Finally sub 8s spi1M... 6ghz valid, 8m43s 32M

[luihed]

Not the most efficient run but brute mhz got me there:D .... This cpu has been though alot of beating the last few weeks so Im gonna let her rest for a while till I get some new hardware.....

specs:

QX9650 oem L742
DFI LP P35-T2R
Ballistix
2x raptors
DA750
My container

http://ocidb.com/albums/userpics/10062/normal_7969rgheg.PNG

http://ocidb.com/albums/userpics/10062/7_89.JPG

http://ocidb.com/albums/userpics/10062/normal_8_43.PNG

http://ocidb.com/albums/userpics/10062/normal_6000.jpg

Thought Ill try some 3d.... this speed is not close to max but I didnt spent too much time.... Not a bad score for X1950XT 256mb:D
http://ocidb.com/albums/userpics/10062/normal_77k.PNG
Compare URL (http://service.futuremark.com/compare?2k1=9317143)

http://ocidb.com/albums/userpics/10062/pot6g~0.JPG

Thanks for watching.... Thats it for now.....

[lukas69]

this chip 742 is good

[eva2000]

WOAH 6ghz validation and nice 32M time :D

[3oh6]

congrats on the sub 8s Lui...not even going to comment on the 32M because i know you are well on your way to crushing it :D

[Achill3uS]

wow, slow down :D
amazing chip, and very nice times :up:

[Pudi]

6Ghz OMG, that's one mighty impressive CPU!! :clap:

[mad_skills]

And who said UT P35 LanParty is not good for subzero..:D
Great score man, impressive.:up:

[luihed]

Thanks guys....

Theres a few more mhz to be had in this cpu but Ill wait till my new board comes ( DFI X38) cos I cant trust this mobo.... I was setting vcore starting at 1.6v + 122%, I was at 125% already and vcore was still at 1.95v... 126% got me to 2v finally then when I rebooted I opened up SG and it shows my vcore was at 2.04v:mad: .....


congrats on the sub 8s Lui...not even going to comment on the 32M because i know you are well on your way to crushing it :D

Aint gonna happen cos I ended up returning the DDR3 stix I got cos I couldnt stomach buying that certain mobo brand new.... The way I change my mind I should have been a women, not to mention Ill be an easy lay..... " buy me DDR3, me love you long time" lol.....

[AndreYang]

Be careful with Vcore. DFI Vcore is NOT the same as other mobos Vcore because it uses digital-pwm.

DFI Vcore 2V=ASUS 2.05~2.08V

Many people kill their chip because they use 1.95V+.

[massman]

Awesome results, Luihed, being a daredevil to push 2v through the chip :D

[luihed]

Thanks for the warning Andre, its always at the back of my mind but its so tempting when the cpu is scalling so well with vcore.... I think this cpu will do spi1M at 6ghz with 2.05v but Im not gonna find out anytime soon lol.....

[Oliver]

Really impressive champ, looks really good.

Now its time for wolfdale numbers, i now they will come from you ;).

Keep pushing it.

[g1raffe]

Very nice, well done on the 6ghz. :clap:

[before]

Nicely done! :)

[Solarfall]

damn those 45 nm chips rock.. excellent clocks there luided...again :D

[SoF]

:hehe: that voltage rockz - extremely nice :clap: :D

[Spacemaster]

Great speed man ;)

[Hyperhorn]

Congrats! :clap:
Sub8, 6Ghz Valid
That's a very special chosen round. :yepp:

[DFI pit bull]

Fantastic clock on the cpu, I want to see a 6Ghz 1m from soon please.

[systemviper]

Thanks guys....


" buy me DDR3, me love you long time" lol.....


What we will do to push the numbers, :rofl:

Your rock, great work!

[xwards]

very nice run :toast:

[George_o/c]

Congrats dude ;) :up:

[luihed]

Thanks guys... for how nice this cpu is for clocking high, its got one negative, low fsb :(.... cant get past 430fsb lol... hopefully its just a tweaking thing.... Got the sudden urge to play 3d, Im gonna hit the store and grab a 8800gts while its cheap.... Its been a while since I played 3dmark,( that 77k is my first score in a looong time) and honestly I dont even know what 3dmark06 looks like lol.....

[Gautam]

Damn damn sick speeds luihed! Seems like you've got a golden hand in picking chips. :D

[GiaXi]

very impressive pi.....you have disable 2core for takes the 6Ghz?---

2.04V---:eek:

[Bullet92]

omg man... this is...
...this is :shocked: impressive ...

well done man, keep going ;)

[dduckquack]

i seldom see 32m runs now but thats among the best!

