping to see 29secs

[cpulloverclock]

Originally posted by EmineM
Still have to mod to be able to run 1:1 hehe :) Hoping to see 29secs yes 16*265 1:1 gives 29s

very nice :toast:

[EmineM]

thanks :) I only got after this tuning now, somewhere deep in this thread I have my 30 seconds on my A64, if I would have installed WinServer back then I couldve also gotten 29seconds :)

cpulloverclock, have you found a way to remove the Biostar bios from the shuttle yet?

tomorrow I will mod my abit :)

[cpulloverclock]

Originally posted by EmineM
thanks :) I only got after this tuning now, somewhere deep in this thread I have my 30 seconds on my A64, if I would have installed WinServer back then I couldve also gotten 29seconds :)

cpulloverclock, have you found a way to remove the Biostar bios from the shuttle yet?

tomorrow I will mod my abit :) awdflash ***.bin shuttle bios /f ?

[CodeRed]

Originally posted by cpulloverclock
awdflash ***.bin shuttle bios /f ?

Nope, that doesnt work for the Biostar BIOS in the AN50R.
Even the /nbl stuff doesnt help.

This BIOS implements a Write Protect which prevents further BIOS updates unless you use the in-BIOS update menu.

Only way I found was to replace the BIOS chip :( ended up hot flashing an A7N8X motherboard with the shuttle BIOS then swapping bios chips.

[cpulloverclock]

Originally posted by CodeRed
Nope, that doesnt work for the Biostar BIOS in the AN50R.
Even the /nbl stuff doesnt help.

This BIOS implements a Write Protect which prevents further BIOS updates unless you use the in-BIOS update menu.

Only way I found was to replace the BIOS chip :( ended up hot flashing an A7N8X motherboard with the shuttle BIOS then swapping bios chips. ok
I just use a Biostar eeprom

[CodeRed]

Originally posted by cpulloverclock
ok
I just use a Biostar eeprom

Yeah, thats the best way. I now keep a Shuttle BIOS eeprom and a Biostar BIOS eeprom.

The Biostar BIOS doesnt seem to initialise the volt regulators correctly (especially the Vldt regulator) so the way I do it is:

1. boot with shuttle bios and set up voltages
2. save settings and reboot
3. hot swap to biostar bios & reboot
4. configure memory timings with biostar bios (dont touch the voltage settings)
5. save settings and reboot into windoze

the voltages set in the first step will then be retained.


EDIT: A BIOS Saviour would make this easier :)

[megatron]

SuperPi at 24/7 settings. (http://www.doomiii.pwp.blueyonder.co.uk/I429-spcEvilous(superPi).JPG) :toast:

This is with cpc on, 13/15 alpha timings 1333334. DFI infinity, xp-m.

[aristidis]

:D Here is mine too..

[fxr91]

Best I can do with my Mushkin LVL2 1:1 @ 3.3 vdimm :( Even with more volts or lower multi, it doesn't want to go further :stick:

[macci]

8M record @ 5454MHz by Vigor:

http://v-tec.hp.infoseek.co.jp/L411A842/838-5454_51-1733V-265S.jpg

That just hurts my eyes :D

[aristidis]

:D :D :D Bud CPU' s those Prescott' s :D

[cpulloverclock]

Originally posted by macci
8M record @ 5454MHz by Vigor:

http://v-tec.hp.infoseek.co.jp/L411A842/838-5454_51-1733V-265S.jpg

That just hurts my eyes :D already posted :D but I like to see it again

[KoGeR|Max]

SAE and other with DFi board :slobber:

My NF7-S rev 2.0 cant not go over 230 so far :rolleyes:

But i got 34 sec.

http://www.mainboard.dk/upload/files/moo.JPG

I get 34 @ 218 FSB too.....
My cpu max out at 3240 MHz :/

[SAE]

Nice one anyway :)

I would love to get my cpu to its max, if only the board would not limit me... I am quite sure I would get it to 3.2GHz at least with 255fsb or so...

I cannot knack the 31s now because of that, but I am quite nearby...

I'll have to try on.

[EmineM]

SAE Get win2003 serve r :) and you have what you want :p

[SAE]

Originally posted by EmineM
SAE Get win2003 serve r :) and you have what you want :p

Do you really think the 32bit server could get me the second? :confused:

Hmm. I doubt it, but maybe the higher bench values (4M to 32m) would gain some seconds...

[Malves]

My 2400-M maxed out @ 3.1ghz @ 2v. I didn't have vsense at the time because my board used to do 2.2v without it.
I think they put some life in these DFI. They do whatever they want, whenever they feel like.:D

[EmineM]

The Win2003 Server Evaluation Copy slightly modified to workstation ( 32 bit copy ) Gave me a 1 second improvement.
I had 31 seconds running my P4 EE @ 4.25 GHZ 5/4 and afterwards I had 30 seconds.
Yes it gave me a nice push so I assume it is worth a try.

[Malves]

Evaluation Copy? Where?:)

[EmineM]

https://microsoft.order-5.com/windowsserver2003evaldl/

First one :)

[SAE]

Hehe. Thanks. I'll try it then :)

[cpulloverclock]

when I said that win2k3 was better... :)
:banana:

http://membres.lycos.fr/cpulloverclock79/1184.JPG

[Malves]

Tried the thing last nite. Ran Superpi 1M on water @ 257x10.5 just like I did sometime ago, and got the same 37s. So, Win2k3 didn't shove the second for me.
Good thing, thou, I was able to run CPC on, and @ 255x10.5, it gave me 36s.
Could someone here point me to where to buy win server 2k3 standard edition? The link for the evaluation copy gave me only for the enterprise edition option.

[SAE]

Originally posted by Malves
Tried the thing last nite. Ran Superpi 1M on water @ 257x10.5 just like I did sometime ago, and got the same 37s. So, Win2k3 didn't shove the second for me.
Good thing, thou, I was able to run CPC on, and @ 255x10.5, it gave me 36s.
Could someone here point me to where to buy win server 2k3 standard edition? The link for the evaluation copy gave me only for the enterprise edition option.

Wow. Malves, here's your missing second :D

But how did ya get it working???

[Malves]

When I enable CPC, the system boots up fine...always. Things get ugly when going into WinXP, where I get BSOD right after the opening screen. But I had no problems with Win2k3. It wasn't stable, but I had it running.
Maybe CPC with DS ram could be a win issue?? don't even wanna think about it.:rolleyes:


I might put on the r404 and see if I can lower the time to 33s @ 3ghz...If the board feels like giving me 3ghz today.:rolleyes:

[SAE]

Originally posted by Malves
When I enable CPC, the system boots up fine...always. Things get ugly when going into WinXP, where I get BSOD right after the opening screen. But I had no problems with Win2k3. It wasn't stable, but I had it running.
Maybe CPC with DS ram could be a win issue?? don't even wanna think about it.:rolleyes:


I might put on the r404 and see if I can lower the time to 33s @ 3ghz...If the board feels like giving me 3ghz today.:rolleyes:

Good luck with your pickypicky DFI :D (mine's one too)

[EmineM]

Ah sorry Malves I forgot something. I hope you still have it somewhere installed.
http://www.msfn.org/win2k3/

you need to follow that guide. Took me 5 minutes. I didnt do the DirectX and sound guide tho since I just installed the Evaluation Copy for Super pi.
It disables some Memory Bandwidth sucking server applications. Which might gain you another second :)

The Enterprise Win 2003 32 Bit Copy is the Evaluation one because if you boot up under it in the right corner it says Evaluation Copy. If I am not wrong :)
Anyway Happy Super pi benching :)

[gabbax]

http://w1.825.telia.com/~u82509108/DFI2561till136sec.jpg

[Malves]

Nice o/c. You should be getting 35s or less @ that speed. I got 36s @ 255x10.5.

[Try-this]

Originally posted by Malves
Nice o/c. You should be getting 35s or less @ that speed. I got 36s @ 255x10.5.

yea something is wrong, I'm getting 36 sec at 250*10,5, his ought to be 2 seconds better then mine at least...

[SAE]

Originally posted by Try-this
yea something is wrong, I'm getting 36 sec at 250*10,5, his ought to be 2 seconds better then mine at least...

I agree, but not "at least" 2sec.... ;)

He could get 34s max at that speed with an XP.

gabbax, do you have cpc disabled? Maybe win installation is crappy...

[Endre]

It's a Tbred, not a Barton...

[SAE]

Originally posted by Endre
It's a Tbred, not a Barton...

