QX9650 + P35-T2R + 8800GTS + Vapochill LS 56KW

[M3kk]

System specs:

CPU: QX9650 Retail
MB: DFI LP UT P35-T2R
RAM: 2x1GB Crucial Ballistix PC8500
VGA: Evga 8800GTS 512MB
PSU: Sirtec HP-500-A12S 500W !!
COOLING: Asetek Vapochill LS, moded by Dimas
OS: Windows XP SP2, basic tweaks.

5100 Valid : http://valid.x86-secret.com/show_oc.php?id=294914

Finally i managed to run my Qx9650 with P35-T2R properly, but i needed to use this 500W psu, with OP1000 and with ZM1200 i had troubles, LOL.

So, the results are :

PI1M Sub 9s - 8.984s :

http://www.crazypc.ro/forum/attachment.php?attachmentid=26752&d=1199907196

A Flat 9s :D

http://www.crazypc.ro/forum/attachment.php?attachmentid=26753&d=1199907196

Pi32, no tweaks, no nothing, just for fun, next time will be with higher clocks and with tweaks :).

http://www.crazypc.ro/forum/attachment.php?attachmentid=26760&d=1199907728

3DMark06 - The cpu not maxed out, next time :).

http://www.crazypc.ro/forum/attachment.php?attachmentid=26751&d=1199906712

3DMark05 - The cpu not maxed out, next time :).

http://www.crazypc.ro/forum/attachment.php?attachmentid=26758&d=1199907517

3DMark03

http://www.crazypc.ro/forum/attachment.php?attachmentid=26757&d=1199907279

3DMark01

http://www.crazypc.ro/forum/attachment.php?attachmentid=26759&d=1199907599

Aquamark3

http://www.crazypc.ro/forum/attachment.php?attachmentid=26762&d=1199908349

Fur Benchmark

http://www.crazypc.ro/forum/attachment.php?attachmentid=26763&d=1199908797.

[lukas69]

Nice score

[Solarfall]

great clocking there M3kk especially your ram clocks are freaking amazing :toast:
hey would be interesting to know the max fsb of your yorkie.. can you test it for us ??

[Timbosan]

awesome ram clocks @ CAS4 what was the vdimm? nice cpu clocks too & good scores hope to see more :up:

[clon22]

Nice 18k. :)

[GiaXi]

nice result....awesome frequency...

[SIOUX]

Very nice :toast: Are the CPu-z showing voltage right?? 1.9v on vapo ls .....whats the temps like??:) i had +29 with just 1.68v on vapo ls :D

[M3kk]

Thanks guys, Solarfall and Timbosan, what is so awesome with that ram frequencies? :D

[M3kk]

Very nice :toast: Are the CPu-z showing voltage right?? 1.9v on vapo ls .....whats the temps like??:) i had +29 with just 1.68v on vapo ls :D

Yep :D. I had near -50 idle, and like -25 load, or so. :D

[C-N]

Very nice & your RAM clocks are sick but in a good way :D

Keep it coming

CN :)

[M3kk]

Ok, but why? Memtest reporting wrong the ram clocks :D.

[C-N]

Ok, but why? Memtest reporting wrong the ram clocks :D.

"Why"

Because you may give me enough inspiration to drag my Vapo out the garage & go out & buy a 8800GTS G92 :D

Ye I know Memset is a tad off thats what the sick in a good way was about ;)

CN :)

[M3kk]

LOL, yes memset, every time i want to type memset but i`m typing memtest :D:D.

[quake6]

What was your voltage for memory?
Can you give 3v to your RAM? I have the same mbo I anything after 2.88v and mbo cant wake up...

[M3kk]

Why 3V ? I used maxim 2.5 or so.

[jimmyz]

:up: awesome runs, I just hit 5 ghz myself, there is a beta bios at DFI. so far so good. no 88 errors and cpuvtt is fixed.

[M3kk]

With silverstone cpus i still got 88 with qx9650 + this board. I need to use sirtec 500w if i want to bench qx9650 with this board :D.

[AngryArtichoke]

That is awesome, i need to sell my e6600 and get one

[DFI pit bull]

Nice results on the DFI, makes me want to mod my Mach2 now.

[Turrican]

nice score bro :toast:

[quake6]

Why 3V ? I used maxim 2.5 or so.

Well my board wont even wake up with 2.91v,so I though it is maybe just my board...I need more than 2.88v (until this point everything is ok,anything higher and mbo fail)

And your RAM can do 1426 with only 2.5v or program show different?

[Achill3uS]

nice results my friend :toast:

[bonzo_catalin]

I said over and over again that Sirtec it is a decent PSU .

Gratulalok M3kk , we wait other results from you .