PDA

View Full Version : My first DIce session with 8800Ultra.18.9k'06/57.9K'03



nachthymnen
12-22-2007, 01:57 AM
This morning I've made my first DIce session with a vga.
Not very happy of my first run:(
Must to retry for find what's the problem.
I've benched with 1,44V real on the gpu.
Gpu shader "nude", no dissy on it.:(
Lost around 2 hours before to find a decent setting on the vga:(
Cpu liquidcooled by Ybris on this round.
For the end of january I'll re-bench with cpu under Cascade:D

SETUP:
Dimastech Benchtable
QX9650 L739A664
Asus Maximus SE(Bios 802)
MSI 8800Ultra Superclocked v-gpu mod by Zilla(1,44V for this session)
2x1GB Crucial Ballistix 8500
Topower 750W
Win Xp+sp2 dayly
Ybris ACS WB on CPU
Duniek's Alu Pot on GPU

http://www.pctunerup.com/up/results/_200712/20071222111942_Immagine002.jpg

http://www.pctunerup.com/up/results/_200712/20071222102101_Immagine006.jpg

http://www.pctunerup.com/up/results/_200712/20071222102116_Immagine008.jpg

http://www.pctunerup.com/up/results/_200712/20071222104428_Immagine010.jpg

Here's the results:

vga in idle with stock freq. stock voltage:
http://www.pctunerup.com/up/results/_200712/20071222105342_-30.jpg

3d'03=57924(low cpu freq.)
http://www.pctunerup.com/up/results/_200712/20071222105516_57924.jpg
http://service.futuremark.com/compare?2k3=5655361

3d'05=27715
http://www.pctunerup.com/up/results/_200712/20071222105604_27715.jpg
http://service.futuremark.com/compare?3dm05=3814570

3d'06=18964
http://www.pctunerup.com/up/results/_200712/20071222104103_18964.jpg
http://service.futuremark.com/compare?3dm06=4298416

SIOUX
12-22-2007, 11:54 AM
Looks like fun nachty:toast: Congrats on the first dice experience...:)

nachthymnen
12-23-2007, 12:27 AM
Looks like fun nachty:toast: Congrats on the first dice experience...:)

Tks Sioux:)
Not totally happy of the core clocks but is good for improve my experience for the next round:)
In february I'll retry with cpu under cascade:)

massman
12-23-2007, 12:35 AM
Good start, nachthymnen :)

nachthymnen
12-23-2007, 12:47 AM
Good start, nachthymnen :)

Tks Massman:)
My target was to pass the 850mhz core but this time no chance to do it:(
I've close just an Aquamark @ 845mhz but with cpu @ liquid was impossible to improve my actual record of 292k, so no screen saved.:rolleyes:

At the end of the 3d marks tests of yesterday I've do a fast PI with 1,6V on cpu under liquid:)
http://www.pctunerup.com/up/results/_200712/20071223094419_9.625liquido.jpg

Not push to the limit but this chip is not bad:)
Can't wait to test it @ -100C:p:

Some other's pict:
http://www.pctunerup.com/up/results/_200712/20071223183624_Immagine003.jpg

http://www.pctunerup.com/up/results/_200712/20071223183637_Immagine005.jpg

http://www.pctunerup.com/up/results/_200712/20071223183646_Immagine008.jpg

PPInDaHouse
12-23-2007, 07:20 PM
nice scores and frosty pics :D

MTP04
12-23-2007, 09:21 PM
Looking good for first time.:)

Keep going!

wedfighter
12-23-2007, 09:48 PM
not bad at all for 1st timer :up:

zanzabar
12-23-2007, 10:17 PM
nice score, u might want to get ram sinks and insulation next time though

nachthymnen
12-23-2007, 11:11 PM
Tks guys!
Yes, next time I'll use ram and gpu-shaders sink for sure:D
Also I will fix better the tube:rolleyes:
I can't imagine also a 3d'06 with my QX under Cascade:)

Dynasty
12-25-2007, 06:06 AM
nice work.........but bump voltage higher and try that ovp mod by hipro
should be good for 900mhz+ range on dice........:yepp:

lukas69
12-30-2007, 12:51 AM
Congratz Giorgio nice score
:up:

nachthymnen
01-22-2008, 01:17 AM
nice work.........but bump voltage higher and try that ovp mod by hipro
should be good for 900mhz+ range on dice........:yepp:

Tks friend:)
Well with 1,45+V vga is unstable:(
The contact between pot and gpu was not good:(

@ Lukas: Tks Luca:)