Whooops :p:

CPC enabled/disabled anyway? Could be a second faster maybe... with it enabled... jeeze, maybe I am wrong ;)

[bias_hjorth]

nahh think you´re right :) should be around a second faster.. maybe even 2 with fully tweaked win2k :)

[Endre]

2 secs? No way... but it should be close to 35.

[Malves]

Originally posted by Endre
It's a Tbred, not a Barton...

Yup, didn't see that. with CPC off i think that's about right then.:)

[gabbax]

Endre is right...dont think2secs...35is possible,this runs are just test runs.Idont know a j-s**t about BIOS yet,illookintoit this week end:D

[SAE]

Originally posted by gabbax
Endre is right...dont think2secs...35is possible,this runs are just test runs.Idont know a j-s**t about BIOS yet,illookintoit this week end:D

You'll get better, I know :D

[megatron]

Originally posted by EmineM
Ah sorry Malves I forgot something. I hope you still have it somewhere installed.
http://www.msfn.org/win2k3/

you need to follow that guide. Took me 5 minutes. I didnt do the DirectX and sound guide tho since I just installed the Evaluation Copy for Super pi.
It disables some Memory Bandwidth sucking server applications. Which might gain you another second :)

The Enterprise Win 2003 32 Bit Copy is the Evaluation one because if you boot up under it in the right corner it says Evaluation Copy. If I am not wrong :)
Anyway Happy Super pi benching :)
I tried this. Installed fine, then load the drivers and sound, ati control panel didn't work. :/

Damn - didn't read what u said. I was at rage3d and someone was saying the same thing, doh!

[gabbax]

Originally posted by SAE
You'll get better, I know :D yepp u propably right about that:D 2600+XP-m arrives from excaliberpc.com neext week i hope,and il pick up the 2500+XP-m this fri:)

[SAE]

Originally posted by gabbax
yepp u propably right about that:D 2600+XP-m arrives from excaliberpc.com neext week i hope,and il pick up the 2500+XP-m this fri:)

Gluck, hehe :)

[Pejsen]

My time ;)

Any tips to get it lower?

This proccy does not like high fsb's :confused:

[bias_hjorth]

a tad to slow the overall speed considered...... you ´should be at 31 ~ 30sec..

[zytrahus]

http://zytrahus.free.fr for the US/Europe SuperPI 1M database :)

give it on your own forums in your countries

I will add soon new parameters...

[Pejsen]

Should i be lower in time?

This is a fresh install of WinXP PRO

[SAE]

Originally posted by Pejsen
Should i be lower in time?

This is a fresh install of WinXP PRO

Hehe. I got that with 258fsb and 3.1GHz with my AXP (only 140MHz more...) :D

You should be able to get better results.

P.S. Timings can speed it up too... maybe you could try to set Bank cycle time to 9 or even 7, and RAS to CAS cannot be set faster? CH-5?

/edit

Okay I just saw you are running a 512kb cache one... maybe it's fine then. :)

[Pejsen]

Originally posted by SAE
Hehe. I got that with 258fsb and 3.1GHz with my AXP (only 140MHz more...) :D

You should be able to get better results.

P.S. Timings can speed it up too... maybe you could try to set Bank cycle time to 9 or even 7, and RAS to CAS cannot be set faster? CH-5?

/edit

Okay I just saw you are running a 512kb cache one... maybe it's fine then. :)

Yeah your scores are just GREAT! :D

I hope my time is what you can expect from a newcastle chip.. because if its not i have no idea what is slowing me down.

[bias_hjorth]

you should be around 31-30... what bios and mobo are you on`?

[SAE]

Originally posted by bias_hjorth
you should be around 31-30... what bios and mobo are you on`?

Sure??? He's on a newcastle!

[bias_hjorth]

yes 100% with claw it takes 31 at only 2740 (cpu12).. :)

[SAE]

Originally posted by bias_hjorth
yes 100% with claw it takes 31 at only 2740 (cpu12).. :)

Hmm. Maybe you can help him with some tips... I never had an A64 im my hands/in reach... so I know nothing... but I know timings help. And win2k3 server/workstation should also help a lil...

