TT Mozart TX & Thermochill Rads

[Evil-Fruits|R4z]

Just a quick query to those that have the Mozart, I know that the PA series Rads will not fit without some modding but, I don't want to cut the full back panel where all the fan mounts are so, I was wondering if it would be possible to dremel out the fan area and fit the Thermochill PA120.2 Fan grills over the cutout (would need re-drilling to mount thru the grill, case, fan and into the Rad) or will 2 not fit side by side allowing me to drill thru a part of the case.

Difficult to explain what I mean..?

Pic vvvvv I'll be cutting out the yellow and need to know the distance of the red line

http://img99.imageshack.us/img99/5200/03swnabackview450pu1.gif

Radgrill is this one but, obviously the 2x120 size

http://www.gammods.com.au/store/images/thermochill/fg1201b-375.jpg

Many thanks in advance

R4z

[Scubar]

The distance of that red line will be the same for all 120mm fans. Its the gap between the top and bottom fans and the gap between the side by side fans that will be interfering. Theres a template for the Thermochill PA120.2 that you will need to size up against the back of the case once youve got it.

[Evil-Fruits|R4z]

The distance of that red line will be the same for all 120mm fans. Its the gap between the top and bottom fans and the gap between the side by side fans that will be interfering. Theres a template for the Thermochill PA120.2 that you will need to size up against the back of the case once youve got it.

Thanks, thats cleared it up so, in that case does anyone know the distance between the two sets of fan mounting holes in the middle?

[Scubar]

Its around 15mm. When all the fans are mounted they are touching each other. so basically just get 4x120mm fans put them in a square and thats the back of the case.

I plan on mounting 2xMCR220s or 2xPA120.2s depending on which is less hassle. Ill be getting this case soon and im going to cut out the back of the case and rivet some 1mm acryan alu panel to the back and then drill mounting holes and the fan holes into that instead aswell as holes for the barbs to come through into the case. That way i can have the rads mounted outside but the barbs facing inside.

http://xs123.xs.to/xs123/08026/mozartplan898.png (http://xs.to)