X1800XT- Testing cpu dryice vga at air

[BeardyMan]

Setup:
------
E6850 @ 1.688V dryice, new cpu pot ;)
ASUS P5K-E vcore mod, not needed for now :)
Crucial ballistix PC6400
X1800XT

3Dmark01- previous WR 63K, new WR -->:D
at 4800Mhz, 1.688V--783/855
68048 (http://service.futuremark.com/compare?2k1=9294416)

3Dmark03-Previous WR 25889, new WR-->:D
at 4700,1.688V--783/837
25987 (http://service.futuremark.com/compare?2k3=5623128)

Aquamark03 - 167040-- should go down soon.:D
at 4800Mhz,1.688V--783/837

3Dmark05 - 12651 (http://service.futuremark.com/compare?3dm05=3726208)(WR 13026), short on GPU power, will go down soon :D
at 4800Mhz--1.688V--783/855

3Dmark06 -6386,(WR 6414) short on GPU power and cpu power lol, will go down soon :D
at 4800Mhz--1.688V--783/855

I can bench every bench at 4800mhz without any problems at 1.688V, so i assume it wil be easy to improve all other benches except 06 :)
Don't know wheter i'm going to freeze the card again or perhaps i might send it to a teammate for some heavy coldness loving :D

[ownage]

Any pictures of the action?, including that new cpu pot? :D

[BeardyMan]

No not this time :D
New cpu pot? where :D

[ownage]

No not this time :D
New cpu pot? where :D

Not the Evo copy??

[BeardyMan]

Not the Evo copy??

I never made a copy only mixes of different containers :D

This was my last container,
and the last one is my new, basicly the same but square for mounting and pouring purposes also no alu used :) Paid around the same price and better performance (few degrees at load and idle ) Same internals a stupid cross :D

[Nazu]

I didn't remember that X1800XT was that weak :eek: I mean like compared to the 7900/X1900 series...

[FrederikV]

That are some nice scores! Good job!

[BeardyMan]

Thx ^^

[Cranox]

Congrats on the WR's steven

[BeardyMan]

70.6K 3Dmark01 WR (http://service.futuremark.com/compare?2k1=9294898)
done at 5.226ghz ;)
27331 3Dmark03 WR (http://service.futuremark.com/compare?2k3=5624237)
Aquamark 03 at 172582 WR done at 5.226ghz
3Dmark06 at 6495 WR done at 5226ghz have to upload that though :)

[Oliver]

Congrats on the WRs did you move on to LN2? :D.

[BeardyMan]

Congrats on the WRs did you move on to LN2? :D.

For cpu i did :D
VGA i didn't, container is back to the machinist for some refining :D

Something walled today, but i can't blame the cpu though, board was left unmodded so i'm a happy man today :D

Cold bug at 136°C, superpi and 3Dmarks al fly at 5300mhz without any probs :)
from -130 to -95.9...
Pouring on this container is a dream i can assure you that, full control to the 0.1degree.

[Oliver]

Okay and that is a good cpu you have there :).

Keep pushing it.

[BeardyMan]

Okay and that is a good cpu you have there :).

Keep pushing it.

Nah selling it :D

Mid december i will be ready for QX9650 action :D

First my mboard needs some Resistor loving..