[bias_hjorth]

well i´ll bet you´ll come after it :)
offered my help in above post by asking some question... ups yes win2k3 helps a tad also :)

[hipro5]

Yeap......Here's one of mine......My "other" one will be posted as soon as I'll post to my local forum(here in Hellas) first, coz there are a lot of "spies" in here from us....... :D :toast:

[bias_hjorth]

Originally posted by hipro5
Yeap......Here's one of mine......My "other" one will be posted as soon as I'll post to my lockal forum(here in Hellas) first coz there are a lot of "spies" in here from us....... :D :toast:


very nice EE.. damn fast -- g8 to see you back :)

[SAE]

Originally posted by hipro5
Yeap......Here's one of mine......My "other" one will be posted as soon as I'll post to my lockal forum(here in Hellas) first coz there are a lot of "spies" in here from us....... :D :toast:

Wow. What a bench :slobber: :thumbsup:

[aoc007]

Originally posted by µnrealneo²
Is that a 3.4 E or EE ?

Great time anyways. :cool:

Must be a EE with BH5 or EB to back it up. Nice run.

[Tom Holck]

Originally posted by hipro5
Yeap......Here's one of mine......My "other" one will be posted as soon as I'll post to my lockal forum(here in Hellas) first coz there are a lot of "spies" in here from us....... :D :toast:

Nice results hipro5

Nice your back here in XS:toast:

[shidokanjohn]

Originally posted by aoc007
Must be a EE with BH5 or EB to back it up. Nice run.

Kingston value ram pc 2700 Bh-6:)

[swarzy85]

Hi :)
This is my personal record :)

http://www.tombraiders.it/public/3990super.JPG

However this is my highest score:
http://www.tombraiders.it/public/4100super.JPG

My prescott isn't so lucky :(
he doesn't start with more than 1.585 volt

Prescott 2800E (bus 800Mhz) @ 4100Mhz with 1.585v cooled by Prometeia Mach 2
Asus P4C800 Gold rev 2.00
Corsair 2x256mb PC3200 LL 2-2-2-6 with 2.85v (3:2 @ 293Mhz and 5:4 @ 285Mhz)

[hipro5]

Originally posted by bias_hjorth
very nice EE.. damn fast -- g8 to see you back :)

Thanks M8 ...nice to be back with you..... :D :toast:

[hipro5]

Originally posted by Tom Holck
Nice results hipro5

Nice your back here in XS:toast:

It's nice to be here with you "max topers" my friend.....

I'm happy to see you're doing GREAT my friend Tom.....KEEP ON....... :D :toast:

[hipro5]

They are 2 x 256MB Kingston Value Rams PC2700(DDR333) with BH-6 chips on board....

[CodeRed]

Hipro5, nice to see you back :toast:

Can you do a pifast with that CPU/mem combination

[hipro5]

Originally posted by CodeRed
Hipro5, nice to see you back :toast:

Can you do a pifast with that CPU/mem combination

Nice to be back M8...... :toast:

I'll give it a try.... ;)

[Djake]

My Superpi. Not so impressive.. Need som tweaks, and better cooling.

http://www.thefatman.dk/upload/files/superpi.JPG

[EmineM]

How much vdimm do you give your PC2700 Values? I also have some BH6 valueram here from kingston :)

[swarzy85]

Originally posted by Djake
My Superpi. Not so impressive.. Need som tweaks, and better cooling.

http://www.thefatman.dk/upload/files/superpi.JPG
what's your cooling system?
very good ;)

[Djake]

Originally posted by swarzy85
what's your cooling system?
very good ;)

Thx ;)

Its a Mach1 R404a.

[K32A]

Cool - The NF3 250Gb is 2 seconds faster at stockspeed than NF3 150 :)

Now i just have to get some mods on my mobo, because 1.55vcore and 2.85 vdimm is not enough :P:

[bias_hjorth]

where did you get this info?

[EmineM]

I dont know I am having some serious troubles with my Asus p4c800, I got it to replace my Abit ic7 g and I just cant hit my 4,25 ghz anymore. I am sure that my Ram isnt limited me neither my cooling because I didnt change it!
I was a expecting a 10-30 mhz performance drop or gain but not 250 mhz!!!

[hipro5]

Originally posted by EmineM
How much vdimm do you give your PC2700 Values? I also have some BH6 valueram here from kingston :)

I feed them 3.56Vmem at their max frequency....

[Burner Man]

Originally posted by K32A
Cool - The NF3 250Gb is 2 seconds faster at stockspeed than NF3 150 :)
are you sure?

[hipro5]

Originally posted by CodeRed
Can you do a pifast with that CPU/mem combination

It's 42.96sec at 4444MHz.....

[CodeRed]

Originally posted by hipro5
It's 42.96sec at 4444MHz.....