[Brian y.]

and to think awhile back you were stressing hitting 5GHz w/ your E6600;)


Congrats:up: :clap:

[Misko]

Bravo luihed :up: blasting speed .

[bluep3ace]

very nice!

[luihed]

Thanks guys....

Finally got a vidcard worth playing 3d with :D First NV since ti4600 and Ive got to say theyve gone a long ways since then.... Cant believe a $270 card can do this kind of crap, 90K and Im still using the stock cooler lol.....

http://service.futuremark.com/compare?2k1=9318713

[ANP !!!]

Damn nice scores :eek:

[Blasar]

6GHz and a SPI 1M < 8 seconds.

:eek2: :hitself:

Congratulations for the awesome results. Still waiting for the next chapters, though. ;)

[Bullen]

really really nice :D

[THC]

Wicked ... 6Ghz ... :)

and fine pi results

[luihed]

Thanks guys....

This last few days has been hell for me but today Im a happy man once again....

I receive an DFI X38 board on Monday so I was eager to it out, but for some reason I cant get in Windows, both XP and Vista... After looking around, the HW monitor in the bios is showing my cpu temp at 127c:eek: put a probe beside the IHS and as I thought it was a misread and actual temp is normal... I disabled the shutoff feature and it let me into windows but a system process always loading all four cores, and since the process is "system" I couldnt shut it off no matter what... Tried it on 2 other boards with the same result and its pretty much confirmed the cpu is F*&%ked..... Also the cpu is lapped so no RMA .... Just for the record the DFI board has nothing to do with what happened...

Just now I finally found a way to shut it off. man what a scare and what a relief that I can bench with my cpu again.... Its still screwed up but aleast now I can bench with it, just need to do a couple things to run her right..... I think Ill smoke a fattie now:D

http://ocidb.com/albums/userpics/10062/sg9.jpg
http://ocidb.com/albums/userpics/10062/normal_sg4.PNG
http://ocidb.com/albums/userpics/10062/normal_sg6.PNG

[KTE]

Nice going there. :)

Errors: It could be the BIOS support for the CPU (unsupported, that's what it looks like, wrongly mapped sensor readings) or if the chip on two different Penryn supporting boards (tested) is giving screwed up readings with the chip then it's the chips internal registers and feedback itself that's flocked.
The System Idle is supposed to be at 99% as often as possible idling but SYSTEM is not supposed to consume any CPU cycles at idle. There's your problem.

You haven't been net connected without a av/fw, have you?

If you you run me this application and give me the log back in a PM or attach it, I'll let you know if I see anything wrong in terms of virus/spyware/hacker: http://www.trendsecure.com/portal/en-US/tools/security_tools/hijackthis

IHS temp will be 10-20C lower than the Tcase temp these monitoring software report, your measurement will always be lower unless you drilled a hole into the IHS to place the temp probe. ;)

[luihed]

Im pretty sure its the cpu thats screwed.... didnt have this issue before and Ive tried it on 3 motherboards now and it does the same thing... The P35-T2R ran it fine but now it doesnt, tried it on a P5K at the store I bought it from and same thing, we put in a diff QX and it ran fine on the P5K.... Im pretty sure this happened in the P35-T2R cos the last time I ran the QX there ( saturday) , I just finished the 3dmark run above then I couldnt get into windows after a reboot...I quit benching after that and didnt even realize something was wrong till monday....

[okorn]

OFF: how do u see all that in task manager?

[WeldZilla]

Hey Lui. I expect this type of benching from you. I always have.
Congrats, You never seice to amaze me over the years. Times like this I miss home and those radical bastards DMOS and Speed. Great job.
I have always been content to run very fast and stable. You on the other hand are one of the many reasons they make envelopes. guys like you were just born to push them! I would tell you tokeep pushing but that is like telling the sun to rise.... It ain't necessary, it's gonna happen!!

WZ

[luihed]

Hey bro, long time no see.... Thanks for the props, this would be alot sweeter if I can rub it all over SpeeD's face lol.... I pop in once in a while at the place we use to call home but its never the same and never will be... If there's one thing Id like to have back in OC land that would be it....

Nice to bump in to some old friends, I hunt down Cuf once in a while and Elisha is here sometimes, DMOS I havent seen since then...

[DJSUB]

Congratz Ama!
Pinoy PowaH! :up:

[Ming@s]

6.00 Ghz even very good, great and great CPU time for PI.

[disruptfam]

whats the vid on these 742's?

[Penguin463]

..... I think Ill smoke a fattie now:D



:rofl: :rofl: Thats always good :p: