PDA

View Full Version : EVGA 780i + Q9550 ES + 2x EVGA 8800GTS 512


froste
12-20-2007, 06:52 PM
*Update: 12/21

I installed XP 32 bit and brought out my good G.Skill kit I have. Got up to 469 FSB bench stable with memory at 1154 MHz @ 4-4-4-5. Fedex should be here with my 9650 soon, will post results later.

Scored a little higher.

EVGA 780i motherboard, ES Intel Q9550 (8.5 multi), and 2x EVGA 8800GTS 512 (G92). All air cooled. No OS tweaks. Will do some testing with a QX9650 soon.

Test setup:
EVGA 780i
Intel Q9550 (YorkField) ES w/ stock P4 Intel cooler
2x1GB CL4 1066MHz G.Skill
2x EVGA 8800GTS 512 (G92) w/ stock cooler 100% fan
PC P&C 1KW
XP 64

CPU
FSB: 468MHz
Multi: 8.5

GPU's
Core: 810MHz
Shader: 1998MHz
Mem: 1053MHz (2106 effective)

06 score 21,433 points
http://img177.imageshack.us/img177/4975/run5bc2.png

speeds
http://img522.imageshack.us/img522/5752/speedsy1.jpg

volts
http://img522.imageshack.us/img522/342/voltkr4.jpg
DarthBeavis
12-20-2007, 06:59 PM
sweet!!!! great job.
Planet
12-20-2007, 08:43 PM
Looks good. Need to get a QX9650 and push it with some dry ice/ ln2.
S1mon-
12-20-2007, 08:50 PM
4Ghz on stock P4 cooler? Impressive :D
FUGGER
12-20-2007, 08:51 PM
Nice clocks on the G92 GTS cards
froste
12-20-2007, 09:03 PM
Nice clocks on the G92 GTS cards

Thanks:)



4Ghz on stock P4 cooler? Impressive

Looks good. Need to get a QX9650 and push it with some dry ice/ ln2.

I will bench same setup but with a QX9650 soon, first wtih a Zalman 9700 then hopefully I get a chance to do some DICE runs.
dinos22
12-20-2007, 09:06 PM
great work man

does ntune 6 allow you to change the volts?
lazy
12-20-2007, 09:22 PM
how were the temps using that stock coolor at 4GHz?
froste
12-20-2007, 09:25 PM
great work man

does ntune 6 allow you to change the volts?

Yes,
works fairly well for motherboard BIOS settings, though I did not use them that much as 468 FSB was my max for 3D stable. I can adjust fan speed of each GPU. The core and shader clock can be adjusted independtly which is good.
froste
12-20-2007, 09:27 PM
how were the temps using that stock coolor at 4GHz?

Idled in the high 40's, did not really check on load to be honest.
dinos22
12-20-2007, 09:41 PM
Yes,
works fairly well for motherboard BIOS settings, though I did not use them that much as 468 FSB was my max for 3D stable. I can adjust fan speed of each GPU. The core and shader clock can be adjusted independtly which is good.

i meant GFX card vcore volts
froste
12-20-2007, 10:12 PM
i meant GFX card vcore volts

The settings are there but its not adjustable.
froste
12-21-2007, 12:20 PM
Brought my good G.Skill out today, does 1154MHz @ 4-4-4-5. 3Dmark score is up a little, will throw QX9650 in this afternoon.

http://img177.imageshack.us/img177/4975/run5bc2.png