Cool, thanks

[K32A]

Originally posted by bias_hjorth
where did you get this info?

If you are asking me, then i got it from my own experience ;)

[bias_hjorth]

could you show some results?.. 2sec sounds a tad too much that is..

[K32A]

Originally posted by bias_hjorth
could you show some results?.. 2sec sounds a tad too much that is..

With my Shuttle AN50R w. NF3 150 chipset and my A64 3200+ at stockspeed (2000MHz) it took 47 seconds at 1M...

And at stockspeed with my Soltek Barebone w. NF3 250Gb it tkes me 45 seconds ;)

[bias_hjorth]

dont think its the CPU there m8....

47sec stock is WAAY to slow..
nf150 + gigabyte + a64 3200 = 42sec stock here.. I think it should be around the same on the nf250 maybe a tad faster (1sec..)
:)

[K32A]

Hmm, okay - When i ran the 1M with my 250Gb all the background programs were'nt closed, sooo - i dont know

[cpulloverclock]

Originally posted by bias_hjorth
could you show some results?.. 2sec sounds a tad too much that is.. look at this link http://219.113.251.125/c-board/c-board.cgi?cmd=ntr;tree=2598;id=

[bias_hjorth]

yes exactly my point :) allmost the same..

[TM30]

:banana: finally 34s @1M :banana:

MSI K8N Neo Platinum (vcore w/o mods up to 1,8V :D )
Nforce 3 250GB rulezz

http://manner83.bei.t-online.de/bilder/benchmarks/pi3-09-06-04.gif

[ZEROKOOL]

no overclocking on this test.:YIPPIE:

[ZEROKOOL]

it didnt atach my pic:( 44 sec:(

[StrongBadia]

http://img78.photobucket.com/albums/v299/StrongBad18/4100mhz.jpg

[bias_hjorth]

Originally posted by ZEROKOOL
it didnt atach my pic:( 44 sec:(


you need at least ten posts to make attachments

[The Stilt]

Something little:

http://mbnet.fi/elixir/3.2E/SPI-29.PNG
http://mbnet.fi/elixir/3.2E/5.19.PNG

Its few seconds too slow, because the board wont boot if GAT is set to any other setting than Auto. Also CPU NB Strap must be set to 800FSB, which is darn slow :(

4.6GHz / 1.6V prescotts heat dissipation is just too much, to R404 Mach2. Compressor is popping and squirling, when I put some load on it. Next I will try some DI for the cpu, and the board definately needs some soldering job :D

[EmineM]

what should CPU NB Strap be set to for good super pi scores?

[The Stilt]

533FSB would be the best, but it aint gonna happen with high fsb.
667FSB is also faster than 800FSB, but its also fsb limited :(

[Djake]

Originally posted by The Stilt
533FSB would be the best, but it aint gonna happen with high fsb.
667FSB is also faster than 800FSB, but its also fsb limited :(

why? and with all intels?

[WesM63]

Just playing around ;)

http://www.xtremeresources.com/forums/attachment.php?attachmentid=11085

I definatly need some new ram thou. This XMS C2 Pro Pc-3200 just isn't cutting it. No matter what I do it won't run past 220FSB.

[TM30]

Originally posted by WesM63
Just playing around ;)



I definatly need some new ram thou. This XMS C2 Pro Pc-3200 just isn't cutting it. No matter what I do it won't run past 220FSB.

try OCZ Platinum EB ! I get 256Mhz with my 3500 @ only 2,85V

[aoc007]

With the specs in my sig I get 37 seconds in 1M, too lazy to go redo it for a screenie :D Hopefully I can save enough money for a LS but first Id like a X800XT, and I need volt mods, but this is my main rig I dont want to be without it for very long.

[Sidewinder]

Your owned... your just owned by a computer from school...

http://www.side-radio.de/side/SUPPI.JPG

Crashs while startin Adobe Acrobat...

[WiruZDK]

just did this one... it can do more but need some other ocz EB :P

http://www.mainboard.dk/upload/files/fdasfasdfasdf.JPG

[EmineM]

Nice Wiruz, how many volts are you giving your ram?

[WiruZDK]

Originally posted by EmineM
Nice Wiruz, how many volts are you giving your ram?

they get 3.1v !

[EmineM]

nice :) again :p
I was able to hit 30secs 5:4 with my EE, try Win2003 Server

[WiruZDK]

Originally posted by EmineM
nice :) again :p
I was able to hit 30secs 5:4 with my EE, try Win2003 Server

i think 30 would be no prob.... i am just waiting for my ic7-g because my asus is very unstable with my mach2 after a month it is restarting all the time.... so something is wrong with it !

[[krook]]

http://upl.silentwhisper.net/uplfolders/upload5/37s.jpg

[Nikita]

New 1M world record 23s from memesama :slobber:

http://members.jcom.home.ne.jp/3233730401/23s.jpg

[The Stilt]

Can anyone match this (clock to clock) with prescott?

http://mbnet.fi/elixir/3.2E/5.11.PNG

:D

[charlie]

Asus A8V/FX-53

Not bad considering 5:3 divider (KHX3000 not compatible with A8V)

[CodeRed]

Originally posted by charlie
Asus A8V/FX-53

Not bad considering 5:3 divider (KHX3000 not compatible with A8V)

Nice considering the memory clocks.

It would be 27 sec with the mem 1:1 :)

[Goophy]

Well, i've got to start somewhere so i'll just post my best superpi 1M time...

http://home.no.net/mralien/superpi45.jpg

Locked mp sucks bigtime, aircooling to.
Should be better when I get my DFI NFII board and some serious watercooling...

[cold_ice]

@The Stilt: What cooling do you use?

[RootX]

And 29 from me, :)

[centaur]

it's my first look on my new mobile. he runs just 20minutes (no, he is not dead :P )

[aoc007]

Originally posted by cold_ice
@The Stilt: What cooling do you use?

Yeah whats the cooling Stilt? And do you have a 1M? btw nice oc :toast:

[Sidewinder]

Thats interesting... Nobodys laughting on my SuperPi bench :)

[SAE]

Originally posted by Sidewinder
Thats interesting... Nobodys laughting on my SuperPi bench :)

Why? We aren't here to laugh at other's efforts... :)

[Jasonxxx]

Mine..
http://www.ccountry.net/~jasonx521/3%20copy.jpg

[dcpusher]

Sorry I don't have a screenie, but i can do 46s with my AMD 2800 Baraton at about 2350, but isn't 1005 stable. Now I'm runing a 200fsb to get 2300mhz. I get about 48s for super pi. All this on stock cooling and 100% stable. Working on puting a new hatsink on my computer, should get another couple of hundred mhz out of it.

[cpulloverclock]

difference between superpi in english and superpi in japanese

http://homepage1.nifty.com/kubokubo/motherboard/k8nsnxp-939/k8nsnxp-939.html

[SAE]

Originally posted by cpulloverclock
difference between superpi in english and superpi in japanese

http://homepage1.nifty.com/kubokubo/motherboard/k8nsnxp-939/k8nsnxp-939.html

:lol:

The japanese one is slower cause the rig has to render all the complicated signs additionally ;)

[bias_hjorth]

lol that should be the case.. :D

[Learn]

Originally posted by SAE
:lol:

The japanese one is slower cause the rig has to render all the complicated signs additionally ;)



a bit slower with northwood too

[RootX]

And finally 28 secs, after killing the majority of win services, :)

[ultron5]

Finaly got 30s out of my 2.8E ! :cool:

http://mitglied.lycos.de/coolinglimit/Hardwarepics/SL79K/4434_30s.png

29s I'm coming! :D

[The Stilt]

Originally posted by aoc007
Yeah whats the cooling Stilt? And do you have a 1M? btw nice oc :toast:

Im currently using R404 modded Mach2 :D
Havent tried 1M for a while, but it takes ~4500MHz to get 29secs.
28sec would take something like ~4.7GHz+

Thanks m8 :toast:

[juanblanco]

one of my opteron 246 cg's, doing some testing before ordering an iwill dk8n nf3-250gb board :]

[EmineM]

very nice RootX, try Win2003 :). And.... is that 265 1:1 ? what timings?

[hipro5]

Here I am again........ :D

Miss me???..... :D

No??? :(

OK.......

27sec for now...... :D

[EmineM]

yes missed you :P omg thats nice Hipro what Windows are you using?
What are your GAT settings and what windows tweaks are you using?

[hipro5]

Originally posted by EmineM
yes missed you :P omg thats nice Hipro what Windows are you using?
What are your GAT settings and what windows tweaks are you using?

Windows Server 2003...

ABIT IC7
Cas 2-5-2-2
Street Racer
Enhanced
4
Enable
Enable

That was ran with with the services working ...In registry only IRQ8Priority=1 and Disable Paging Executive=1
Paging file at D: and 768 - 768MB

[EmineM]

wow, you must love your kingston bh6 pc2700 value ram.
Could you give me the week of these chips and the code on the sticker from kingston?

Very kind of you and excellent results!
Greece Powah :D

[hipro5]

Originally posted by EmineM
wow, you must love your kingston bh6 pc2700 value ram.
Could you give me the week of these chips and the code on the sticker from kingston?

Very kind of you and excellent results!
Greece Powah :D

The sticker isn't up ther any more......chips are 4 of them 238D and the other 4 are 239D on both of my Ram modules......

[EmineM]

are chips on both sides of the module or just one side?

[hipro5]

Originally posted by EmineM
are chips on both sides of the module or just one side?

Single side......

[EmineM]

the only valueram I have seen sofar here are dual side, damn seems I like I have to look harder :)

EDIT: what capictors did u use?

[hipro5]

Originally posted by EmineM
the only valueram I have seen sofar here are dual side, damn seems I like I have to look harder :)

EDIT: what capictors did u use?

100uF / 16V ...

[cold_ice]

Are you crazy ultron? 1,9v on a prescott :eek: :D
Nice results Hipro, I love your Ram mods

[RootX]

Originally posted by EmineM
very nice RootX, try Win2003 :). And.... is that 265 1:1 ? what timings?
Hi EmineM, :)

will give the 2003 server a go ;)
Mem is 2x512 pc3700EB, 1:1, 3-2-2-5@ 3.2V.
The AI7 i'm using is slower that the ic7 but i killed so many of them...

[EmineM]

nice to see you again RootX :)
let hipro mod urs then maybe no kill :p I killed 2 or so but thats due to condensation. Seems like I need ai7 or ic7 because my asus p4c800 limits me to 250fsb alto my EE does way more :)

[RootX]

Hehe, not sure if hipro is gonna mod another ic7 for me, the last one I killed was his backup mobo http://www.thelab.gr/images/smilies/redface.gif

If you go for the AI7, prepare to work on the prommie's cpu kit a little, cause the socket is in 45 degrees angle and obstructs it.

[SAE]

Wow. Hipro, impressive as always... :thumbsup:

But could you show us the complete ram... I wonder what you did to the front side of the sticks ;)

[hipro5]

Originally posted by SAE
Wow. Hipro, impressive as always... :thumbsup:

But could you show us the complete ram... I wonder what you did to the front side of the sticks ;)

There you go.......Simple things,not heavy duty stuff...... ;)

[hipro5]

...

[hipro5]

Trey are not like my older 512MB one......:D

[SAE]

Thanks. :)

Erm, but I also wondered what this solder joints on the upper edge of the stick are connected to... nearly looks like they are holding the heatplate ;)

Edit/

I already know the pic with the sinks/fans :D

Crazy... :lol:

[hipro5]

......or like this 256MB Pelted one..... :D

[hipro5]

Originally posted by SAE
Thanks. :)

Erm, but I also wondered what this solder joints on the upper edge of the stick are connected to... nearly looks like they hold the heatplate ;)

The front side heatsink is the Thermaltake cooper one......I've soldered it with the ground of my Ram so as to be grounded for RF reasons......

[EmineM]

holy :banana: :banana: :banana: :banana:. Very nice Hipro, could I send you a pic of my KHX PC3200 BH5 and would you work out some mods for that?
Thanks

btw RootX how did you mount the Mach II on the AI7 exactly.
Do you have a pic of your mod?

[RootX]

Originally posted by EmineM
btw RootX how did you mount the Mach II on the AI7 exactly.
Do you have a pic of your mod?

Sorry m8, no pic :(
What I did was to remove a bit(the curved one) from the socket handle and then trim the cpu kit in order not to be obstructed from the cpu socket...
Ain't that difficult, just make sure to insulate it properly with used seal string.

[TM30]

what a fuc*ing 3400+... under a mach 2... have to use my other 2 2 CG's .
but at least 33sek ;D
http://manner83.bei.t-online.de/bilder/benchmarks/pi3-28-06-04.gif

[aoc007]

Originally posted by TM30
what a fuc*ing 3400+... under a mach 2... have to use my other 2 2 CG's .
but at least 33sek ;D
http://manner83.bei.t-online.de/bilder/benchmarks/pi3-28-06-04.gif

Is that running EB? Very nice mem speed, try and up the core! :toast:

[Pro - Logic]

http://rosenson.mine.nu/upload/upload/38sek.jpg

[milan03]

My 3400+ 64bit and ocz 3500eb on vnf3 250, does it in 39sec. Stock speeds, etc... Is that any good?

[TM30]

Originally posted by aoc007
Is that running EB? Very nice mem speed, try and up the core! :toast:

no thats 1x512MB OCZ PC4400 EL Gold Ldt!

[SAE]

Originally posted by TM30
no thats 1x512MB OCZ PC4400 EL Gold Ldt!

Bad timings, huh? ;)

[TM30]

Originally posted by SAE
Bad timings, huh? ;)

2,5-4-4-8 .... (SPD)

no thats the crappy 3400+ ....:mad:

[twoPhases]

my 3500+ s939 and my asus av8 deluxe arrived today, but it's too late to test, it's 11.22pm.

[Nikita]

XP-M 2400+
NF7-S v2.0

http://www.hpautoelectrics.com/OverClocker73/XP-M%202400+/12.5x225%20super%20pi.jpg

[Nikita]

Update!!

http://www.hpautoelectrics.com/OverClocker73/XP-M%202400+/13x225%20super%20pi.jpg

[geneh_00]

I got 35s on mine A64 @ 245 x 10 Mhz OCZ EB @ 3-3-2-8 1:1

[centaur]

better than nothing:

[twoPhases]

Originally posted by centaur
better than nothing:
was hast du am epox gemacht um so einen hohen fsb zu bekommen?

[centaur]

ich hatte noch nie ein epox :D

my mobile run on a dfi lanparty nf2 ultra b. but i can't go higher with my watercooling

um bei englisch zu bleiben ;)

[SAE]

Originally posted by centaur
ich hatte noch nie ein epox :D

my mobile run on a dfi lanparty nf2 ultra b. but i can't go higher with my watercooling

um bei englisch zu bleiben ;)

:lol:

LP B rulez :D

[The Stilt]

Seems that my tweaks gained something ;)

http://mbnet.fi/elixir/3.2E/SPI-1M-28.PNG

And thats R404 Mach2 cooled.

[hipro5]

That looks good The Stilt :D

P.S. Any updates on the Datapage of the Super-Pi yet??.......The page seems to be missing or something....... :)

[EmineM]

very nice stilt, what mobo?

[The Stilt]

Originally posted by EmineM
very nice stilt, what mobo?

IC7-Max3 @ IC7-G Downgrade, VTT, VDDR mods, IC7-G 24 bios.

[EmineM]

did you just flash it to the abit ic7-g bios?

Why do that anyway?

[The Stilt]

Originally posted by EmineM
did you just flash it to the abit ic7-g bios?

Why do that anyway?

Yep, hexedited IC7-G bios. It must be edited because it wont go in if it hasnt been edited. IC7-G bios is littlebit faster and, its more gentle when it comes to GAT settings ;)

[hipro5]

Originally posted by The Stilt
Yep, hexedited IC7-G bios. It must be edited because it wont go in if it hasnt been edited. IC7-G bios is littlebit faster and, its more gentle when it comes to GAT settings ;)

It's slower than 22 or 21 ones.........check it out over Pi-fast or whatever..... ;)

[aoc007]

Whats the best IC7-G bios? The newest?

[KoGeR|Max]

at last :D

http://www.mainboard.dk/upload/files/33sek.jpg

[aoc007]

Shaved off another second with 5 more mhz on the fsb.
Thats on air with the top and rear fans in my PC-65 swapped out for 80mm tornados and a 92mm tornado on my SP-94. 1.85v set in bios.

[hipro5]

Originally posted by aoc007
Whats the best IC7-G bios? The newest?

As for me, it's the 21 and the 22 ones(the same)....

[The Stilt]

Originally posted by hipro5
It's slower than 22 or 21 ones.........check it out over Pi-fast or whatever..... ;)

Yep, you were right (again) :D
In SPI 8M Calculation Bios 24 (http://mbnet.fi/elixir/3.2E/IC7-24.PNG) is 3 seconds slower than Bios 22 (http://mbnet.fi/elixir/3.2E/IC7-22.PNG), clock to clock :)

Thanks for sharing this m8 :toast: