100k in 01 with Conroe + Singelcard!!! Foxconn MARS! [Archive]

dpa

12-07-2007, 03:50 PM

Finally I made it, done on a SWEET Foxconn MARS P35 board and with a very good E6700! Love this mars board more by the minute.. :D

Struggled a bit at the beginning, but this setup just flys!

http://service.futuremark.com/compare?2k1=9299733

Pics will come later on.. Here is a very close score.. :

dpa

12-07-2007, 05:55 PM

someone here that knows about the vdroop mod..? need it..! thanks is advance!

andre X_X

12-07-2007, 10:25 PM

very nice score... love the spi1m too :thumb:

here is the vdroop mod by shamino:

http://img214.imageshack.us/img214/7180/droophc6.jpg

you can see other mods here: http://www.xtremesystems.org/forums/showthread.php?t=164796
or http://www.quantum-force.net/

mcaff

12-07-2007, 11:16 PM

Damm nice results :woot:

massman

12-08-2007, 12:56 AM

Impressive DPA :)

PPInDaHouse

12-08-2007, 06:27 AM

Very nice runs my friend, next time you will break 100k single card ;)

Good Luck :)

dpa

12-08-2007, 06:42 AM

thanks all! next time I hope to get 100k, need 5.5Ghz and a good car low + right theme :D

My Ultra will not do 974 anymore.. did it once before.. Have to be happy with 945-960. Another thing is my nature, its pretty low compared to my other runs on the P5K-E card where I smasked 1070fps with same gfx clocks.

Solarfall

12-08-2007, 07:21 AM

very nice 3dmark01 run dpa :toast:

dpa

12-08-2007, 09:54 AM

ofcourse the orb is down... is my score on of the highest with Conroe + singelcard..?

aspstein

12-08-2007, 10:52 AM

Sick man just sick. :shocked:

Go get some more LN2 and get yourself that 100k score :D

Too bad this country have the highest prices for LN2 i have ever seen....

Anyone wanna guess :p:

Solarfall

12-08-2007, 11:13 AM

Sick man just sick. :shocked:

Go get some more LN2 and get yourself that 100k score :D

Too bad this country have the highest prices for LN2 i have ever seen....

Anyone wanna guess :p:

if its more than 9€ per liter that we have over here.. it has to be a heap loads more that that, considering norway is so gaddamn expensive country to shop :D

Zeus

12-08-2007, 11:40 AM

Great job, you're really knocking on the 100K door now, go for it man!

Nice CPU as well but i think you wasted too much ln² on superpi runs. j/k :D

Keep pushing it!

dpa

12-08-2007, 07:14 PM

I just made it.. Updated the headline :D

PPInDaHouse

12-08-2007, 07:17 PM

Congrats master dpa, finally you did it :D

Gautam

12-08-2007, 07:22 PM

Congrats! :clap:

S1mon-

12-08-2007, 09:38 PM

Damn am I crazy or I see 2V on the CPU voltage !!!

hipro5

12-09-2007, 12:18 AM

With an 6700 that's perfect... :)

dinos22

12-09-2007, 12:36 AM

G H Z

12-09-2007, 01:19 AM

Nice one dpa! :clap:

NeoForce

12-09-2007, 01:35 AM

Gratz!
Looks like Foxconn takes leading positions!

Zeus

12-09-2007, 01:42 AM

Well done DPA! congrats! :toast:

dpa

12-09-2007, 03:49 AM

looks like my golden E6700 is in the right hands ;)

now try 611*9 as this chip will have no problems whatsoever doing that FSB
but you may need to mod vcore to get your sticks to sing that high

i'm glad everything came together nicely and look forward to 5.6GHz runs next ;)

thanks all, this was really fun!!

I tried 9x dinos, but its no-go.. maybe some settings I overlook.. 5.6 aint happening.. hehe

One thing can happen, the VGA is good for 974/1240mhz through all the tests...

k|ngp|n

12-09-2007, 04:21 AM

Foxconn is owning every man, woman, and child.
Congratz on your 100k single and welcome to the club. I knew you could do it :D

dpa

12-09-2007, 04:23 AM

some pics of the "dry" setup.. mounted on my homemade in 10min table :D

dpa

12-09-2007, 04:24 AM

Foxconn is owning every man, woman, and child.
Congratz on your 100k single and welcome to the club. I knew you could do it :D

thanks man, that means alot.. (is there any locked 100k place at xs.org..? hehe, just kidding..)

Now I just need a good york.........

LardArse

12-09-2007, 04:28 AM

thats just really good benching! if you can bring vokts to 2.2v? u think it will scale the conroe?

dpa

12-09-2007, 05:10 AM

thats just really good benching! if you can bring vokts to 2.2v? u think it will scale the conroe?

just give me the vcore mod... :D (vcore is maxed in bios)

LardArse

12-09-2007, 05:16 AM

just give me the vcore mod... :D (vcore is maxed in bios)

ok, will do

misteroadster

12-09-2007, 05:29 AM

Great achievement :toast:

Stoolman

12-09-2007, 05:35 AM

Here are some pictures from yesterdays benchsession

http://i22.photobucket.com/albums/b347/stoolman/DSC_0026.jpg

Haakons (dpa) rig after 4 hours on LN2
http://i22.photobucket.com/albums/b347/stoolman/dprig.jpg
http://i22.photobucket.com/albums/b347/stoolman/DSC_0027.jpg

Here you have OC Norways new posterboy....dpa :D
http://i22.photobucket.com/albums/b347/stoolman/DSC_0043.jpg

We also had a little fan, who woke up in the middle of the night to check out the scene... Unfortunately, he didn't last long..its my son..

http://i22.photobucket.com/albums/b347/stoolman/DSC_0047.jpg

SF3D

12-09-2007, 05:38 AM

Great benching and nice pics.
100K with Conroe is really good achievement :up:

dpa

12-09-2007, 06:10 AM

thanks for the pics Stoolman, although I look kind of gay in that pic.. :rolleyes:

Foxconn MARS drying at my bathroom:

Zeus

12-09-2007, 06:35 AM

Is that ice on the PCI-E slot? Looks like a thick smear of vaseline.

Kaffebord

12-09-2007, 07:16 AM

Nice work DP!

dpa

12-09-2007, 07:20 AM

Is that ice on the PCI-E slot? Looks like a thick smear of vaseline.

its vaseline, at it is a must around there!

ojdr2001

12-09-2007, 08:03 AM

Congratz DPA... best 2001 run I ever seen... :clap: :clap: :clap:

I think you are alone in the 100k non yorkie single card club :up: :up:

:toast: :toast: :toast:

Stoolman

12-09-2007, 08:18 AM

thanks for the pics Stoolman, although I look kind of gay in that pic.. :rolleyes:

Foxconn MARS drying at my bathroom:

Well the Gay look is always with you my friend! :ROTF:

dpa

12-09-2007, 08:26 AM

Well the Gay look is always with you my friend! :ROTF:

whats best, ugly or gay..? :ROTF:

blind_ripper

12-09-2007, 09:39 AM

nice work dpa , idd looks like u are the one with a non york 100k+ single card out there :D

PPInDaHouse

12-09-2007, 11:01 AM

congrats again dpa, the foxconn Mars board is really impressive, now everybody has one :D

nachthymnen

12-09-2007, 11:22 AM

Finally you have broken the 100k my friend:up:
Fantastic result with this 6700!:eek: :clap:
Also very good pics:D

OT:my pot has arrived yesterday, tks:up:

Timbosan

12-09-2007, 04:02 PM

Simply awesome result, really impressive! :up: with 'only' an e6700 too! brilliant.

dinos22

12-09-2007, 04:17 PM

thanks all, this was really fun!!

I tried 9x dinos, but its no-go.. maybe some settings I overlook.. 5.6 aint happening.. hehe

One thing can happen, the VGA is good for 974/1240mhz through all the tests...

here is a screenshot of chip with a few pellets of DICE in tube and around -10C at the base of the tube

http://img502.imageshack.us/img502/8913/625mhz20validation20scrsl8.png

this chip scales really well with cold so you should be able to bench at 611 with your eyes closed as far as the chip is concerned

maybe the motherboard needs a bit more work on the bios side of things

dpa

12-09-2007, 05:43 PM

I ran with bios G28, could be that.. newest is G29.

G H Z

12-09-2007, 06:56 PM

I think you are alone in the 100k non yorkie single card club :up: :up:

Vince and hipro have both done it ;)

Gautam

12-09-2007, 07:01 PM

dinos22

12-09-2007, 07:38 PM

dpa is a very good tweaker
definitely in a league of his own at the moment :)

when he pushes the GFX card to the max and also finally gets 600+ FSB and high CPU clocks and 4-4-4-x timings this will add another 1K to the score EEK

ojdr2001

12-10-2007, 09:15 AM

Vince and hipro have both done it ;)

dont think so.... not with conroe

with yorkie anybody does it:D :D :D :D

bonzo_catalin

12-10-2007, 09:24 AM

What FPO-Batch E6700 has ?

Nice runs ;)

dpa

12-10-2007, 11:45 AM

What FPO-Batch E6700 has ?

Nice runs ;)

The 6700 is lapped, its Dinos old cpu.. ask him.

**dp**

mascaras

12-10-2007, 11:48 AM

well done DPA , great score with single card and E6700 :clap:

:up:

dpa

12-10-2007, 12:00 PM

well done DPA , great score with single card and E6700 :clap:

:up:

thanks man, it sure feels good :)

k|ngp|n

12-10-2007, 12:19 PM

:nono:

Vince made it to 99.1....don't remember George...either 96xxx or 98xxx. Single card past 100k is an amazing and very difficult achievement. Of course they've both smashed 100K with Conroes, but in SLi.

On 975x with 5350mhz Conroe/ ULTRA at 1040mhz/1230mhz + 158.22's I got that single card score :D,
Maybe I can grab an e6600 that does 600x9 for 01' and run it on P35 with an ULTRA at 1050mhz/1230mhz with the new drivers. Wonder what kind of score that would pull :D. Yorkie's just not a fair match it kills in 01.

Oliver

12-10-2007, 12:45 PM

Congrats, really impressive and great archivement there ;).

Sounds interesting Vince, go go go.

Keep pushing it.

dpa

12-10-2007, 12:56 PM

On 975x with 5350mhz Conroe/ ULTRA at 1040mhz/1230mhz + 158.22's I got that single card score :D,
Maybe I can grab an e6600 that does 600x9 for 01' and run it on P35 with an ULTRA at 1050mhz/1230mhz with the new drivers. Wonder what kind of score that would pull :D. Yorkie's just not a fair match it kills in 01.

do it! after that you send me your pot.. need it.. ;)

k|ngp|n

12-10-2007, 01:12 PM

do it! after that you send me your pot.. need it.. ;)

But then I will lose my unfair advantage dp lol ;)

dpa

12-10-2007, 01:16 PM

hehe...

I just ran 945/1230.. 1000Mhz is possible with your pot :)

but you wont send it to me, too bad..

k|ngp|n

12-10-2007, 01:17 PM

hehe...

I just ran 945/1230.. 1000Mhz is possible with your pot :)

but you wont send it to me, too bad..

1100mhz is possible with my pot :D

dpa

12-10-2007, 01:19 PM

1100mhz is possible with my pot :D

lol

that 1050 card of yours.. what kind of temp do you need to run that through nature in 01?

dinos22

12-10-2007, 01:32 PM

lol 1100MHz
what are you trying to do to poor Haakon hahahah

dinos22

12-10-2007, 01:33 PM

What FPO-Batch E6700 has ?

Nice runs ;)

The 6700 is lapped, its Dinos old cpu.. ask him.

**dp**

as per my sig ;)

k|ngp|n

12-10-2007, 01:46 PM

DINOS :)

lol

that 1050 card of yours.. what kind of temp do you need to run that through nature in 01?

Really depends on card, but to do 1050mhz or higher on a card that is capable of that speed, I think you will need lower than -95c. I killed that actual card that I did that single 01' run with. That card was a demon.
Imagine your score with 1100fps+ nature (http://service.futuremark.com/compare?2k1=9217761) :eek:

dpa

12-12-2007, 03:17 AM

my card runs 01 nature at 960 with -86C at det end.. starts at -95C. volt = 1.71 idle, 1.59-1.62v load. with -100degrees all the time, this card does 1000Mhz++.. :D

the card "coldbugs" at windows logon if the temp are below -80C.. 80.3C = artifacts all over the screen.. hehe

k|ngp|n

12-12-2007, 08:49 AM

dpa

12-12-2007, 12:01 PM

I see.. just send me a tek 9 3.0.. ;)

G H Z

12-15-2007, 12:22 PM

Vince made it to 99.1....don't remember George...

Damn stop making me look bad Vince :D

Here's hipro's 100K X6800 (http://service.futuremark.com/compare?2k1=9223145), either way...thats a killer result dpa :up:

Gautam

12-15-2007, 12:58 PM

Damn stop making me look bad Vince :D

Here's hipro's 100K X6800 (http://service.futuremark.com/compare?2k1=9223145), either way...thats a killer result dpa :up:

That's SLi...maybe you wouldn't keep getting hurt if you stopped trying to make me look bad. :lol:

Oh and Vince, I think someone needs a chill pill. ;)