PDA

View Full Version : Hicookie and T_M - 3DMark'06 WR in Taiwan - Gigabyte X48T



T_M
12-25-2007, 09:26 AM
This weekend I travelled to Taiwan, where Gigabyte helped arrange some pre-release GA-X48T-DQ6 motherboard testing.

Teaming up with local overclocking master and good friend Hicookie (Team XtremeFastest), and with Gigabyte's newest flagship motherboards on hand, I was really excited to see what results we could achieve.

After a day of sight seeing/drinking, we set to task on Saturday afternoon in a hotel room putting together the system we hoped would take down the 3DMark'06 Single Card WR:

-Intel QX9650 Yorkield (Retail '39)
-Gigabyte GA-X48T-DQ6 Rev 1.1 unmodded - thanks Gigabyte Taiwan
-Patriot DDR3 PC3-15000 (1866MHz) rated @ 8-8-8-24 - thanks Patriot Taiwan
-XFX nVidia 8800GTS 512Mb G92 vGPU/vMem modded
-Gigabyte 'Odin' 1200W Quad SLI Ready PSU ;)
-Western Digital 500Gb SATAII running XP SP2

Cooling for the system above was based on:
-Kayl Rev2 CPU pot
-MickeyMouse GPU MousePot Rev?
-100L LN2 :yepp:

Some photos of the system for Saturday:

http://img.photobucket.com/albums/v310/T_M/IMG_2398.jpg

http://img.photobucket.com/albums/v310/T_M/IMG_2397.jpg

http://img.photobucket.com/albums/v310/T_M/IMG_2382.jpg

http://img.photobucket.com/albums/v310/T_M/IMG_2395.jpg

After a few hours of set-up, we had prepared a totally unmodified GA-X48T-DQ6 with vaseline coating all surfaces/contacts of components around the socket and NB, and insulated in the usual manner using foam sheet and then tube.
The video card came pre-prepared with a coating of enamel paint on entire rear surface and some front surface with clear nail polish. This card is a real animal as proven already on air and DICE, so i expected nothing less on LN2 than what we saw :D

So anyway, here you have it - new WR for single card in 3DMark 2006:.
Check out that shader clock :up:

22,586
http://service.futuremark.com/compare?3dm06=4326503
http://www.youtube.com/watch?v=UXP4qtquw04
http://img.photobucket.com/albums/v310/T_M/22586.jpg

We really pushed the system as hard as we could to obtain this result, with voltage on the GPU maxed before OVP/OCP kicked in (1.505V idle) and the CPU at 1.9V in BIOS (~1.85V after drop/droop). LOD was 15.
The vCPU was kept reasonably "low" because we wanted to avoid any problems with blowing mosfets which had plagued the X38/T-DQ6 series.

The following day (Sunday) we were focussed on the other 3D benchmarks, with #1 hwbot for GTS in all our target.
Again we prepped a very similar system, however this time we traded the Patriot DDR3 for Hicookies "magic" ADATA GTR stompers.
We also revised the insulation on video card pot a little, but generally the system was still the same.
Today we would end with pushing up the vCPU to really test the motherboard under extreme conditions. :)

http://img.photobucket.com/albums/v310/T_M/IMG_2431.jpg

http://img.photobucket.com/albums/v310/T_M/IMG_2437.jpg

And now for the results - #1 in all for 8800GTS 512Mb! :clap:
Unfortunately, FM havent approved 169.21 drivers for 3DMark'03, so we cant publish that result. All other results were fine though :shrug: :mad:

'05 - 30,985
http://service.futuremark.com/compare?3dm05=3821158
http://img.photobucket.com/albums/v310/T_M/30985.jpg

'03 - 60,259
http://img.photobucket.com/albums/v310/T_M/03ORB.jpg
http://img.photobucket.com/albums/v310/T_M/60259.jpg

'01 - 95,862
http://service.futuremark.com/compare?2k1=9306874
http://img.photobucket.com/albums/v310/T_M/95862.jpg

AM3 - 307,997
http://img.photobucket.com/albums/v310/T_M/307997.jpg

And now some action shots from the 5 days I spent in Taiwan, with my friends having a great time.
Really huge thanks to Tim from arranging all of this, and to Jensen for being involved.

Hicookie - you are truly an overclocking master in my eyes :clap: and really much of the success of the weekend can be attributed to your fine knowledge of troubleshooting crashes and tweaking performance :up:

Thanks also to my GF who accompanied me for the full 5 days, living in a hotel room doing "extreme TV" as hicookie says.

http://img.photobucket.com/albums/v310/T_M/IMG_2405.jpg

http://img.photobucket.com/albums/v310/T_M/IMG_2404.jpg

http://img.photobucket.com/albums/v310/T_M/IMG_2401.jpg

http://img.photobucket.com/albums/v310/T_M/IMG_2443.jpg

http://img.photobucket.com/albums/v310/T_M/IMG_2418.jpg

http://img.photobucket.com/albums/v310/T_M/IMG_2449.jpg

http://img.photobucket.com/albums/v310/T_M/IMG_2364.jpg

http://img.photobucket.com/albums/v310/T_M/IMG_2378.jpg

dpa
12-25-2007, 09:39 AM
the new GTS 512 is a monster! Good clocking there hicookie and T_M!!

1130Mhz... lol...

LowRun
12-25-2007, 09:45 AM
Good job guys, seems like you enjoyed your time there, would have liked to see the face of the members of the hotel crew when LN2 got there :D

ZoLKoRn
12-25-2007, 09:46 AM
Nice T_M :rocker: look like very fun, if i to be free maybe i'll probably lived that too hehehe... :D

Miss you two guy my good friend :)

Merry Christmas and Happy new year :bday2: :party:

Gautam
12-25-2007, 09:47 AM
Excellent clockin guys. :cool:

Droperidolum
12-25-2007, 09:52 AM
OMG! shader @ 2.86+ GHz !!! :shocked:
Whats vGPU, vMem?

Pedro Rocha
12-25-2007, 10:16 AM
http://bp3.blogger.com/_5ORdus3URKw/RniSCCqtWFI/AAAAAAAAAA8/vDGPos6_B-Q/s320/Congratulations0.jpg

Harshal
12-25-2007, 10:21 AM
Super clocking!!
And Congrats on Records!!
I see Tim [GB] also joined you guys for fun :)

eva2000
12-25-2007, 11:34 AM
wow congrats Tim & Hicookie - overclocking to that great scenic window view with 100L LN2 on hand!

Wonder what hotel patrons thought of that massive 100L LN2 tank :D That 1200W psu looks like it means business too :D

22.5k single card 3dmark06 and 95k 3dmark2001 :eek:

Just bloody amazing :up:

massman
12-25-2007, 12:32 PM
Ah, really awesome Tim :D. You teaming up with HiCookie was a very clever idea.

Thumbs up for You, HC and Gigabyte :)

G H Z
12-25-2007, 12:43 PM
Very good results guys, love that view while OC'ing :D :toast:

hey
12-25-2007, 01:10 PM
Mission completed:):down:

qballe
12-25-2007, 01:40 PM
amazing bench and very nice bench-room :D

Lightman
12-25-2007, 02:02 PM
Congratz guys!

Great scores! That is way of progress, one card and scores like from SLI setups couple of months ago :clap: !

mascaras
12-25-2007, 02:05 PM
congrats guys!! :up:

no doubt this new 8800GTS are realy good cards for benching

btw: T_M , did you test Max FSB of Gigabyte X48 ??

regards

blind_ripper
12-25-2007, 02:06 PM
nice team up guys , congrats on the great score :D

SIOUX
12-25-2007, 02:42 PM
Great clocking guys:toast:

eva2000
12-25-2007, 02:54 PM
Great clocking guys:toast:

but i can help noticing the Car low in 3d01 is TOO high for the clocks. I have a 100mhz more on CPU, and 200fps lower.....something is wrong there:)

its also 20fps faster than Hipro5 WR at 5766mhz.....so thats bugged more than usual:D
Run into car low low scoring bug ??? You using X38 or P35 chipset ?

artkobe
12-25-2007, 03:42 PM
hahah,guy,congratulations
and when will you come to china ag?
ps:i see cookie's TOUGH:D

T_M
12-25-2007, 05:36 PM
@ SIOUX - sorry mate i cant help you much there.
We ran 3DMark'01 and scored about the same 5+ times.
Maybe you should revisit your tweaks ;) Or run an exact same setup then compare.

@ Droperidolum - vGPU = 1.505V idle / vMem = almost stock (we didnt spend any time on mem)

@ mascaras - no sorry we didnt test max FSB for the board, we only tried 2 different QX9650's and both dont go above ~460-470.

The view was a pleasant backdrop compared to the blanks walls im used to.

eva2000
12-25-2007, 05:42 PM
congrats Tim for entering top 20 on hwbot.org HOF too :D

FUGGER
12-25-2007, 05:45 PM
Taiwan is nice place to visit for sure and will be back for Computex in the new building next year.

Nice view for overclocking, looks a bit wet out as always.

Is there a shot of the mobo from above to see the power and layout? '

Grats on the single card record push.

T_M
12-25-2007, 06:05 PM
Thanks Charles / George :)
I didnt take any mobo photos as we pretty much tore into things straight away.
Although i can take a couple shots for you of the ones in my living room tonight ;)

Think X38 with a couple minor mods like extra mosfets on backside ;)

I forgot to mention that the board is looking good for retail in week 1/2 '08 :D :D :D
Aint no backlog of old chipsets holding this company back heh ;)

The PSU was great until we tried running really high vCPU.
Unfortunately with a quad 12V rail design, and only 20A available to the motherboard it was giving weird reliability running the QX9650 at anything above 1.9V.
As Hicookie rightly said, this PSU is geared towards running tri/quad SLI in normal systems.

runmc
12-25-2007, 06:21 PM
You guys did a great job :up: congrats on your overclocks and cooling success. :clap:

T_M
12-25-2007, 06:45 PM
Speaking of cooling success, i'm in love with Kayl's hold-down plate for teh CPU pot.
I have NFI what material it is made from, but i've never ever seen before a plate that doesnt even get cold/wet/iced when under DICE or LN2.
This thing literally stays room temperature, meaning we didnt even have to mop up any condensation from the CPU pot for the 2 x 8hr benching sessions we ran!

T_M
12-25-2007, 07:13 PM
On the flip side, show me a similar system that gets a different score with the same tweaks we ran (usual LOD's and orders/reruns).

kayl
12-25-2007, 09:13 PM
Very nice work their T_M and hicookie :clap:
SO Tim, did tim (gig) help out with the ln2 :D

T_M
12-25-2007, 09:43 PM
Nah, all benching was solely Hicookie and I, and the LN2 was organised by Hicookie from his usual supplier.

Nordling
12-25-2007, 11:06 PM
http://img.photobucket.com/albums/v310/T_M/IMG_2437.jpg

http://i.smiles2k.net/big_smiles/big_smiles_296.gif awesom :up:

dinos22
12-25-2007, 11:28 PM
AWESOME you two :clap: :clap: :clap: :clap: :clap: :clap: :clap:




.........pm's the way to go for OT

wedfighter
12-26-2007, 12:09 AM
AWESOME !! :clap: :up: :clap: :up: :clap: :up:

T_M
12-26-2007, 12:17 AM
G92 + C L ;)

G H Z
12-26-2007, 12:36 AM
i'm in love with Kayl's hold-down plate for teh CPU pot.

Do you happen to know the name of the material?

dinos22
12-26-2007, 12:42 AM
Do you happen to know the name of the material?

i think kayl is using duniek's hold down plates :up:

T_M
12-26-2007, 12:49 AM
At a guess i'd say its that expanding foam that sets hard.
It is extremely light weight and easy to dent with your teeth :D.

dinos22
12-26-2007, 01:28 AM
HWBOT=examples of G92 with high CL

.........pm's the way to go for OT

T_M
12-26-2007, 01:41 AM
Dinos lays the smack down.
That exactly the case and what hicookie had already explained to me ;)

Zeus
12-26-2007, 04:43 AM
Hotelroom hardcore benching!

That G92 of yours is real kickass, did you try to lower the voltage on the graphics memory, for some this helps to get higher memory clocks.

Great hardware, great view, great scores! :up:

massman
12-26-2007, 04:58 AM
CL is in fact quite GPU dependant, more than most people think ... :)

SIOUX
12-26-2007, 05:04 AM
CL is in fact quite GPU dependant, more than most people think ... :)

try running an ultra on stock clocks, and then try overclocked...not so big difference:)

K404
12-26-2007, 05:39 AM
Thats crazy- both the location and the results- Genius and genius :D:D

Congrats on the scores guys- uberrrrrrrr impressive :D

To agree with a previous comment- Kayls pots use Dunieks hold-downs, and they're made of delrin :)

K

Oliver
12-26-2007, 06:35 AM
Looks really good guys and wow such a good view while benching, would love to be there and overclock.

Interesting about G92.

Keep pushing it.

Kinc
12-26-2007, 03:37 PM
Grats guys!! :toast:

Hicookie and his "hotchicks" haha :D

IvanAndreevich
12-26-2007, 07:44 PM
Right on. It's time somebody put a G92 under some LN2.

T_M
12-26-2007, 07:58 PM
Thanks everyone, we really enjoyed this session.

Interesting info, we ran both the CPU and GPU at -80 to -100C.
Both seemed to bug at -100C, but randomly we could go even colder.

dinos22
12-27-2007, 03:39 AM
hey guys looks like you've got some competition from the man himself ;)

check out HWBOT
heeeeeeeeeeeeeeeeeeeeeeeee's baaaaaaaack :D

welcome back Vince :D

T_M
12-27-2007, 03:42 AM
Now i just need to cherry a CPU :)

Zeus
12-27-2007, 03:55 AM
Now i just need to cherry a CPU :)

Check out the orb, first place for 8800gts512mb is gone as well for '06.

T_M
12-27-2007, 04:22 AM
first place for single G92 is still ours :D

Amey
12-27-2007, 04:51 AM
Congrats !! Excellent scores there :)

mcaff
12-27-2007, 05:30 AM
Well Done :clap:

Scimitar
12-27-2007, 10:04 AM
Absolutely insane SM2.0 score for a single card! With a good cpu, you should be able to take Kingpin out with his ULTRA.

hipro5
12-29-2007, 12:07 AM
Way to go guys..... :up:

Unfortunatelly (for you) :D Vince IS BACK in the track.....So I HAD to play with new hardware as well..... :D

23011 SINGLE XFX 8800 Ultra 2k6 Compare URL... (http://service.futuremark.com/compare?3dm06=4405099)

.

eva2000
12-29-2007, 12:39 AM
Way to go guys..... :up:

Unfortunatelly (for you) :D Vince IS BACK in the track.....So I HAD to play with new hardware as well..... :D

23011 SINGLE XFX 8800 Ultra 2k6 Compare URL... (http://service.futuremark.com/compare?3dm06=4405099)

.
LOL... the race is never ending huh :)

Zeus
12-29-2007, 12:44 AM
Way to go guys..... :up:

Unfortunatelly (for you) :D Vince IS BACK in the track.....So I HAD to play with new hardware as well..... :D

23011 SINGLE XFX 8800 Ultra 2k6 Compare URL... (http://service.futuremark.com/compare?3dm06=4405099)

.


Hahaha 23K, there's always Hipro5 to do some damage. :)

Seems like you enjoyed your new hardware buddy. ;)

massman
12-29-2007, 12:50 AM
Hoping for a response on that score, Hipro :)

hipro5
12-29-2007, 01:12 AM
Thanks guys..... :)


Hoping for a response on that score, Hipro :)

@massman : I hope so too for a response from the guys or Vince, so to have excitement again in benching.....:)