PDA

View Full Version : Chaintech 128MB Ti4200 Volt Mod

CCW
08-08-2003, 05:05 AM
I've done a search of the forums and theres only one thread on this. Apparently the card layout is different on this card so does anyone know where I will find a GPU and Mem volt mod guide for this card?

Thanks,
Craig
Hell-Fire
08-08-2003, 07:58 PM
Can ya take a pic of the back of the card noting anything that is written on ICs?

Or just tell us what ICs are present on the card.
CCW
08-08-2003, 11:58 PM
ICs? These are little chips right, what do they do?
blubbo
08-12-2003, 03:26 AM
It would help if you would post som pics. And yes you're right about the ICs. They do different things, we need to find those who control the vgpu and vmem.
Hell-Fire
08-13-2003, 03:38 PM
Originally posted by CCW
ICs? These are little chips right, what do they do?

They should be on the back of the card.

If we are lucky they will be one of the ones "we" are familiar with or can find a data sheet for so we can find the pins that need to have the VR connected to.

In my case, it was actually pin 5 versus the familiar pin 11 mod.

Look over the back of the card for ICs that have 14 pins...hopefully it will atleast follow mainstream design...and write down the letters and numbers of the ICs and either post a pic with ta diagram of which IC is which, or at the least give us the IC designators (letters and numbers :hehe:).