Thermaltake Armor+ Super Tower , awesom

[koc]

http://www.thermaltake.com/product/Chassis/fulltower/armorPlus/+_image/03_S_angleView_450.gif

http://www.thermaltake.com/product/Chassis/fulltower/armorPlus/vh6000swa.asp#

the new case from thermaltake Dimension

old armor : 530 x 220 x 560 mm (H*W*D)

TJ-07 : 220 mm (W) x 560 mm (H) x 565 mm (D)

armor+ : 600 x 245 x 625 mm (23.6 x 9.6 x 24.6 inch)

Cooling System

- Front (intake) :
140 x 140 x 25mm blue LED fan, 1000rpm, 16dBA or
120 x 120 x 25mm fan
- Rear (exhaust) :
120 x 120 x25 mm TurboFan, 1300rpm, 17dBA
- Side (intake) :
230 x 230 x 20mm blue LED fan, 800rpm, 15dBA
- Bottom (intake) :
Two 140 x 140 mm fans (optional) or
Two 120 x 120mm fans (optional)
- VGA (intake) :
140 x 140 x 25mm fan 1000rpm, 16dBA or
120 x 120 x 25mm fan(optional)

Front I/O

e-SATA connector x 1, USB2.0 x 4, IEEE 1394 Firewire x 1, HD Audio

I ordered one alredy :D

[Scubar]

Old news, The plastic on top makes it looks really cheap and tacky. the old armor was alot sleeker and nicer looking.

[Chewbenator]

It's not old news, he bought it. And, I never found the armor series sleek.

That case IS HUGE!!! It's so big they added a handle just for the motherboard tray! I can't wait to see build picks.

[koc]

Maybe its old news

But it is new awesom case

[RPGWiZaRD]

Yea I really like this case and I didn't know it was THAT huge. I don't use a case atm but if I was it would be this one.

[The0men]

Yer it looks alright... But I have the original Armor Full tower, and its hard to mod, for watercooling and cable management... But that thing would be a nightmare... Especially with the plastic top, no chance of adding more or bigger fans, and certainly no chance of sticking a rad up there.

It looks alright, I just dislike the top, I wouldn't mind the huge sidefan, it would suck loads of air in, but kind of ruins the front to back airflow direction, which is why I didn't put that side on mine.

Get some pics of installing and when your done so we can see how she looks.

[koc]

What i like in this case is the Dimensions

600 x 245 x 625 mm (23.6 x 9.6 x 24.6 inch) , the case can handle all huge heatsinks and water tubes

Get some pics of installing and when your done so we can see how she looks.

No proplem :)

[Blasar]

Can this case be a better choice than a Stacker 832?

I´m going to buy a new case and i was thinking that the CM Stacker 832 is a good choice, but now....:confused:

What say you?

[magnum21]

Can this case be a better choice than a Stacker 832?

I´m going to buy a new case and i was thinking that the CM Stacker 832 is a good choice, but now....:confused:

What say you?

Just go with the stacker I have the original armor and the 832. The stacker is much better

[Blasar]

Just go with the stacker I have the original armor and the 832. The stacker is much better

Thanks for the reply. The stacker is expensive but it may compensate the difference, i guess.

Off-topic:
Just one more thing, i have a Tuniq Tower to cool the CPU, will it fit in a Stacker 832 with the side door

closed and the 4 side 120mm fans working?

TIA
Off-topic:

[Seer]

I seen that a lot of people have to take off the top left fan when big coolers are installed.

[magnum21]

Thanks for the reply. The stacker is expensive but it may compensate the difference, i guess.

Off-topic:
Just one more thing, i have a Tuniq Tower to cool the CPU, will it fit in a Stacker 832 with the side door

closed and the 4 side 120mm fans working?

TIA
Off-topic:

Its about the same size as my TRUE 120 so you prob cant use one of the fans. but the door will fit just fine

[systemviper]

I love my Armour, I am fitting a 120.3 in the front and have several solutions for anoher 120.2, so i think that with a little imagination, you can fit a lot in these cases.

[[XC] junglemaster]

Nice. I have the old Armor. I want this one!!! I have not seen it around at my shops yet...will keep an eye out for my next build though :D

[NOFX]

Thermaltake?
Plastic again?
Not my choice!

[PaRn ssR]

Out now Armor+
But I like Armor:clap:

[Zytek_Fan]

I'll admit that I like it.


...but it's not very moddable....

[PaRn ssR]

:down:

[SafeFire]

I agree, that case is just as awesome as your spelling.

[koc]

I agree, that case is just as awesome as your spelling

sorry , English is not my mother language , but im trying to learn more and more :) :)

[GARY1951]

Looks like a pretty nice case to me. Considering this case or the Armor Silver Aluminum SLI version