Concept Cascade 1 Worklog , By lolhalol and my friend

[lolhalol]

Ok guys as what the title says, Cascade building worklog.
extremeocer ( my firends online alias) and i will be building a concept cascade,

Reason why i call it Concept Cascade is because it still in a conceptual stage. Its unique in a way , I'm going to fit a normal SS into the same case as a Dual cascade. And fit it into the smallest case possible. AFAIK i have not seen any dual cascades and SS in the same case.

http://i66.photobucket.com/albums/h252/lolhalol/20%20November/DSC09198.jpg
The case measures W34 x H44 x L54 .

I know the case need some work but what i really wanted was the base, as its made out of 2mm steel so its really solid and sturdy. Itll be using three rotary compressors and a 120mm condenser for the SS and 30cm condenser for the cascade.

Anyway this is gonna be one heck of a long project, as i wont be starting work on the real unit until February 2008, now its just the design and planning stages. Like all the pipe work, placement, gases to use, and collecting components.

ok some conceptual drawings of placements and pipe work,

http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/cascade1.jpg

http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/cascade2.jpg

http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/cascade3.jpg

http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/cascade4.jpg

http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/cascade5.jpg

http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/cascade6.jpg

http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/cascade2modified.jpg

any questions can be posted directly here in this thread pls..

diameter is 4cm, height is 5cm . this is a my own modified impression of the ssilencer evaps. i did not get a ssilencer evap to measure, nor do i even knw wat the measurements are. im just taking some ideas form it. hope u dun mind bro.

the evap head that will go into this cascade and SS..


http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/conceptevap1.jpg

[lolhalol]

finalised the compressors that i will be using with extremeocer. will be three 1 hp matsu:banana::banana::banana::banana:a electronics compressors.. adn some home made condensors...

http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/rotary.jpg




neway extremeocer did some tests...
to test the evaps, bench rig.
http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/Cascade_new2.jpg

done with r22 low side and r410a on the high side... this should be the gases i wil be using in my cascade when its done...
http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/rr22_r410.jpg


teh cascade
http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/Cascade_new3.jpg


, got -75 C unloaded. and -63 C loaded. Using a e6600 , clocked at 4.3 @1.65 v.
temps were measured from the suction line. didn't get to measure from teh evap , ,,

[lolhalol]

Some updates on the mounitng for the evap... thx DUNIEK .. very nice stuffs u sent me.. :)

the center hole for the evap has not been drilled , because i still havent finalised the design. any ideas guys? should i got chilly style for the Cascade? and stepper for the SS ?

http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/27-11-07_1553.jpg

and heres the whole package.. :)

i call them yao ming, allen iverson and iversons younger brother. ::P

http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/27-11-07_1552.jpg